#strain¶
Keywords by Co - Occurrence¶
- Duan Yuhang, Liew Jia, Rabczuk Timon, Liew Kim (2026-04)
Frictional Contact Modeling Within a Local Strain-Based Peridynamic Framework for Impact-Induced Failure of 3D-Printed Concrete - Li Shiping, Sun Yan, Zhang Daxu, Chen Wujun et al. (2026-03)
Bio-Inspired Bouligand Architectures Enable Biaxial Toughening and Programmable Energy Dissipation in 3D-Printed Strain-Hardening Cementitious Composites - Katlav Metin, Turk Kazim (2026-03)
Explainable Hybrid Machine Learning Approach for Mechanical Performance of 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC) - Zhang Tong, Wei Jinhui, Chen Meng, Yu Kanghao (2026-02)
Experimental Characterization and Theoretical Modeling of the Bonding Behavior Between FRP Bars and 3D Printed Strain-Hardening Cementitious Composites - Sawicki Bartłomiej, Düking Peter, Placzek Gerrit, Masur Lukas et al. (2026-01)
Human-Robot Collaboration in Digital Fabrication with Concrete:
Quantifying Productivity and Psychophysiological Strain of Human Workers - Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design - Kalmykov Oleg, Demianenko Ivan, Potapov Sergei, Alataev Dzhmaldii (2025-12)
Strain Energy Density-Based Topology Optimization Using SIMP and Local Failure Criteria for 3D-Printed Concrete Structures - Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites - Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
Multi-Material 3D Concrete Printing:
Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites - Sun Yan, Mudasir Maryam (2025-09)
3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology - Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC) - Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
A Review of Recent Developments - Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC) - He Shan, Luković Mladena, Schlangen Erik (2025-04)
Self-Healing Strain-Hardening Concrete Cover - Du Guoqiang, Sun Yan, Qian Ye (2025-03)
In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures - Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing - Du Guoqiang, Qian Ye (2025-01)
Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures - Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate - Du Guoqiang, Qian Ye (2024-10)
Bio-Inspired 3D Printing of Strain-Hardening Cementitious Composites Reticulated Shell-Roofs - Du Guoqiang, Sun Yan, Qian Ye (2024-10)
Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) - Singh Pranay, Gadde Venkateswara, Zhou Chi, Okumus Pinar et al. (2024-09)
Development of 3D Printable Strain-Hardening Cementitious Composites for Bridge-Related Applications - Ivaniuk Egor, Mechtcherine Viktor (2024-09)
A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites - Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
A Numerical Study - Qian Shunzhi, Zhao Huanyu, Meng Dan (2024-09)
Numerical Study of Concrete Beams with 3D Printed Strain-Hardening Cementitious Composites (SHCC) - Du Guoqiang, Sun Yan, Qian Ye (2024-08)
3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider - Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete - Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites - Du Guoqiang, Qian Ye (2024-05)
Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites - Du Guoqiang, Sun Yan, Qian Ye (2024-03)
Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures - Qiu Minghong, Sun Yan, Qian Ye (2023-12)
Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete - Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
Case Study of a Spiral Staircase - Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites - Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam - Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-08)
3D Printable Strain-Hardening Cementitious Composites (3DP-SHCC):
Tailoring Fresh and Hardened State Properties - Xu Yading, Šavija Branko (2023-08)
3D Auxetic Cementitious-Polymeric Composite Structure with Compressive Strain-Hardening Behavior - Xu Nuoyan, Qian Ye (2023-04)
Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites - Jiang Fangming, Long Xiong, Tian Likang, Tan Yan et al. (2022-12)
Tensile Strain-Hardening Cementitious Composites and Its Practical Exploration Without Reinforcement:
A Review - Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction - Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites - Nedjar Boumediene, Awada Zeinab (2022-07)
Incremental Formulation of Early-Age Concrete in the Finite Strain Range for the Modelling of 3D Concrete Printing - Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2022-06)
Development of Cementitious Metamaterial with Compressive Strain-Hardening Characteristics - Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
Assessment of Critical Strain of Cement-Based Materials Containing VMA - Kruger Jacques, Mostert Jean-Pierre, Zijl Gideon (2022-06)
A Strain-Based Constitutive Model Ensuring Aesthetic 3D Printed Concrete Structures:
Limiting Differential Settlement of Filaments - Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System - Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern - Ivaniuk Egor, Eichenauer Martin, Tošić Zlata, Müller Steffen et al. (2022-05)
3D Printing and Assembling of Frame Modules Using Printable Strain-Hardening Cement-Based Composites - Ivaniuk Egor, Ivanova Irina, Sokolov Dmitrii, Tošić Zlata et al. (2022-02)
Application-Driven Material-Design of Printable Strain-Hardening Cementitious Composites - Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution - Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction - Nedjar Boumediene (2021-09)
Incremental Viscoelasticity at Finite Strains for the Modelling of 3D Concrete Printing - Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
Mechanical Behavior of Printed Strain-Hardening Cementitious Composites - Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites - Xu Yading, Šavija Branko (2019-06)
Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
Mechanical Properties - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
An Approach to Develop Printable Strain-Hardening Cementitious Composites - Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction - Yu Jing, Leung Christopher (2018-09)
Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC) - Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing - Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate