Skip to content

#adaption

Keywords by Co - Occurrence

  1. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
    Adaptive-Binder-Aggregate Mixing (ABAM):
    Concept for Extrusion-Based Multi-Material 3D Concrete Printing
  2. Anastassiou Richard, Alvarado Rodrigo, Wegertseder Martínez Paulina (2025-11)
    Towards Climatomorphism:
    A Generative Optimization Framework for Climate-Adaptive 3D-Printed Free-Form Housing
  3. Özdemir Salih, Alaçam Sema (2025-11)
    Cognitive Ecosystem for Lifecycle-Adaptive and Sustainable 3D Concrete Printing
  4. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  5. Marco Giancarlo, Cheung Lok (2025-10)
    Real-Time Defect Detection, Analysis and Suggestion in Adaptive 3D Concrete Printing via Multimodal LLM Integration
  6. Kiński Wojciech, Siwicki Przemysław, Zieliński Jacek, Smater Michał (2025-10)
    Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete
  7. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-10)
    Adaptive Velocity Compensation for Optimal 3D Concrete Printing in Uncontrolled Environments
  8. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-09)
    From Qualitative Diagnosis to Adaptive Compensation for Filament Imperfections During On-Site Robotic 3D Printing
  9. Marco Giancarlo, Cheung Lok (2025-09)
    Multimodal Large Language Models for Adaptive 3D Concrete Printing:
    Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
  10. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
    A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
  11. Ozturk Onur, Lunsford Caleb, Strait James, Nair Sriramya (2025-08)
    Breaking Barriers in Underwater Construction:
    A Two-Stage 3D Printing System with On-Demand Material Adaptation
  12. Chen Baixi, Qian Xiaoping (2025-07)
    Explainable Data-Driven Analysis of Uncertainty Propagation in 3D Concrete Printing via Adaptive Polynomial Chaos Expansion
  13. Minde Pravin, Patil Jagruti (2025-03)
    A Comprehensive Review of Factors Affecting 3D Printing Technology Adaptation in the Indian Construction Sector
  14. Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
    Adaptive Robotic Tamping:
    A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
  15. He Chenming, Michalatos Panagiotis, Sabin Jenny (2024-11)
    GrowFill:
    Generative Adaptive Infill for Additive Manufacturing
  16. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
    Towards Adaptive Additive Manufacturing:
    Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
  17. Georgiou Christos, Kontovourkis Odysseas (2024-08)
    Robotic 3D Printing on Inclined Surfaces Using Adaptive Formwork Principles for Prefabricated Curve-Like Structures
  18. Gündüz Gamze, Özkar Mine (2024-02)
    A Process-Based Framework for Adaptable Modules in Robotic Clay 3D Printing
  19. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-11)
    Adaptive Estimation and Detection of Filament-Width-Deviation During 3D Robotic Printing of Construction Materials
  20. Çapunaman Özgüç, Iseman Emily, Gürsoy Benay (2023-07)
    Material in the Loop Fabrication:
    A Vision-Based Adaptive Clay 3D Printing Workflow on Indeterminate Sand Surfaces
  21. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
    Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
  22. Dörrie Robin, Laghi Vittoria, Arrè Lidiana, Kienbaum Gabriela et al. (2022-10)
    Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures
  23. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
  24. Lee Dongyoun, Hong Junho (2022-08)
    Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork
  25. Wan Qian, Wang Li, Ma Guowei (2022-07)
    Continuous and Adaptable Printing Path Based on Transfinite Mapping for 3D Concrete Printing
  26. Schmid Robert, Hansemann Georg, Autischer Michael, Juhart Joachim (2022-06)
    Adaptive Foam-Concrete in Digital Fabrication
  27. Jenny Ercan, Lloret-Fritschi Ena, Jenny David, Sounigo Eliott et al. (2022-06)
    Robotic Plaster Spraying:
    Crafting Surfaces with Adaptive Thin-Layer Printing
  28. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
    3D Printing of Cement-Based Materials with Adapted Buildability
  29. Breseghello Luca, Naboni Roberto (2021-07)
    Adaptive Tool-Path:
    Enhanced Design and Process-Control for Robotic 3DCP
  30. Besklubova Svetlana, Skibniewski Mirosław, Zhang Xueqing (2021-02)
    Factors Affecting 3D Printing Technology Adaptation in Construction
  31. Archez Julien, Texier-Mandoki N., Bourbon X., Caron Jean-François et al. (2020-08)
    Adaptation of the Geopolymer Composite Formulation Binder to the Shaping Process
  32. Wan Qian, Wang Li, Ma Guowei (2020-07)
    Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
  33. Heinlein Ulli, Fraundorfer Andreas, Katona Sebastian, Wimmer Matthias (2020-02)
    Manufacturing of Curved Load-Bearing Concrete Elements Using an Adaptive Formwork Tool
  34. Lim Jian, Weng Yiwei, Pham Quang-Cuong (2019-10)
    3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork
  35. Hack Norman, Lindemann Hendrik, Kloft Harald (2019-05)
    Adaptive Modular Spatial Structures for Shotcrete 3D Printing
  36. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2018-09)
    Adapting Smart Dynamic Casting to Thin-Folded Geometries
  37. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  38. Michel Matthias, Knaack Ulrich (2014-12)
    Fundamentals of Development for Adaptive Formwork for Free Formed Concrete Shells and Walls