Skip to content

#load

Keywords by Co - Occurrence

  1. Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
    Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
  2. Pal Biswajit, Chourasia Ajay, Tomar Milan, Pradeep Kumar (2026-01)
    Influence of Interfilament Bond Characteristics on the Load–Deflection Behavior of 3D Printed Beam:
    A Numerical Study
  3. Pfleger Marc-Patrick, Radl Elisabeth, Sam Nina, Vill Markus (2025-10)
    3D Concrete Printing of Thin-Walled Load-Bearing Reinforced Structures
  4. Giulivo Marco, Capozzi Vittorio, Menna Costantino (2025-10)
    Experimental and Analytical Assessment of the in-Plane Behaviour of 3D Printed Concrete Walls Subjected to Cyclic Loads
  5. Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
    Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
  6. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
    Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
    Effect of Cold Joint, Axial Load and Load Type
  7. Šána Vladimír, Litoš Jiří (2025-07)
    Load-Bearing Capacity of the 3D Printed Concrete Structure Based on a Static Assessment and Load Test in Scale 1:1
  8. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
  9. Liu Shun, Yang Xiaobin, Wu Jianing (2025-06)
    Damage Evolution Analysis of Cement-Based 3D Printing Similar Materials Under Different Cyclic Loading-Unloading Conditions
  10. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-06)
    Assessment of Post-Tension Capacity in Novel 3D-Printed Topology:
    Optimized Formwork via Load Transfer Testing
  11. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
    Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
    A 3D Printed On-Site Load-Bearing Structure
  12. Raza Saim, Sakha Mahsa, Hassan Zohaib, Manshadi Behzad et al. (2025-05)
    Flexural Behavior of Stay-in-Place Load-Bearing 3D-Printed Concrete Formwork for Ribbed Slabs
  13. Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
    Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
  14. Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
    Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
  15. Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
    Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
    Description, Application and Validation
  16. Mohammed Arafat, Tamimi Adil, Abdwais Ahmed (2024-12)
    Structural Performance of 3D Concrete Printed Load-Bearing Walls
  17. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
    Design of 3D Printed Concrete Masonry for Wall Structures:
    Mechanical Behavior and Strength Calculation Methods Under Various Loads
  18. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
  19. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Facade:
    Assessment of Air Permeability, Water Tightness, Wind Loads, and Impact Resistance
  20. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Building Envelope:
    Assessment of Air-Permeability, Water-Tightness, Wind-Loads, and Impact-Resistance
  21. Shahzad Qamar, Li Fangyuan (2024-11)
    Assessing the Load-Bearing Capacity of 3D Printed Concrete at Early-Ages:
    An Innovative Approach
  22. Raza Saim, Manshadi Behzad, Sakha Mahsa, Widmann Robert et al. (2024-10)
    Load Transfer Behavior of 3D Printed Concrete Formwork for Ribbed Slabs Under Eccentric Axial Loads
  23. Giulivo Marco, Menna Costantino, Capozzi Vittorio, Asprone Domenico (2024-09)
    Experimental Behavior of a 3D Printed Concrete Wall with Fixed Base Anchorage Subjected to In-Plane Cyclic Loads
  24. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
    Instrumentation of the Extruder Nozzle Using Load Cells:
    Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
  25. Baz Bilal, Nana W., Mothe Loïc, Florentin Jérôme et al. (2024-09)
    Structural Behavior of 3D Printed Load Bearing Elements
  26. Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Jongvisuttisun Passarin et al. (2024-09)
    Uniaxial Compression on 3D Printed Load-Bearing Walls with Openings
  27. Shahzad Qamar, Li Fangyuan (2024-08)
    Assessment of Load-Bearing Capacity and Buildability Failures in 3D Printed Concrete Structures
  28. Yao Yiming, Bu Dechao, Yu Jiamian, Shao Lijing et al. (2024-08)
    Flexural Behavior of Textile Reinforced 3D Printed Concrete Under Quasi-Static and Dynamic Impact Loads
  29. Giwa Ilerioluwa, Kazemian Ali, Gopu Vijaya, Rupnow Tyson (2024-07)
    A Compressive Load-Bearing-Analysis of 3D Printed Circular Elements
  30. Mütevelli Özkan İffet, Aldemir Alper (2024-07)
    Machine-Learning Networks to Predict the Ultimate Axial Load and Displacement Capacity of 3D Printed Concrete Walls with Different Section Geometries
  31. Du Guoqiang, Qian Ye (2024-05)
    Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites
  32. Bayatkashkooli Samira, Amirsardari Anita, Rajeev Pathmanathan, Sanjayan Jay et al. (2024-05)
    Investigation of Axial Load Capacity of 3D Printed Concrete Wall
  33. Pfleger Marc-Patrick, Radl Elisabeth, Esebali Osman, Vill Markus (2024-04)
    Load Bearing Behavior of 3D Printed Pre-Stressed Segmental Concrete Girders
  34. Silveira Marcos, Wagner Juliana, Khanverdi Mohsen, Das Sreekanta (2024-02)
    Structural Performance of Large-Scale 3D Printed Walls Subjected to Axial Compression Load
  35. Delavar Mohammad, Chen H., Sideris Petros (2024-01)
    Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading
  36. Westerlind Helena, Vargas José, Silfwerbrand Johan (2024-01)
    Towards the Application of Mesostructures in 3D Concrete Printing:
    Evaluating Load-bearing Performance
  37. Coward Andy, Sørensen Jesper (2023-12)
    3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
    The Minimass Beam
  38. Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
    Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
  39. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
  40. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
    Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
  41. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-05)
    Wet Joint Performance of 3D Printed Concrete Beam Segments Under Flexural Loading
  42. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2022-12)
    3D Cement Printing:
    DFMA Guideline of Patterned Load-Bearing Walls for Small Residential Units
  43. Lin Alexander, Goel Abhimanyu, Wong De, Yeo Charlene et al. (2022-07)
    Compressive Load-Dominated Concrete Structures for Customized 3D Printing Fabrication
  44. Delavar Mohammad, Chen Hao, Sideris Petros (2022-07)
    Design of 3D Printed Concrete Walls Under In-Plane Seismic Loading
  45. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu, Thiruvenkatamani G. (2022-06)
    Mechanical Properties and Failure-Pattern of 3D Printed Hollow Cylinders and Wall Segments under Uniaxial Loading
  46. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
    Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
    Assessment of Critical Strain of Cement-Based Materials Containing VMA
  47. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
    A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
  48. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
    Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
  49. Singh Amardeep, Liu Qiong, Xiao Jianzhuang, Lyu Qifeng (2022-02)
    Mechanical and Macrostructural Properties of 3D Printed Concrete Dosed with Steel-Fibers under Different Loading-Direction
  50. Yang Yekai, Wu Chengqing, Liu Zhongxian, Zhang Hai (2021-12)
    3D Printing Ultra-High-Performance Fiber-Reinforced Concrete under Triaxial Confining Loads
  51. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2021-01)
    Uniaxial Load Testing of Large-Scale 3D Printed Concrete Wall and Finite-Element-Model-Analysis
  52. Jiramarootapong Patiphat, Prasittisopin Lapyote, Snguanyat Chalermwut, Tanapornraweekit Ganchai et al. (2020-07)
    Load Carrying Capacity and Failure Mode of 3D Printing Mortar Wall Panel Under Axial Compression Loading
  53. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
    Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
  54. Xu Yading, Schlangen Erik, Šavija Branko (2020-07)
    Auxetic Behavior of Cementitious Cellular Composites under Uniaxial Compression and Cyclic Loading
  55. Heinlein Ulli, Fraundorfer Andreas, Katona Sebastian, Wimmer Matthias (2020-02)
    Manufacturing of Curved Load-Bearing Concrete Elements Using an Adaptive Formwork Tool
  56. Li Zhijian, Wang Li, Ma Guowei (2020-01)
    Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
  57. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
    Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
  58. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
    The Effect of Loading-Direction on the Compressive Behavior of a 3D Printed Cement-Based Material
  59. Burroughs Jedadiah, Johnson Carol, Chaar Ghassan, Banko Marion et al. (2018-04)
    Automated Construction with Concrete:
    Response of Wall- and Beam-Sections to Blast-Loads