Carbon Sequestration with 3D Concrete Printing (2024-07)¶
, , , ,
Contribution - Construction 3D Printing, pp. 57-66
Abstract
The construction industry's role in reducing its considerable carbon footprint is pivotal. Recent advancements in 3D concrete printing (3DCP) and carbon sequestration technologies for cement-based materials (CBM) have presented immense potential for sustainable construction operations. Nevertheless, decarbonization of the construction sector remains an ongoing challenge. Although the integration of carbon sequestration technologies with 3DCP provides an avenue for further progress, there exist numerous concerns that need to be thoroughly evaluated and addressed. This review article discusses the state-of-the-art techniques of 3DCP for a sustainable built environment, the fundamentals of carbon utilization and sequestration with CBM, as well as the possibility of integrating both technologies to facilitate net-zero emissions by 2050.
¶
13 References
- Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
3D Printable Alkali-Activated Concretes for Building Applications:
A Critical Review - Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
Sustainable Materials for 3D Concrete Printing - Cruz Gil, Dizon John, Farzadnia Nima, Zhou Hongyu et al. (2023-04)
Performance, Applications, and Sustainability of 3D Printed Cement and Other Geomaterials - Douba AlaEddin, Badjatya Palash, Kawashima Shiho (2022-03)
Enhancing Carbonation and Strength of MgO Cement Through 3D Printing - Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars - Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
3D Concrete Printing Sustainability:
A Comparative Life Cycle Assessment of Four Construction Method Scenarios - Muñoz Ivan, Madrid Javier, Muñiz Manuel, Uhart Maylis et al. (2021-01)
Life Cycle Assessment of Integrated Additive-Subtractive Concrete 3D Printing - Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Peng Yiming, Unluer Cise (2022-12)
Development of Alternative Cementitious Binders for 3D Printing Applications:
A Critical Review of Progress, Advantages and Challenges - Sun Bochao, Zeng Qiang, Wang Dianchao, Zhao Weijian (2022-10)
Sustainable 3D Printed Mortar with CO2 Pretreated Recycled Fine Aggregates - Wang Dianchao, Xiao Jianzhuang, Sun Bochao, Zhang Shipeng et al. (2023-02)
Mechanical Properties of 3D Printed Mortar Cured by CO2 - Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
3 Citations
- Lim Sean, Lee Junghyun, Bawarith Nuran, Paul Suvash et al. (2025-11)
The Efficacy of Self-Curing Agents on Enhanced Internal Curing and Accelerated Carbonation with CO2-Steam Integrated 3D Concrete Printing - Lim Sean, Tan Ming (2024-10)
A Rheological Model for Concrete Additive Manufacturing - Lim Sean, Tay Yi, Paul Suvash, Lee Junghyun et al. (2024-09)
Carbon Capture and Sequestration with In-Situ CO2 and Steam Integrated 3D Concrete Printing
BibTeX
@inproceedings{lim_tay_amr_fadh.2024.CSw3CP,
author = "Sean Gip Lim and Yi Wei Daniel Tay and Issam T. Amr and Bandar A. Fadhel and Ming Jen Tan",
title = "Carbon Sequestration with 3D Concrete Printing: Potentials and Challenges",
doi = "10.1007/978-3-031-64269-2_8",
year = "2024",
pages = "57--66",
booktitle = "Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference",
editor = "Ming Jen Tan and Mingyang Li and Yi Wei Daniel Tay and Teck Neng Wong and Paulo Jorge Bartolo",
}
Formatted Citation
S. G. Lim, Y. W. D. Tay, I. T. Amr, B. A. Fadhel and M. J. Tan, “Carbon Sequestration with 3D Concrete Printing: Potentials and Challenges”, in Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference, 2024, pp. 57–66. doi: 10.1007/978-3-031-64269-2_8.
Lim, Sean Gip, Yi Wei Daniel Tay, Issam T. Amr, Bandar A. Fadhel, and Ming Jen Tan. “Carbon Sequestration with 3D Concrete Printing: Potentials and Challenges”. In Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference, edited by Ming Jen Tan, Mingyang Li, Yi Wei Daniel Tay, Teck Neng Wong, and Paulo Jorge Bartolo, 57–66, 2024. https://doi.org/10.1007/978-3-031-64269-2_8.