Skip to content

#ash

Keywords by Co - Occurrence

  1. Dewi Melati, Wang Wei-Chien, Lin Wei-Ting (2026-03)
    Development of Low-Thermal-Conductivity Fly Ash Geopolymer Foam Mortars with Stabilizer Effects and 3D Printability Assessment
  2. Zia Syed, Yuan Yong, Irfan ul Hassan Muhammad, Sheng Ruyi et al. (2026-03)
    Influence of Sugarcane Bagasse Ash on the Workability and Mechanical Behaviour of 3D-Printed Mortar
  3. Koedmontree Porntipa, Thanakulwuttiporn Phachara, Wongwian Laksameekarn, Jai-Inta Pruksa et al. (2026-02)
    Development of High-CaO Fly Ash-Based Alkali-Activated Mortar for 3D Printing Technology
  4. Peng Yiming, Unluer Cise (2026-02)
    Thixotropic and Mechanical Behavior of MgO-SiO2 Pastes Incorporating Rice Husk Ash for Extrusion‐Based 3D Printing
  5. Dvorkin Leonid, Marchuk Vitaliy (2026-02)
    Modified Ash-Containing Construction Mixtures for 3D Printing
  6. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
    Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
  7. Liu Fang, Wang Haiwei, Zheng Xinchao, Hu Xueting et al. (2026-02)
    Study on the Workability and Mechanical Influencing Factors of 3D-Printed Coal Gangue-Fly Ash-Based Geopolymers
  8. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
    Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
    Effects of Low Water-Binder Ratios on Workability and Strength
  9. Sapata Alise, Spuriņa Ella, Alzard Mohammed, Šlosbergs Pēteris et al. (2026-01)
    Low-CO2 Concrete from Oil Shale Ash and Construction Demolition Waste for 3D Printing
  10. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
    Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete
  11. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
    Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
  12. Iqbal Imtiaz, Inqiad Waleed, Kasim Tala, Besklubova Svetlana et al. (2025-12)
    Strength Characterisation of Fly Ash Blended 3D Printed Concrete Enhanced with Explainable Machine Learning
  13. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
  14. Cai Xianhuan, Chen Fan, Zhao Zhihui, Xiao Peng et al. (2025-12)
    Impact of Early Particle Characteristics on Rheology and Buildability in 3D-Printed Magnesium Silicon Potassium Phosphate Cement Incorporating Fly Ash
  15. Tao Jie-Lin, Hu Shengming, Duan Zhenhua, Jiao Dengwu (2025-11)
    Magneto-Responsive Flow Behavior and Early-Age Microstructural Evolution of 3D Printing Lightweight Concrete with Fly Ash Cenospheres
  16. Zhang Jiao-Long, Yuan Yong, Fatoyinbo Imoleayo, Zhou Lujie et al. (2025-11)
    3D-Printable Mortars Incorporating Municipal Solid Waste Incineration Bottom Ash:
    Linking Hydration to Extrudability and Mechanical Performance
  17. Maroszek Marcin, Rudziewicz Magdalena, Shah Syed, Tran Doan et al. (2025-11)
    Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste
  18. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
    Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
  19. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
    Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
  20. Vico Lujano Raúl, Pérez Villarejo Luis, Novais Rui, Hidalgo-Torrano Pilar et al. (2025-07)
    Optimized Mortar Formulations for 3D Printing:
    A Rheological Study of Cementitious Pastes Incorporating Potassium-Rich Biomass Fly Ash Wastes
  21. Joshi Arpan, Gaspar Florindo, Archbold Paul, Silvestre José (2025-07)
    Study on the Composition of Mortars Based on Forest Biomass Fly Ash for Sustainable 3D Printing
  22. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
    Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
  23. Mishra Sanjeet, Upadhyay Bikash, Das Bibhuti (2025-06)
    3D Printing Aspects of Fly Ash and GGBS Admixed Binary and Ternary Blended Cementitious Mortar
  24. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
    Enhancing 3D Printed Concrete Through Waste Fly Ash:
    A Comprehensive Approach to Sustainable and Efficient Mix Design
  25. Sapata Alise, Šinka Māris, Puzule Līga, Plūmiņš Ernests et al. (2025-05)
    Developing Low-CO₂ 3D-Printable Concrete with Waste Ash and Recycled Aggregates
  26. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
    A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete
  27. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
  28. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
    Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
  29. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
    Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
  30. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
    Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
  31. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
    Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
    Emphasis on Rheological and Microstructural Properties
  32. Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
    Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates
  33. Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
    Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites
  34. Hanžič Lucija, Štefančič Mateja, Šter Katarina, Zalar Serjun Vesna et al. (2025-01)
    Collision Milling of Oil Shale Ash as Constituent Pretreatment in Concrete 3D Printing
  35. Alam Shaurav, Gordon Stephen, Bassett Blake, Cobb Kevin et al. (2025-01)
    Three-Dimensional Printing of Fly-Ash-Based Geopolymer Materials
  36. Dai Xiaodi, Kandy Sharu, Neithalath Narayanan, Kumar Aditya et al. (2024-11)
    Thermally Stimulated Stiffening and Fly-Ash’s Alkaline-Activation by Ca(OH)2 Addition Facilitates 3D Printing
  37. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
    Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
  38. Li L., Fang Z., Chu S., Kwan Albert (2024-11)
    Improving Mechanical Properties of 3D Printed Mortar by Exploiting Synergistic Effects of Fly-Ash-Microsphere and Nano-Silica
  39. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Kara Burhan, Bebek Özkan et al. (2024-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures Through Addition of Mineral Admixtures
  40. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
    Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
  41. Asensio Eloy, Fenàndez F., Cabello Z., Álvarez O. et al. (2024-09)
    Low-Clinker ECC Materials Using Biomass Ash for 3D Printing
  42. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Bajāre Diāna et al. (2024-09)
    Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash
  43. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
    Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing
  44. Dvorkin Leonid, Marchuk Vitaliy, Makarenko Ruslan (2024-08)
    Mechanochemical-Activated Fly-Ash Concrete Suitable for 3D Printing
  45. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
    Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
  46. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
    A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
    An Experimental and Numerical Approach
  47. Sando Mona, Stephan Dietmar (2024-06)
    The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
  48. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
    Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
  49. Mohamed Ibrahim, Senthil Kumar (2024-05)
    3D Printed Concrete Using Portland-Pozzolana-Cement:
    Fly-Ash-Based
  50. Taqa Ala, Mohsen Mohamed, Aburumman Mervat, Naji Khalid et al. (2024-05)
    Nano-Fly-Ash and Clay for 3D Printing Concrete Buildings:
    A Fundamental Study of Rheological, Mechanical and Microstructural Properties
  51. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
    Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
  52. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
    Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
  53. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
    Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
  54. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
  55. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
    Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
  56. Ding Tao, Shen Kaige, Cai Chen, Xiao Jianzhuang et al. (2024-02)
    3D Printed Concrete with Sewage Sludge Ash:
    Fresh and Hardened Properties
  57. Jesus Manuel, Teixeira João, Alves Jorge, Pessoa Ana Sofia et al. (2023-10)
    Potential Use of Sugarcane-Bagasse-Ash in Cementitious Mortars for 3D Printing
  58. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
    Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
    Rheological and Quasi-Static Mechanical Characteristics
  59. Lu Bing, Zhao Huanyu, Li Mingyang, Wong Teck et al. (2023-10)
    MgO/Fluid Catalytic Cracking Ash-Blends for 3D Printing on Vertical Surfaces
  60. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
  61. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
  62. Villaquirán-Caicedo Mónica, Fernández-González Alejandro, Fernández-García Daniel, Gutiérrez Ruby (2023-07)
    Valorization of a Low-Quality Coal-Ash, in the Preparation of Alkali-Activated Inks for Applications in 3D Additive Manufacturing
  63. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-07)
    Extrusion and Structural Build-Up of 3D Printing Cement-Pastes with Fly-Ash, Nano-Clay and VMAs
  64. Joshi Arpan, Carvalho Tomás, Gaspar Florindo (2023-04)
    Incorporation of Forest Biomass-Based Fly-Ash in Cement for 3D Printing
  65. Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
    Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar
  66. Malipeddi Reshma, Adiseshu S. (2023-01)
    Impact of Unique Mixing Methodology on Macro and Microstructural Characteristics of Concrete Containing Slag and Fly-Ash
  67. Dvorkin Leonid, Konkol Janusz, Marchuk Vitaliy, Huts Andriy (2022-12)
    Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly-Ash
  68. Lu Bing, Li Hongliang, Li Mingyang, Wong Teck et al. (2022-11)
    Mechanism and Design of Fluid Catalytic Cracking Ash-Blended Cementitious Composites for High-Performance Printing
  69. Melichar Jindřich, Žižková Nikol, Brožovský Jiří, Mészárosová Lenka et al. (2022-11)
    Study of the Interaction of Cement-Based Materials for 3D Printing with Fly-Ash and Superabsorbent Polymers
  70. Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
    3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone
  71. Tao Jie-Lin, Lin Can, Luo Qiling, Long Wujian et al. (2022-07)
    Leveraging Internal Curing Effect of Fly-Ash-Cenosphere for Alleviating Autogenous Shrinkage in 3D Printing
  72. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
    Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
  73. Kamakshi Tippabhotla, Subramaniam Kolluru (2022-06)
    Developing Printable Fly-Ash-Slag Geopolymer Binders with Rheology Modification
  74. Samad Nur, Abdullah Siti, Ibrahim Mustaffa, Shahidan Shahiron et al. (2022-05)
    Initial Properties of 3D Printing Concrete Using Rice-Husk-Ash as Partial Cement Replacement
  75. Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
    Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar
  76. Yang Huashan, Che Yujun (2022-01)
    Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials
  77. Kilic Ugur, Yang Yang, Ma Ji, Ozbulut Osman (2021-12)
    Rheological and Thermal Characterization of 3D Printable Lightweight Cementitious Composites with Fly-Ash-Cenospheres
  78. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
    In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
    Application in Alkali-Activated Fly-Ash-Slag Geopolymers
  79. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
    Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
  80. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
    Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
  81. Ki Dongwon, Kang Shin, Park Kwang-Min (2021-07)
    Upcycling of Wastewater Sludge Incineration Ash as a 3D Printing Technology Resource
  82. Kondepudi Kala, Subramaniam Kolluru (2021-02)
    Formulation of Alkali-Activated Fly-Ash-Slag Binders for 3D Concrete Printing
  83. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
    Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
  84. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
    Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
  85. Rehman Atta, Lee Sang-Min, Kim Jung-Hoon (2020-06)
    Use of Municipal Solid-Waste Incineration-Ash in 3D Printable Concrete
  86. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
    Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
  87. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
    A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
  88. Peng Yiming, Ma Kunlin, Long Guangcheng, Xie Youjun (2019-08)
    Influence of Nano-SiO2, Nano-CaCO3 and Nano-Al2O3 on Rheological Properties of Cement-Fly-Ash-Paste
  89. Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
    Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent
  90. Alghamdi Hussam, Nair Sooraj, Neithalath Narayanan (2019-02)
    Insights into Material-Design, Extrusion Rheology, and Properties of 3D Printable Alkali-Activated Fly-Ash-Based Binders
  91. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
  92. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
    Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay
  93. Lu Bing, Li Mingyang, Qian Shunzhi, Leong Kah et al. (2018-05)
    Develop Cementitious Materials Incoporating Fly-Ash-Cenophere for Spray-Based 3D Printing
  94. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
    Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
  95. Panda Biranchi, Tan Ming (2018-03)
    Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing