Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures (2024-07)¶

3D printing in the construction sector is a promising, sustainable approach with the potential to build energy-efficient buildings. However, there is a lack of studies on the thermal properties of 3D-printed structures, which are fundamental to their energy efficiency. This study investigates the impact of printing parameters on thermal conductivity and defect development in 3D-printed concrete structures. Heat flow meter, scanning electron microscope and infrared imaging techniques were employed to assess the thermal properties and microstructure of 3D-printed samples. The results demonstrate that printing parameters significantly influence the porosity, void formation, and microstructural characteristics of 3D-printed concrete, ultimately affecting thermal properties. An increase in extrusion rate leads to higher thermal conductivity, whereas an increase in speed and standoff distance reduces thermal conductivity. Excessive spacing between printed lines can induce voids and gaps, contributing to lower thermal conductivity, while minimal spacing can promote higher porosity and larger pores. Infrared imaging revealed nonuniform thermal distribution in 3D-printed structures caused by the layered structure and voids in interlayer gaps. This study provides valuable insights for designing and constructing energy-efficient 3D-printed buildings, contributing to the development of sustainable building practices and the advancement of additive manufacturing in construction.