Skip to content

#form

Keywords by Co - Occurrence

  1. Subramaniam Kolluru, Maganty Sohanth, Kamakshi Tippabhotla, Ghandhi Dhruv et al. (2025-12)
    Design and Deployment of a Functionally Efficient 3D-Printed Concrete Bridge Developed by Form Optimization
  2. Knychalla Bruno, Wiesner Christian, Sonnleitner Patrick, Kowalczyk Magdalena et al. (2025-12)
    Integrated Fiber Forms:
    Functionally Integrated Slab Systems Through Additive Manufacturing and Natural Fiber Reinforcement
  3. Kloft Harald (2025-12)
    Digital Building Fabrication – The Path Towards the Unity of Material, Process and Form:
    A Personal Reflection from Research and Practice
  4. Anastassiou Richard, Alvarado Rodrigo, Wegertseder Martínez Paulina (2025-11)
    Towards Climatomorphism:
    A Generative Optimization Framework for Climate-Adaptive 3D-Printed Free-Form Housing
  5. Subramaniam Kolluru, Singh Prashant, Maganty Sohanth, Paritala Spandana (2025-10)
    Form Optimization Applications of 3D Concrete Printing:
    From Bridge to Protective Structures
  6. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
  7. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
  8. Chovghi Frederic, Richter Christiane, D'Acunto Pierluigi (2025-07)
    Fabrication-Aware Structural Form-Finding for Additive Manufacturing:
    An Equilibrium-Based Approach
  9. Liu Nana, Wang Jie (2025-07)
    Experimental Study on the Effect of Water-Binder Ratio on 3D Printing Form of Concrete Mortar
  10. Divya M., Riza S., Shariff Najeeb (2025-06)
    Characterization of Cold Joint Formation in Digitally Printed Mortar During the Dormant Phase:
    A Time-Dependent Study
  11. Xiao Yinan, Hack Norman, Kloft Harald, Lowke Dirk et al. (2025-03)
    Constraint-Based Form-Finding of Space Trusses for Injection 3D Concrete Printing Through Vector-Based Graphic Statics
  12. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
    Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
  13. Hlobil Michal, Michel Luca, Pundir Mohit, Kammer David (2025-03)
    A Thermo-Hygro Model to Determine the Factors Dictating Cold Joint Formation in 3D Printed Concrete
  14. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
    Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
  15. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
    Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
  16. Cook Kieron, Çapunaman Özgüç, Gürsoy Benay (2024-09)
    Robotic Sand Shaping for Reusable Formworks:
    From Tool-Path Design to Emergent Shapes and Patterns in Cast Form
  17. Ojeda Juan, Grebner Philipp, Knaack Ulrich, Rosendahl Philipp (2024-09)
    3D Printing with WAAM to Form and Stiffen Lightweight Steel Panels for Freeform Façades
  18. David Martin, Dröder Klaus (2024-09)
    Robot-Guided End Effector for an Automated Finishing of Concrete Free-Form Surfaces
  19. Wüchner Roland, Warnakulasuriya Suneth, Asl Reza, Bletzinger Kai-Uwe et al. (2024-09)
    Free-Form Structural Optimization for Additive Manufacturing in Construction
  20. Chousou Georgia, Yoo Angela, Jipa Mihail-Andrei, Dillenburger Benjamin (2024-08)
    Cadenza:
    3D Printed Formwork for a Free-Form Stair
  21. Chovghi Frederic, Richter David, Dörfler Kathrin, D'Acunto Pierluigi (2024-08)
    Reconsidering the Historical Cap Ceiling:
    Layerwise Form-Finding of Self-Supporting Vaulted Structures for In-Situ 3D Printing
  22. Kinomura Koji, Zhang Wenbo, Kawamura Keisuke (2024-07)
    Structural Performance of a Large Column with an Outer Shell Formed by Short-Fiber-Reinforced Mortar-Extrusion
  23. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
    Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
  24. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  25. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
  26. Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
    Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing
  27. Freund Niklas, Dörrie Robin, David Martin, Kloft Harald et al. (2023-10)
    Enclosing Reinforcement Structures in Shotcrete 3D Printing:
    The Effect of Reinforcement Geometry and Accelerator Dosage on the Formation of Voids
  28. Zuo Zibo, Corte Wouter, Huang Y., Zhang L. et al. (2023-08)
    Measurement of the Density of Formed Structures for Concrete 3D Printing
  29. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
    Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
  30. Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
    Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
  31. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
    Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
  32. Tošić Zlata, Eichenauer Martin, Ivaniuk Egor, Lordick Daniel et al. (2022-07)
    Design and Optimization of Free-Form Surfaces for Modular Concrete 3D Printing
  33. Bos Derk, Wolfs Robert (2022-06)
    Automated Visual Inspection of Near-Nozzle Droplet-Formation for Quality-Control of Additive Manufacturing
  34. Weger Daniel, Talke Daniel, Lowke Dirk, Henke Klaudius et al. (2022-06)
    Additive Manufacturing of Free-Formed Concrete Elements by Selective Binding with Calcium Silicate-Based Cements
  35. Park Min, Cheon Gain, Alemayehu Robel, Ju Young et al. (2022-04)
    Seismic Performance of F3D Free-Form Structures Using Small-Scale Shaking Table Tests
  36. Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
    The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms
  37. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
    Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
    A Review on Recent Progresses
  38. Lv Xuesen, Qin Yao, Liang Hang, Cui Xuemin (2021-07)
    Effects of Modifying-Agent on Rheology and Workability of Alkali-Activated Slag-Paste for 3D Extrusion-Forming
  39. Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
    A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping
  40. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
    Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
  41. Lim Jian, Zhang Xu, Ting Guan, Pham Quang-Cuong (2021-02)
    Stress-Cognizant 3D Printing of Free-Form Concrete Structures
  42. Afarani Hajar, Carroll William, Garboczi Edward, Biernacki Joseph (2020-11)
    Designing 3D Printable Cementitious Materials with Gel-Forming Polymers
  43. Son Seunghyun, Oh Jinhyuk, Park Kwangheon, Kim Sunkuk (2020-10)
    Production Planning of Free-Form Concrete Panels Using 3D Plastering Technology
  44. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
    3D Concrete Printing:
    Free-Form Geometries with Improved Ductility and Strength
  45. Adilenidou Yota, Ahmed Zeeshan, Bos Freek, Colletti Marjan (2019-10)
    Unprintable Forms
  46. Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
    Revisiting Folded Forms with Digital Fabrication
  47. Hirayama Yuta, Zhang Jiali, Kawahara Yoshihiro (2019-06)
    A Method to Evaluate the Formability and Fluidity of Concrete-Based Materials for 3D Printing
  48. Serdeczny Marcin, Comminal Raphaël, Pedersen David, Spangenberg Jon (2019-05)
    Numerical Simulations of the Mesostructure Formation in Material-Extrusion Additive Manufacturing
  49. Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
    Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle
  50. Xu Jie, Ding Lieyun (2018-07)
    Volume-Forming 3D Concrete Printing Using a Variable-Diameter Square Nozzle
  51. Secrieru Egor, Khodor Jad, Schröfl Christof, Mechtcherine Viktor (2018-05)
    Formation of Lubricating Layer and Flow Type During Pumping of Cement-Based Materials
  52. Secrieru Egor, Cotardo Dario, Mechtcherine Viktor, Lohaus Ludger et al. (2018-04)
    Changes in Concrete Properties During Pumping and Formation of Lubricating Material Under Pressure
  53. Son Seunghyun, Lim Jeeyoung, Kim Sunkuk (2018-03)
    Planning Algorithms for In-Situ Production of Free-Form Concrete Panels
  54. Michel Matthias, Knaack Ulrich (2014-12)
    Fundamentals of Development for Adaptive Formwork for Free Formed Concrete Shells and Walls
  55. Perrot Arnaud, Mélinge Yannick, Estellé Patrice, Lanos Christophe (2009-04)
    Vibro-Extrusion:
    A New Forming Process for Cement-Based Materials