#plastic
Keywords by Co - Occurrence
- Azarhomayun Fazel, Alipanahi Pouya, Zeng Hang, Kim Heejeong et al. (2026-04)
Experimental and Numerical Investigation of Plastic Shrinkage Control in 3D-Printed Concrete Using Natural Zeolite
- Xia Kailun, Chen Yuning, Yu Qian, Zhang Yamei (2026-03)
Plastic Deformation Induced Non-Uniform Global Distribution of Microstructure and Related Performances Within 3D Printed Concrete
- Hinge Pawan, Bhagat Rajesh, Nandurkar Bhupesh, Pande Prashant et al. (2026-03)
Sustainable 3D-Printed Concrete:
Integrating E-Waste Plastics for Enhanced Printability, Mechanical Strength, and Long-Term Durability Sets
- Rehman Saif, Robens-Radermacher Annika, Unger Jörg, Wolfs Robert (2026-03)
Assessing Structural Failure in Extrusion-Based 3D Concrete Printing Using a Plasticity Model with Non-Linear Hardening
- Mandal Romio, Dubey Pawan, Arya Sampurna, Chakraborty Suman et al. (2026-02)
Recycled Plastic in 3D‐Printed Cementitious Concrete: Current Status and Research Gaps
- Deetman Arjen, Suiker Akke (2025-12)
Characterization of Early-Age Elastic–Plastic Properties of 3D Printed Materials Using Indentation Testing
- Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
- Chen Qinbin, Barbat Gabriel, Cervera Miguel (2025-06)
Finite Element Buildability Analysis of 3D Printed Concrete Including Failure by Elastic Buckling and Plastic Flow
- Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
Insights from Water Transport and Structural Evolution
- Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
- Yaqub Walid, Aslani Farhad (2024-12)
Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
- Markin Slava, Cordova Julian, Combrinck Riaan, Mechtcherine Viktor (2024-09)
Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage
- Romani Alessia, Levi Marinella (2024-09)
Large-Format Material-Extrusion Additive Manufacturing for Circular Economy Practices:
A Focus on Product-Applications with Materials from Recycled Plastics and Biomass-Waste
- Markin Slava, Mechtcherine Viktor (2024-09)
Mitigating Plastic Shrinkage and Cracking in 3D Printed Concrete Through Surface Rewetting
- Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
- Markin Slava, Combrinck Riaan, Mechtcherine Viktor (2024-07)
Specifics of Plastic Shrinkage in 3D Printed Concrete Elements
- Liu Qiong, Tang Huilin, Chen Kailun, Peng Bin et al. (2024-05)
Utilizing CO2 to Improve Plastic Shrinkage and Mechanical Properties of 3D Printed Mortar Made with Recycled Fine Aggregates
- Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
- Xia Kailun, Chen Yuning, Chen Yu, Jia Zijian et al. (2024-04)
Understanding and Modeling the Plastic Deformation of 3D Printed Concrete Based on Viscoelastic Creep Behavior
- Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
RESIN8
- Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
- Markin Slava, Mechtcherine Viktor (2023-10)
The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
- Oosthuizen Jandré, Babafemi Adewumi, Walls Richard (2023-10)
3D Printed Recycled Plastic Eco-Aggregate (Resin8) Concrete
- Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
- Han Xiaoyu, Yan Jiachuan, Chen Tiefeng, Tang Boyang et al. (2023-07)
Plastic Shrinkage of 3D Printed Concrete Under Different Self-Weight of Upper Layers
- Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-07)
Peridynamic Buildability-Analysis of 3D Printed Concrete Including Damage, Plastic Flow and Collapse
- Shahzad Qamar, Li Fangyuan (2023-05)
The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
A Novel Approach for Practical Applications
- Markin Slava, Mechtcherine Viktor (2023-03)
Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation
- Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
- Markin Slava, Mechtcherine Viktor (2023-01)
Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
- Clarke-Hicks James, Ochoa Isabel, Correa David (2022-12)
Harnessing Plastic Deformation in Porous 3D Printed Ceramic Light Screens
- Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
The State of Art
- Markin Slava, Mechtcherine Viktor (2022-06)
Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes
- Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
- Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
- Zhang Hanghua, Xiao Jianzhuang (2021-08)
Plastic Shrinkage and Cracking of 3D Printed Mortar with Recycled Sand
- Katzer Jacek, Skoratko Aneta (2021-03)
Concept of Using 3D Printing for Production of Concrete-Plastic Columns with Unconventional Cross-Sections
- Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
Plastic Shrinkage Cracking in 3D Printed Concrete
- Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
Elastic Buckling and Plastic Collapse During 3D Concrete Printing
- Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
- Jipa Mihail-Andrei, Bernhard Mathias, Dillenburger Benjamin (2017-11)
Submillimetre Formwork:
3D Printed Plastic Formwork for Concrete Elements