Skip to content

#shape

Keywords by Co - Occurrence

  1. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
    Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
    Method and Application to Extruded Blocks and 3D-Printed Walls
  2. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
    Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
  3. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
  4. Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
    Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
  5. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
    Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
    A Design Method for Printing-Friendly Structure
  6. Han Seongho, Addai-NImoh Alfred, Gu Yucun, Khayat Kamal (2025-10)
    Enhanced Shape Stability of Flowable Mortar Through CO2 Injection for 3D Concrete Printing Application
  7. Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2025-10)
    ShapeGen3DCP:
    A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
  8. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
    Innovative Reinforcement Techniques for 3D-Printed Concrete:
    The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
  9. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
    Clay and Alginate-Based Mixtures 3D Printing:
    A Numerical Procedure for Shape Stability and Buildability Assessment
  10. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
    Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
  11. Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
    Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
  12. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  13. Sando Mona, Stephan Dietmar (2025-02)
    The Role of Mixing Sequence in Shaping the 3D-Printability of Geopolymers
  14. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
    Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
  15. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
    Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
    From Material-Design to Structural Bearing-Capacity-Assessment
  16. Aziz Saqib, Alexander Bradley, Gengnagel Christoph, Loutfi Jamila (2024-12)
    Minimal Mineral ‑ Rethinking Ceiling Systems:
    Shaping the Future of Sustainable Construction
  17. Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
    Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity
  18. Forcael Eric, Alucema Contreras Elena, Burkart Medina Adolfo, García-Alvarado Rodrigo et al. (2024-12)
    Comparative Study of Visual Programming Procedures for 3D Concrete Printing of Different Geometric Shapes
  19. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
    3D Printing of Ultra-High-Performance Concrete:
    Shape Stability for Various Printing Systems
  20. Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
    Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator
  21. Shakur Emad, Shaked Adaya, Amir Oded (2024-09)
    Topology and Shape-Optimization of 3D Pre-Stressed Concrete Structures
  22. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
    EarthWorks:
    Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
  23. Cook Kieron, Çapunaman Özgüç, Gürsoy Benay (2024-09)
    Robotic Sand Shaping for Reusable Formworks:
    From Tool-Path Design to Emergent Shapes and Patterns in Cast Form
  24. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
  25. Park Gwang, Kim Jae (2024-09)
    Optimization Shape Stability for Printed Pre-Cast Column Using Matric-Suction-Effect
  26. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
    Self-Supporting Lamellae:
    Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
  27. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
    Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
  28. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
  29. Alhussain Ali, Duarte José, Brown Nathan (2024-02)
    Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing
  30. Nan Cristina, Vigorito Alessio (2024-02)
    Exploring 3D Concrete Printing of Lattice Structures on Robotically-Shaped Sand Formwork for Circular Futures
  31. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
    Advancing 3D Concrete Printing for Affordable Housing:
    A Shape Grammar-Based Approach to Print Spanning-Roof Structures
  32. Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
    Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures
  33. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
    Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites
  34. Breseghello Luca, Talaei Ardeshir, Florenzano Daniele, Naboni Roberto (2023-09)
    Shape-Env:
    Camera-Enhanced Robotic Terrain-Shaping for Complex 3D Concrete Printing
  35. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
    Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
  36. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
    Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
  37. Geffrault Anatole, Bessaies-Bey Hela, Roussel Nicolas, Coussot Philippe (2023-08)
    Printing by Yield-Stress Fluid-Shaping
  38. Bello Nicholas, Memari Ali (2023-06)
    A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
  39. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
    Approach for Sustainability-Assessment for Footbridge Construction Technologies:
    Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
  40. Lootens Didier (2023-01)
    Giving Shape and Functionality to the Matter:
    Digital Construction
  41. Ahadi Bahram, Valiente López María (2022-11)
    Use of Nitinol-Shape Memory Alloy in the Reinforcement of 3D Concrete Printing Industry
  42. Abstoß Marvin, Rudolph Enrico, Funke Henrik, Gelbrich Sandra (2022-09)
    Near-Net-Shape-Extrusion and Milling of Complex Concrete Elements for the Production of Moulds
  43. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
  44. Lee Jin, Kim Jae (2022-06)
    Matric-Suction and Its Effect on the Shape Stability of 3D Printed Concrete
  45. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
    Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
  46. Lee Jin, Kim Jae (2022-05)
    Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar
  47. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
    Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
  48. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
    Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
    Experimental and Numerical Studies
  49. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
    Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
  50. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
  51. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
    Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
  52. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
    Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
    A Review
  53. Bhooshan Shajay, Mele Tom, Block Philippe (2020-11)
    Morph & Slerp:
    Shape Description for 3D Printing of Concrete
  54. Archez Julien, Texier-Mandoki N., Bourbon X., Caron Jean-François et al. (2020-08)
    Adaptation of the Geopolymer Composite Formulation Binder to the Shaping Process
  55. McGee Wesley, Ng Tsz, Yu Kequan, Li Victor (2020-07)
    Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC-SHCC)
  56. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
    Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
  57. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
    A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete
  58. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
    A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar
  59. Ham Namhyuk, Lee Sanghyo (2019-01)
    Project Benefits of Digital Fabrication in Irregular-Shaped Buildings
  60. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
    Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars
  61. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
    The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
  62. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
    Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
  63. Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
    Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells
  64. Bhooshan Shajay, Mele Tom, Block Philippe (2017-09)
    Equilibrium-Aware Shape Design for Concrete Printing
  65. Kazemian Ali, Yuan Xiao, Meier Ryan, Cochran Evan et al. (2017-06)
    Construction-Scale 3D Printing:
    Shape Stability of Fresh Printing Concrete
  66. Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2016-07)
    Large-Scale 3D Printing of Complex Geometric Shapes in Construction
  67. Khoshnevis Behrokh, Dutton Rosanne (1998-01)
    Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials