Skip to content

#permanent

Keywords by Co - Occurrence

  1. Ding Shengxuan, Li Jiren, Wang Mingqiang (2026-02)
    Mechanical Performance and Life-Cycle Carbon Reduction Benefits of 3D-Printed Permanent-Formwork Columns Filled with Low-Magnesia Concrete
  2. Wang Huai, Xu Jingjie, Gong Hao, Wang Peijun et al. (2026-01)
    Behavior of Hollow Glass Microsphere Aggregate Concrete Composite Short Columns with 3D-Printed Permanent Formwork Under Axial Load
  3. Cong Long-Yu, Zhang Fang, Qian Yong-Jiu (2025-12)
    Flexural Behavior Investigation of RC Beams with FRP-Reinforced 3D-Printed ECC Permanent Formwork
  4. Biswas Rajib, Saito Takahiro, Ito Atsushi (2025-11)
    Experimental Evaluation of a Novel 3D-Printed Permanent Concrete Formwork
  5. Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
    Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
  6. Reznik Petro, Volodymyrov Anton, Tenesesku Vladyslav, Firsov Pavlo (2025-10)
    Numerical Analysis of 3D-Printed Permanent Formwork in Multi-Story Building Construction
  7. Shiotani Tomoki, Asaue Hisafumi, Ogura Hiroki, Okude Nobuhiro et al. (2025-07)
    Evaluation of Permanent 3D Printed Formwork of a Bridge Pier Using Non-Destructive Testing Methods
  8. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
    Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
    Experimental and Analytical Investigations
  9. Yamamoto Yujin, Kinomura Koji, Murata Satoshi, Asaue Hisafumi et al. (2025-05)
    Seismic Performance of RC Column Surrounded by 3D Printed Concrete Permanent Formwork with Short Fiber
  10. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
    Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
    Mechanical Properties, Interlayer Interface and Durability
  11. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
    Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
  12. Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
    Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
  13. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
  14. Sabra Tarek, Ohno Motohiro, Kurihara Ryota, Kinomura Koji et al. (2024-11)
    Analytical Investigation on the Structural Performance of RC Column with 3D Printed Concrete Permanent Formwork
  15. Liu Bing, Guo Yazhao, Wang Yang, Liu Qizhou et al. (2024-11)
    Study on the Compression Performance of 3D Printing Concrete Permanent Formwork Composite Columns
  16. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
    Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
  17. Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
    An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
  18. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
    Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
  19. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
  20. Raza Saim, Triantafyllidis Zafiris, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-01)
    Seismic Performance of Fe-SMA Pre-Stressed Segmental Bridge Columns with 3D Printed Permanent Concrete Formwork
  21. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
    3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
  22. Zhang Dan, Ma Guowei, Guan Jingyuan, Wang Li et al. (2023-06)
    Cyclic Behavior of Unbonded Post-Tensioned Pre-Cast Segmental Concrete Columns Fabricated by 3D Printed Concrete Permanent Formwork
  23. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
    3D Printed Concrete Permanent Formwork:
    Effect of Post-Cast Concrete Proportion on Interface Bonding
  24. Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
    3D Printed Concrete with Coarse Aggregates:
    Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
  25. Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
    Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
  26. Wang Li, Yang Yu, Yao Liang, Ma Guowei (2022-02)
    Interfacial Bonding Properties of 3D Printed Permanent Formwork with the Post-Casted Concrete
  27. Zhu Binrong, Nematollahi Behzad, Pan Jinlong, Zhang Yang et al. (2021-04)
    3D Concrete Printing of Permanent Formwork for Concrete Column Construction