Early-Age Creep of 3D Printable Mortar (2023-02)¶

Experiments and Analytical Modelling

10.1016/j.cemconcomp.2023.104973

Chang Ze, Liang Minfei, Xu Yading, Wan Zhi, Schlangen Erik, Šavija Branko
Journal Article - Cement and Concrete Composites

Abstract

In this study, an experimental setup to characterize the early-age creep of 3D printable mortar was proposed. The testing protocol comprises quasi-static compressive loading-unloading cycles, with 180-s holding periods in between. An analytical model based on a double power law was used to predict creep compliance with hardening time and loading duration as inputs. Subsequently, this analytical model was validated by comparison to uniaxial compression tests in which loading is increased incrementally, i.e., in steps, showing a good quantitative agreement. Minor differences between the two results were noted, most notably at the beginning of the test. This is because the determination of creep compliance for 3D printable mortar at fresh stage depends on the load level. In the end, the volumetric strain of tested samples from uniaxial compressive test is used to explain why the compressive loading affects the creep deformation.

¶

29 References

11 Citations

BibTeX

@article{chan_lian_xu_wan.2023.EACo3PM,
  author            = "Ze Chang and Minfei Liang and Yading Xu and Zhi Wan and Erik Schlangen and Branko Šavija",
  title             = "Early-Age Creep of 3D Printable Mortar: Experiments and Analytical Modelling",
  doi               = "10.1016/j.cemconcomp.2023.104973",
  year              = "2023",
  journal           = "Cement and Concrete Composites",
}

Formatted Citation

IEEE

Z. Chang, M. Liang, Y. Xu, Z. Wan, E. Schlangen and B. Šavija, “Early-Age Creep of 3D Printable Mortar: Experiments and Analytical Modelling”, Cement and Concrete Composites, 2023, doi: 10.1016/j.cemconcomp.2023.104973.

CMOS

Chang, Ze, Minfei Liang, Yading Xu, Zhi Wan, Erik Schlangen, and Branko Šavija. “Early-Age Creep of 3D Printable Mortar: Experiments and Analytical Modelling”. Cement and Concrete Composites, 2023. https://doi.org/10.1016/j.cemconcomp.2023.104973.