Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage (2024-09)¶
10.1016/j.conbuildmat.2024.138073
, Cordova Julian, ,
Journal Article - Construction and Building Materials, Vol. 449, No. 138073
Abstract
This study investigates the shrinkage-induced deformation behaviour of 3D-printed concrete, which exhibits unique characteristics compared to traditionally cast concrete. Through a comprehensive analysis, the onset, direction, and magnitude of deformations in 3D-printed elements are analyzed. Leveraging extensive experimental data, both analytical and numerical models were developed to predict these deformations accurately. Developed models demonstrate strong alignment with experimental results, particularly in the case of a 3D-printed concrete wall. The findings provide valuable insights and tools for advancing the understanding and application of 3D-printed concrete in construction.
¶
15 References
- Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete - Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete - Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements - Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
Development of a 3D Printer for Concrete Structures:
Laboratory Testing of Cementitious Materials - Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
Evolution of Capillary Pressure in 3D Printed Concrete Elements:
Numerical Modelling and Experimental Validation - Markin Slava, Mechtcherine Viktor (2022-06)
Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes - Markin Slava, Mechtcherine Viktor (2023-03)
Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation - Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
Large-Scale Digital Concrete Construction:
CONPrint3D Concept for On-Site, Monolithic 3D Printing - Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
Plastic Shrinkage Cracking in 3D Printed Concrete - Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures - Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete - Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
Inter-Layer Adhesion of 3D Printed Concrete:
Influence of Layer Stacked Vertically
3 Citations
- Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation - Gribonval Alice, Pierre Maxime, Ducoulombier Nicolas, Sab Karam et al. (2025-05)
Multi-Physics Modelling of 3D-Printed Concrete Evolution in Environmental Conditions - Aman Abdulkerim, Yang Zhe, Xin Yubo, Zhang Xiaoman et al. (2025-04)
Introducing Magnesium Oxide into 3D Printed Concrete to Mitigate Dry-Shrinkage
BibTeX
@article{mark_cord_comb_mech.2024.DBo3PCEIbPS,
author = "Slava Viacheslav Markin and Julian A. L. Cordova and Riaan Combrinck and Viktor Mechtcherine",
title = "Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage",
doi = "10.1016/j.conbuildmat.2024.138073",
year = "2024",
journal = "Construction and Building Materials",
volume = "449",
pages = "138073",
}
Formatted Citation
S. V. Markin, J. A. L. Cordova, R. Combrinck and V. Mechtcherine, “Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage”, Construction and Building Materials, vol. 449, p. 138073, 2024, doi: 10.1016/j.conbuildmat.2024.138073.
Markin, Slava Viacheslav, Julian A. L. Cordova, Riaan Combrinck, and Viktor Mechtcherine. “Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage”. Construction and Building Materials 449 (2024): 138073. https://doi.org/10.1016/j.conbuildmat.2024.138073.