Skip to content

#grade

Keywords by Co - Occurrence

  1. Marco Giancarlo, Lombardi Davide (2025-10)
    A Streamlined Decentralised Workflow for Obtaining Specific Mechanical Performance and Grade of 3DPC:
    Towards the Standardisation and Industrialisation of 3DCP
  2. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
    Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
  3. Sun Hou-Qi, Zeng Jun-Jie, Zhuge Yan, Liu Yue (2025-06)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Tests
  4. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
    Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
    Utilizing Fibers and Recycled Aggregates as Gradient Components
  5. Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
    Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations
  6. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
  7. Sun Hou-Qi, Zeng Jun-Jie, Hong Guang-Yao, Zhuge Yan et al. (2025-01)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Behavior
  8. Alarrak Rashed, Brand Alexander (2024-12)
    Mechanical Performance of Extruded Functionally-Graded Fiber-Reinforced Mortar with Targeted Fiber-Injection
  9. Teng Teng, Zhi Yefan, Akbarzadeh Masoud (2024-11)
    Gradient Multimaterial Printing:
    Integrated and Tailored Thermal Insulation Through Gradient Multimaterial Additive Manufacturing for Masonry Architectural Components
  10. Ding Yahong, Tong Jiaqi, Zhang Meixiang, Guo Shuqi et al. (2024-11)
    Effect of Aggregate Gradation on the Properties of 3D Printed Recycled Coarse Aggregate Concrete
  11. Mandala Venugopal, Khan Mohd (2024-11)
    Experimental Investigations on Layered Functionally Graded Fiber-Reinforced Concrete
  12. Haufe Carl, Castel Paula, Strahm Benedikt, Nigl David et al. (2024-09)
    A Digital Design Process for Bundling of Void Formers for Application in Functionally Graded Concrete
  13. Herding Friedrich, Lowke Dirk (2024-09)
    Improving the Dimensional Accuracy in Selective Cement-Activation by w/c-Ratio Gradation
  14. Goidea Ana, Popescu Mariana, Johansson Anton, Andreén David (2024-07)
    Algorithmic Modeling of Functionally Graded Metamaterials in 3D Printed Building Envelopes
  15. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
  16. Kim Il (2024-04)
    Density Gradient Concrete Fabrication with Injection 3D Gypsum Printing
  17. Zhang Hongping, Duan Shuni, Han Qi, He Qiangqiang et al. (2024-03)
    Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate-Gradation-Optimization
  18. Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan, Sebastian Shilpa (2024-02)
    Effect of Sand-Gradations on the Fresh Properties of 3D Printable Concrete
  19. Vargas José (2023-12)
    Spatially Graded Modeling:
    An Integrated Workflow For 3D Concrete Printing
  20. Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
    Coextrusion of Clay-Based Composites:
    Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
  21. Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
    Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
    The Role of SAC on the Rheology and Phase Evolution of 3DPC
  22. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
    Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
  23. Nadoury Wegdan, Mohamed Ashraf (2023-08)
    Modelling the Temperature Gradient in 3D Concrete Printing
  24. Sobek Werner, Schmeer Daniel (2023-05)
    Graded Concrete (2. Generation):
    The Combination of Hollow-Core Construction with Trajectory-Based Reinforcement
  25. Blagojevic Boris, Sawodny Oliver (2023-04)
    Path-Planning for Graded Concrete Element Fabrication
  26. Chen Wei-Ting, Sunny Anthraper Liya, Skevaki Eleni, Reiter Lex et al. (2023-03)
    Imprinting Concrete Graded Transparency in 3D Concrete Printing Walls
  27. Dahlenburg Maximilian, Hechtl Christian, Matthäus Carla, Fottner Johannes (2022-11)
    3D Concrete Printing:
    Graded Concrete-Extrusion
  28. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
    Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
    An Experimental Approach
  29. Sitnikov Vasily, Kitani Lena, Maneka Artemis, Lloret-Fritschi Ena et al. (2022-06)
    Design and Fabrication of Spatially Graded Concrete Elements with Ice Aggregate Method
  30. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
    Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
  31. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
    Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
  32. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
    3D Printed Concrete with Recycled Glass:
    Effect of Glass Gradation on Flexural Strength and Microstructure
  33. Craveiro Flávio, Bártolo Helena, Duarte José, Bartolo Paulo (2020-10)
    A Multi-Material Extrusion-Nozzle for Functionally-Graded Concrete Printing
  34. Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
    Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing
  35. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
    Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
  36. Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
    An Automated System for 3D Printing Functionally Graded Concrete-Based Materials
  37. Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
    Functionally Graded Concrete:
    Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements
  38. Ahmed Zeeshan, Bos Freek, Brunschot Maikel, Salet Theo (2020-02)
    On-Demand Additive Manufacturing of Functionally Graded Concrete
  39. Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
    Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing
  40. Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
    A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing
  41. Wörner Mark, Schmeer Daniel, Schuler Benjamin, Pfinder Julian et al. (2016-12)
    The Technology of Graded Concrete:
    From the Development of Concrete Mixtures and the Conceptual Design to the Automatized Manufacturing
  42. Duballet Romain, Gosselin Clément, Roux Philippe (2015-10)
    Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene-Aggregate Concrete Structures
  43. Herrmann Michael, Sobek Werner (2015-10)
    Functionally Graded Concrete:
    Numerical Design Methods and Experimental Studies on Mass Minimized Components