Skip to content

#resistance

Keywords by Co - Occurrence

  1. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
    Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
  2. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
    Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
  3. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
    3D Printed Concrete with Recycled Coarse Aggregate:
    Freeze-Thaw Resistance Assessment and Damage Mechanisms
  4. Mansouri Abraham, Mourad Bahaa, Birhane Bezawit, Denbel Nuhamin et al. (2025-11)
    Noncontact Measurement of Thermal Resistance in 3D Concrete Printing Building Envelopes Using Infrared Sensing and Arduino
  5. Givkashi Mohammad (2025-11)
    Durability of 3D Printed Concrete Containing Air-Entraining Agent:
    Evaluating the Importance of Carbonation Resistance
  6. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
    Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
  7. Singh Amardeep, Yang Song, Wang Dianchao, Xiao Jianzhuang et al. (2025-09)
    Critical Threshold Fiber Content for Freeze-Thaw Resistance in 3D-Printed Concrete
  8. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
    Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
    Small- to Medium-Scale Wall Experiments
  9. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
    Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
  10. Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
    Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
    Unleashing the Potential of Additive Manufacturing for Protective Structures
  11. Guillen Ruth, Naldoni Lapo, Quka Katerina, Gioia Flavio et al. (2025-06)
    Water Resistance of 3D Printed Clay with Bio-Stabilizers
  12. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  13. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
    Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
    Analytical Investigation and Numerical Modelling
  14. Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
    Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction
  15. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
  16. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-02)
    Permeability and Electrical Resistivity of 3D-Printed Mortars Using Local Materials (Zeolite, Calcined Clay, and Mussel Shell Powder):
    Aotearoa, New Zealand
  17. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
    Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
  18. Li Leo, Zhang Guang-Hu, Kwan Albert (2025-01)
    Exploring Submarine 3D Printing:
    Enhancing Washout-Resistance and Strength of 3D Printable Mortar
  19. Yaqub Walid, Aslani Farhad (2024-12)
    Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
  20. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Facade:
    Assessment of Air Permeability, Water Tightness, Wind Loads, and Impact Resistance
  21. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
    Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
  22. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Building Envelope:
    Assessment of Air-Permeability, Water-Tightness, Wind-Loads, and Impact-Resistance
  23. Bang Jin, Yim Hong (2024-10)
    Unbonded Inter-Layer Evaluation in Freshly 3D Printed Concrete Using Electrical Resistivity Measurements
  24. Mohemmi Morteza, Sadeghian Vahid, Panda Biranchi, Boyle Sheryl (2024-09)
    Numerical Modeling of Lateral Resistance of 3D Printed Concrete Walls
  25. Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-08)
    The Effect of Nano-Zinc-Oxide on Freeze-Thaw-Resistance of 3D Printed Geopolymer Mortars
  26. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
    Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
    Numerical Investigations
  27. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
    A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
  28. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
  29. Dong Wei, Wang Junfeng, Hang Meiyan, Qu Shuqiang (2024-01)
    Research on Printing Parameters and Salt-Frost-Resistance of 3D Printing Concrete with Ferrochrome-Slag and Aeolian Sand
  30. Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
    Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
  31. Wang Hao, Jiang Minghui, Hang Meiyan, Zhou Gangming et al. (2023-07)
    Research on the Mechanical Properties and Frost-Resistance of Aeolian Sand 3D Printed Mortar
  32. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Bajāre Diāna (2023-01)
    The Effects of 3D Printing on Frost-Resistance of Concrete
  33. Wang Li, Xiao Wei, Wang Qiao, Jiang Hailong et al. (2022-07)
    Freeze-Thaw-Resistance of 3D Printed Composites with Desert Sand
  34. Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
    Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests
  35. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2022-06)
    Salt-Scaling-Resistance of 3D Printed Concrete
  36. Liu Junli, Li Shuai, Fox Kate, Tran Jonathan (2021-12)
    3D Concrete Printing of Bio-Inspired Bouligand Structure:
    A Study on Impact-Resistance
  37. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-07)
    Fire-Resistance of 3D Printed Concrete Composite Wall Panels Exposed to Various Fire Scenarios
  38. Shen Wenkai, Yuan Qiang, Shi Caijun, Ji Youhong et al. (2021-07)
    Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology
  39. Li Zhijian, Wang Li, Ma Guowei (2019-02)
    Method for the Enhancement of Buildability and Bending-Resistance of Three-Dimensional-Printable Tailing Mortar
  40. Li Zhijian, Wang Li, Ma Guowei (2018-05)
    Method for the Enhancement of Buildability and Bending-Resistance of 3D Printable Tailing Mortar
  41. Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
    3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs