Skip to content

#industry

Keywords by Co - Occurrence

  1. Marco Giancarlo, Lombardi Davide (2025-10)
    A Streamlined Decentralised Workflow for Obtaining Specific Mechanical Performance and Grade of 3DPC:
    Towards the Standardisation and Industrialisation of 3DCP
  2. Couque Pierre, Carneau Paul, Corvez Dominique, Tanant Julien et al. (2025-10)
    3D Printed Concrete - Applications for the Industry:
    Latest Feedback from France
  3. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
    Industrial Waste in 3D Printed Concrete:
    A Mechanistic Review on Rheological Control and Printability
  4. Marco Giancarlo, Lombardi Davide, Dounas Theodoros, Agkathidis Asterios (2025-09)
    A Theoretical Framework for the Standardisation and Industrialisation of 3D Concrete Printing Through Decentralised Science
  5. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
  6. Banihashemi Saeed, Akbarnezhad Ali, Sheikhkhoshkar Moslem, Haouzi Hind et al. (2025-08)
    3D Printing in Construction:
    Sustainable Technology for Building Industry
  7. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
    Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
    Rheological Properties and Practical Applications
  8. Flor-Unda Omar, Toapanta Carlos, Fuentes Mauricio, Rivera Mario (2025-07)
    Additive Manufacturing Technologies:
    Advances for the Construction Industry
  9. Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
    3D-Printed Earth-Fiber Envelopes:
    Optimization of Thermal Performance and Industrial Applicability
  10. Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
    Advances in Sustainable Additive Manufacturing:
    A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
  11. Latifiilkhechi Leva, Aminbakhsh Saman, Akcay Emre (2025-03)
    Investigating the Barriers to the Adoption of 3D Printing Technology in the Turkish Construction Industry
  12. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-03)
    Possibilities for Reducing the Environmental Impact in the Construction Industry Using the Example of a 3D Printed Staircase
  13. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
    Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
  14. Srivastava Manu, Walker Ian (2024-12)
    Continuum Soft Robots with Applications in the Construction Industry
  15. Forcael Eric, Medina Moisés, Opazo-Vega Alexander, Moreno Francisco et al. (2024-11)
    Additive Manufacturing in the Construction Industry
  16. Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
    Multi-Model-Based Additive Manufacturing:
    A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
  17. Gürel Şeyma, Chen Wei-Ting, Wangler Timothy, Lloret-Fritschi Ena et al. (2024-09)
    Scaling up in Digital Casting of Concrete:
    Towards Industry Integration
  18. Monkman Sean, Hernandez Margarita, Moreno Daniel (2024-09)
    A Case Study in Industrialized 3D Printing:
    A One Hundred Home Community Near Austin, Texas
  19. Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
    Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry
  20. Chaudhari Ojas, Johansson Jan, Haage Mathias, Sjölander Andreas et al. (2024-09)
    3D Printing-Strategy and Implementation for Concrete Prefabrication Industry in Sweden
  21. Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
    A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
    State of the Art and Future Directions
  22. Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
    Selection of Digital Fabrication Technique in the Construction Industry:
    A Multi-Criteria Decision-Making Approach
  23. Lu Ming, Wu Hao, Yuan Philip (2024-05)
    Optimization for Industrial Robot Joint Movement in Non-Horizontal 3D Printing Application
  24. Alcayaga Restelli Adolfo, Avudaiappan Siva, Arrué Muñoz Ramón, Canales Cristian et al. (2024-04)
    Tailings as a Sustainable Resource in 3D Printed Concrete for the Mining Industry:
    A Literature Review
  25. Rojas Jorge, Hasanzadeh Sognad (2024-03)
    Novel Digital Twin Architecture for 3D Concrete Printing in the AEC Industry
  26. Calderon-Cordova Carlos, Sarango Leonardo, Chamba Dennis, Sarango Roger et al. (2023-12)
    Performance-Analysis of Motion-Control-Algorithms of an Industrial-Robot-Arm Applied to 3D Concrete Printing Systems
  27. Braumann Johannes, Singline Karl, Schwab Martin (2023-11)
    Visual Programming for Robot-Control:
    Technology Transfer Between AEC and Industry
  28. Kurniati Eka, Kim Heejeong (2023-10)
    Utilizing Industrial Byproducts for Sustainable Three-Dimensional-Printed Infrastructure Applications:
    A Comprehensive Review
  29. Mallikarjuna Balichakra, Hareeswar M., Sharath P. (2023-09)
    Applications of Additive Manufacturing in Construction and Building Industries
  30. Routray Krutika, Saha Sunirmal (2023-09)
    The Economic Impact of Additive Manufacturing Industries
  31. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  32. Chougan Mehdi, Kheetan Mazen, Ghaffar Seyed (2023-07)
    Additive Manufacturing and the Construction Industry
  33. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
    A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
  34. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
    Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
  35. Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
    3D Printing of Limestone-Calcined-Clay-Cement:
    A Review of Its Potential Implementation in the Construction-Industry
  36. Kazemian Ali, Seylabi Elnaz, Ekenel Mahmut (2023-03)
    Concrete 3D Printing:
    Challenges and Opportunities for the Construction Industry
  37. Tahmasebinia Faham, Jabbari Amir, Skrzypkowski Krzysztof (2023-03)
    The Application of Finite Element Simulation and 3D Printing in Structural Design Within Construction Industry 4.0
  38. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
    Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
    A Scientometric Review
  39. Uddin Md (2022-12)
    Influence of 3D Printable Sustainable Concrete and Industrial Waste on Industry 5.0
  40. Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
    Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
  41. Placzek Gerrit, Schwerdtner Patrick (2022-12)
    A Preliminary Study of the Impact of Robotic Systems on Concrete 3D Printing in the Construction Industry
  42. Ahadi Bahram, Valiente López María (2022-11)
    Use of Nitinol-Shape Memory Alloy in the Reinforcement of 3D Concrete Printing Industry
  43. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
    Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
    A Critical Review
  44. D'Haese Romain, Carpentier Olivier, Dubois Vincent, Chafei Sawsen et al. (2022-10)
    3D Printable Materials Made with Industrial Byproducts:
    Formulation, Fresh and Hardened Properties
  45. Chandrasekar Ravekumar, Gkantou Michaela, Nikitas Georgios, Hashim Khalid et al. (2022-10)
    Integration of 3D Concrete Printing in the Construction Industry:
    A Short Review
  46. Raza Muhammad, Zhong Ray (2022-08)
    A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
  47. Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
    Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications
  48. Ren Chuangnan, Hua Dongliang, Bai Yonghui, Wu Shuang et al. (2022-06)
    Preparation and 3D Printing Building Application of Sulfoaluminate-Cementitious-Material Using Industrial Solid-Waste
  49. Lloret-Fritschi Ena, Quadranti Elia, Scotto Fabio, Fuhrimann Lukas et al. (2022-05)
    Additive Digital Casting:
    From Lab to Industry
  50. Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
    Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
  51. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  52. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
  53. Shakor Pshtiwan, Chu Shaohua, Puzatova (nee Sharanova) Anastasiia, Dini Enrico (2022-01)
    Review of Binder-Jetting 3D Printing in the Construction Industry
  54. Yin Jian, Suo Yiru, Lv Tao, Ma Kaisi et al. (2021-12)
    Application of 3D Printing Technology in the Construction Industry and Its Development Prospects
  55. Sesetti Harika, Lalithya Muthina, Kumar Pala (2021-10)
    3D Concrete Printing in Construction Industry:
    A State of the Art
  56. Rollakanti Chiranjeevi, Prasad C., Joe Adams (2021-10)
    Digital Concrete for Sustainable Construction Industry:
    A State of the Art Review
  57. Olsson Nils, Arica Emrah, Woods Ruth, Madrid Javier (2021-10)
    Industry 4.0 in a Project Context:
    Introducing 3D Printing in Construction Projects
  58. Munir Qaisar, Peltonen Riku, Kärki Timo (2021-08)
    Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams
  59. Oktaviani Astiti, Berawi Mohammed (2021-07)
    Implementation of 3D Concrete Printing Technology in Pre-Cast Concrete Mass Production Industry
  60. Leite Gabriela, Fontana Marcele (2021-07)
    Additive Manufacturing and the Evolution of the Construction Industry:
    A Systematic Literature Review 2015-2021
  61. Adaloudis Max, Bonnin Roca Jaime (2021-05)
    Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry
  62. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
    Additive Manufacturing in the Construction Industry:
    The Comparative Competitiveness of 3D Concrete Printing
  63. Mullett Paul, Ghaffar Seyed, Perry Paul (2021-04)
    Discussion:
    Commentary on 3D Printing Set to Transform the Construction Industry
  64. Vojir Martin, Myslivec Tomáš, Petr Tomas, Břoušek Josef et al. (2021-03)
    A New Way to Design Software for Industrial Automation:
    3D Printer Cement Mixtures
  65. Sandeep Bolugoddu, Kannan T., Chandradass J., Ganesan M. et al. (2021-02)
    Scope of 3D Printing in Manufacturing Industries:
    A Review
  66. Pradhananga Piyush, ElZomor Mohamed, Santi Kasabdji Gabriella (2021-02)
    Identifying the Challenges to Adopting Robotics in the US Construction Industry
  67. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
    3D Printing in the Construction Industry:
    A Systematic Review of the Thermal Performance in Buildings
  68. Ramadany Mohamed, Bajjou Mohamed (2021-01)
    Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
    A Case Study
  69. Sepasgozar Samad, Shi Anqi, Yang Liming, Shirowzhan Sara et al. (2020-12)
    Additive Manufacturing Applications for Industry 4.0:
    A Systematic Critical Review
  70. Sharma Shivam, Mitra Soham, Adesina Adeyemi, Das Sreekanta (2020-09)
    Construction Industry with 3D Printer:
    A New Era
  71. He Rui, Li Mingkai, Gan Vincent, Ma Jun (2020-08)
    BIM-Enabled Computerized Design and Digital Fabrication of Industrialized Buildings:
    A Case Study
  72. Muishout Chantal, Coggins Tom, Schipper Roel (2020-07)
    More Than Meets the Eye?:
    Robotisation and Normativity in the Dutch Construction Industry
  73. Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
    A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry
  74. Gaudillière-Jami Nadja, Dirrenberger Justin, Duballet Romain, Bouyssou Charles et al. (2020-04)
    Industrialising Concrete 3D Printing
  75. Freire Tiago, Brun Francis, Mateus Artur, Gaspar Florindo (2019-11)
    3D Printing Technology in the Construction Industry
  76. Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
    Extrusion-Based Additive Manufacturing of Concrete Products:
    Revolutionizing and Remodeling the Construction Industry
  77. Davila Delgado Juan, Oyedele Lukumon, Ajayi Anuoluwapo, Akanbi Lukman et al. (2019-07)
    Robotics and Automated Systems in Construction:
    Understanding Industry-Specific Challenges for Adoption
  78. Avrutis Daniel, Nazari Ali, Sanjayan Jay (2019-02)
    Industrial Adoption of 3D Concrete Printing in the Australian Market
  79. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
    Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
  80. Heever Marchant, Bester Frederick (2018-11)
    3D Printing of Concrete within the South African Building and Construction Industry
  81. Ghaffar Seyed, Mullett Paul (2018-09)
    Commentary:
    3D Printing Set to Transform the Construction Industry
  82. Liu Jingkuang, Li Guokai (2018-08)
    Research on the Development of 3D Printing Construction Industry Based on Diamond-Model
  83. Delgado Camacho Daniel, Clayton Patricia, Brien William, Seepersad Carolyn et al. (2018-02)
    Applications of Additive Manufacturing in the Construction Industry:
    A Forward-Looking Review
  84. Shakor Pshtiwan, Renneberg Jarred, Nejadi Shami, Paul Gavin (2017-07)
    Optimization of Different Concrete Mix Designs for 3D Printing by Utilizing 6DOF Industrial Robot
  85. Delgado Camacho Daniel, Clayton Patricia, Brien William, Ferron Raissa et al. (2017-07)
    Applications of Additive Manufacturing in the Construction Industry:
    A Prospective Review
  86. Krimi Imane, Lafhaj Zoubeir, Ducoulombier Laure (2017-05)
    Prospective Study on the Integration of Additive Manufacturing to Building Industry:
    Case of a French Construction Company
  87. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review
  88. Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
    A Critical Review of the Use of 3D Printing in the Construction Industry
  89. Perkins Isaac, Skitmore Martin (2015-03)
    Three-Dimensional Printing in the Construction Industry:
    A Review
  90. Braumann Johannes, Brell-Cokcan Sigrid (2012-12)
    Digital and Physical Tools for Industrial Robots in Architecture:
    Robotic Interaction and Interfaces
  91. Soar Rupert (2005-11)
    Additive Manufacturing Technologies for the Construction Industry