Skip to content

#distribution

Keywords by Co - Occurrence

  1. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
  2. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
  3. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
    Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
  4. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  5. Zhang Qiuju, Li Yujia, Huang Yuefan, Li Yangbo et al. (2025-04)
    Utilizing 3D Printing and Distributed Optic Fiber to Achieve Temperature-Sensitive Concrete
  6. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
    Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
  7. Zhao Shuai, Zhou Ran, Luo Mingming, Liu Jianfei et al. (2024-12)
    Distributed Fiber Optic Sensing System for Vibration Monitoring of 3D Printed Bridges
  8. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
    Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
  9. He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
    A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
  10. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
    Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
  11. Yoshihara Rei, Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2024-04)
    Evaluation of Aggregate-Distribution Heterogeneity in 3D Printed Concrete by Means of X-Ray CT
  12. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
  13. Duan Zhenhua, Deng Qi, Xiao Jianzhuang, Lv Zhenyuan et al. (2024-01)
    Experimental Realization on Stress-Distribution Monitoring During 3D Concrete Printing
  14. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
    Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
  15. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
    Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
  16. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
    Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
  17. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
    Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
  18. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-03)
    Improving Homogeneity of 3D Printed Cementitious Material-Distribution for Radial Tool-Path
  19. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei (2023-02)
    Effects of the Distribution of Solid Particles on the Rheological Properties and Buildability of 3DPM Fresh Pastes with Different FA/GGBFS Content
  20. Yang Rijiao, Zhu Yi, Lan Yan, Zeng Qiang et al. (2022-10)
    Differences in Micro Grain & Fiber-Distributions Between Matrix and Inter-Layer of Cementitious Filaments Affected by Extrusion-Molding
  21. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
    Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
  22. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
    Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
  23. Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
    Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution
  24. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
    Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
  25. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
  26. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
    Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
  27. Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2020-10)
    A Systematic Review of the Geographic and Chronological Distributions of 3D Concrete Printers from 1997 to 2020
  28. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
    Lightweight Concrete 3D Printing by Selective Cement-Activation:
    Investigation of Thermal Conductivity, Strength and Water-Distribution
  29. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
    Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
  30. Wangler Timothy, Scotto Fabio, Lloret-Fritschi Ena, Flatt Robert (2019-09)
    Residence-Time-Distributions in Continuous Processing of Concrete
  31. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
    A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
    Materials and Construction Technology
  32. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
    Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
  33. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
  34. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
  35. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
    Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
  36. Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
    Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing