Skip to content

#orientation

Keywords by Co - Occurrence

  1. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
    Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
  2. Sahu Akshay, Panda Biranchi (2025-11)
    An Additive Manufacturing-Oriented Design Approach for Digital Construction
  3. Bakr Somahi, Cruz Marcos, Mayor-Luque Ricardo (2025-10)
    Cura Salad:
    Robotic Heated Spatial 3D Printing of Salt-Clay Composites for Health-Oriented Vernacular Architecture
  4. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
  5. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  6. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
    The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
  7. Tarhan Yeşim, Şahin Remzi (2024-12)
    The Impact of Air-Entraining on Frost-Endurance in 3D Printed Concrete:
    The Function of Printing Orientation and Curing Process
  8. Placzek Gerrit, Schwerdtner Patrick (2024-10)
    A Global Snapshot of 3D Printed Buildings:
    Uncovering Robotic-Oriented Fabrication-Strategies
  9. Chen Baixi, Qian Xiaoping (2024-09)
    Data-Driven Reliability-Oriented Buildability-Analysis of 3D Concrete Printed Curved Wall
  10. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
  11. Nefs Karsten, Sloots Joes, Kroon Kim, Bos Freek et al. (2024-05)
    Analytical Modeling of the Orientation-Dependency of 3D Printed SHCC at Increasing Levels of Scale
  12. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
    Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
    Meso-Scale Finite-Element-Analysis
  13. Nefs Karsten, Kroon Kim, Sloots Joes, Bos Freek et al. (2024-03)
    Orientation-Dependency of 3D Printed SHCC at Increasing Length Scale
  14. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
    Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
  15. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
  16. Dörrie Robin, Freund Niklas, Herrmann Eric, Baghdadi Abtin et al. (2023-09)
    Automated Force-Flow-Oriented Reinforcement Integration for Shotcrete 3D Printing
  17. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  18. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
    Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
  19. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
    Computational Modeling of Fiber Orientation During 3D Concrete Printing
  20. Daadouch Koussay, Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
    Computational Modeling of Fiber Orientation During 3D Concrete Printing
  21. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
    A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
  22. Yang Weiyi, Huang Zili, Verma Rupesh, Nguyen Giang et al. (2023-01)
    Effect of Layer-Orientation on Behavior of 3D Printed Rock Specimens in Indirect Tensile Testing
  23. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
    Earth-Based Additive Manufacturing:
    A Field-Oriented Methodology for Evaluating Material-Printability
  24. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
    Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
  25. Gantner Stefan, Rennen Philipp, Rothe Tom, Hühne Christian et al. (2022-06)
    Core Winding:
    Force-Flow-Oriented Fiber-Reinforcement in Additive Manufacturing with Concrete
  26. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2022-05)
    Fiber-Orientation Modeling During Extrusion-Based 3D Concrete Printing
  27. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
    Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
  28. Min Kyung-Sung, Park Kwang-Min, Lee Bong-Chun, Roh Young-Sook (2021-12)
    Chloride Diffusion by Build Orientation of Cementitious Material-Based Binder-Jetting 3D Printing Mortar
  29. Stidwell Samuel, Kreiger Eric (2021-12)
    Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
  30. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
    Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
  31. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2021-08)
    New Calculation Approach for Selecting and Orienting the Reinforcing Material for Robotic Concrete Manufacturing
  32. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
    Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
  33. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
    Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
  34. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
    An Investigation into the Effects of Deposition-Orientation of Material on the Mechanical Behavior of the Cementitious Powder and Gypsum-Powder in Inkjet 3D Printing
  35. Lauff Philipp, Fischer Oliver (2019-04)
    Efficient Ultra-High Performance Concrete with Innovative Trajectory-Oriented "Reinforcement"
  36. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
    Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology