Skip to content

#ratio

Keywords by Co - Occurrence

  1. Khalil Jawad, Fakih Amin, Yaseen Zaher, Osta Mohammed et al. (2026-02)
    Influence of Chemical Components and Molar Ratios on Strength Development of One-Part Alkali-Activated Mortar: Ensemble Machine Learning Models
  2. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
    Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
  3. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
    Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
    Effects of Low Water-Binder Ratios on Workability and Strength
  4. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
    Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
    Printability, Mechanics, and Shrinkage
  5. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
  6. Mani Aravindhraj, Sekar Muthu (2025-11)
    Extrudability in 3D Printing:
    A Comprehensive Approach to S/C, W/C Ratios and Superplasticizer Content
  7. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
  8. Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
    Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
  9. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
    Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
  10. Liu Nana, Wang Jie (2025-07)
    Experimental Study on the Effect of Water-Binder Ratio on 3D Printing Form of Concrete Mortar
  11. Kontovourkis Odysseas, Georgiou Christos, Andreou Alexis, Andreou Vasilis et al. (2025-06)
    Measuring and Evaluating Layer Height to Width Ratio in 3DCP Towards Higher Geometric Conformity
  12. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
    Insights into Mix Ratios, Testing Procedures, and Material Behaviour
  13. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
    Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
  14. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  15. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
    High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
    Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
  16. Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
    Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures
  17. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
    Inter-Layer Cohesion in 3D Printed Concrete:
    The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
  18. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  19. Herding Friedrich, Lowke Dirk (2024-09)
    Improving the Dimensional Accuracy in Selective Cement-Activation by w/c-Ratio Gradation
  20. Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
    The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete
  21. Şahin Hatice, Akgümüş Fatih, Mardani Ali (2024-08)
    Mechanical and Rheological Properties of Fiber‐Reinforced 3D Printable Concrete in Terms of Fiber Content and Aspect Ratio
  22. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
    Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
  23. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
    Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
    Characteristics and Influences of Superplasticizer and Water-Binder Ratio
  24. Zhao Guoqi, Fan Yichang, Tang Can, Wei Yuanyuan et al. (2024-02)
    Preparation and Compressive Properties of Cementitious Composites Reinforced by 3D Printed Cellular Structures with a Negative Poisson's Ratio
  25. Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
    The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios
  26. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
    On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
  27. Xu Nuoyan, Qian Ye (2023-04)
    Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
  28. Kruger Jacques, Westhuizen Jean-Pierré (2023-03)
    Investigating the Poisson Ratio of 3D Printed Concrete
  29. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
    Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization