Opening Letter of RILEM TC QPA (2025-03)¶
10.21809/rilemtechlett.2024.209
,
Journal Article - RILEM Technical Letters, Vol. 9, pp. 127-133
Abstract
This Opening Letter outlines the objectives and scope of the newly developed RILEM Technical Committee QPA "Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques". The letter also provides quick overview of the current stateof- the-art on 3D concrete printing (3DCP) technology, and highlight key issues with regards to sustaining quality of the additive manufacturing process and the corresponding performance of the printed materials and structures. These are followed by discussion on prospect of developing and rationalising suitable non-destructive testing and evaluation methodologies to improve efficiency and quality of 3DCP through review of some previous studies. The letter also identifies potential achievements that can be obtained, and discusses key challenges and strategies in running the TC.
¶
26 References
- Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
A 3D Concrete Printing Prefabrication Platform for Bespoke Columns - Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete - Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
3D Printing Concrete with Reinforcement - Bos Derk, Wolfs Robert (2023-12)
A Quality-Control Framework for Digital Fabrication with Concrete - Breseghello Luca, Naboni Roberto (2022-05)
Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures - Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete - Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing - Falliano Devid, Crupi Giuseppe, Domenico Dario, Ricciardi Giuseppe et al. (2020-07)
Investigation on the Rheological Behavior of Lightweight Foamed Concrete for 3D Printing Applications - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
An Approach to Develop Printable Strain-Hardening Cementitious Composites - Helsel Michelle, Popovics John, Stynoski Peter, Kreiger Eric (2021-03)
Non-Destructive Testing to Characterize Inter-Layer Bonds of Idealized Concrete Additive Manufacturing Products - Khan Mohammad, Sanchez Florence, Zhou Hongyu (2020-04)
3D Printing of Concrete:
Beyond Horizons - Krause Martin, Otto Jens, Bulgakov Alexey, Sayfeddine Daher (2015-07)
Strategic Optimization of 3D Concrete Printing Using the Method of CONPrint3D® - Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP) - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
Integrating Reinforcement in Digital Fabrication with Concrete:
A Review and Classification Framework - Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
Plastic Shrinkage Cracking in 3D Printed Concrete - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction - Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
Biomimicry for 3D Concrete Printing:
A Review and Perspective - Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials - Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers - Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2019-08)
Mechanical Characterization of 3D Printable Concrete - Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete - Ting Guan, Tay Yi, Tan Ming (2021-04)
Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing - Wolfs Robert, Bos Freek, Salet Theo (2018-06)
Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete - Wolfs Robert, Bos Freek, Salet Theo (2019-03)
Hardened Properties of 3D Printed Concrete:
The Influence of Process Parameters on Inter-Layer Adhesion
0 Citations
BibTeX
@article{chai_shio.2024.OLoRTQ,
author = "Hwa Kian Chai and Tomoki Shiotani",
title = "Opening Letter of RILEM TC QPA: Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques",
doi = "10.21809/rilemtechlett.2024.209",
year = "2024",
journal = "RILEM Technical Letters",
volume = "9",
pages = "127--133",
}
Formatted Citation
H. K. Chai and T. Shiotani, “Opening Letter of RILEM TC QPA: Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques”, RILEM Technical Letters, vol. 9, pp. 127–133, 2024, doi: 10.21809/rilemtechlett.2024.209.
Chai, Hwa Kian, and Tomoki Shiotani. “Opening Letter of RILEM TC QPA: Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques”. RILEM Technical Letters 9 (2024): 127–33. https://doi.org/10.21809/rilemtechlett.2024.209.