3D-Printed Concrete Fracture (2025-05)¶

Unlike conventional concrete fractures, few models of 3D-printed concrete (3DPC) fractures have been reported; moreover, systematic validation across diverse tests, materials, and laboratories is lacking. This paper first reviews existing 3DPC fracture simulations against experiments, noting mixed performance in most cases. Additionally, current models often require excessive material parameters that can be difficult to measure and interpret, along with a scarcity of 3D modeling. To address these issues, the paper develops a robust 3D validation framework using the generalized/eXtended finite element method to simulate both interlayer bonds and intralayer fractures in 3DPC/cementitious materials. Four softening models were assessed by capturing linear and nonlinear fracture responses under tensile, bending, and shear tests. Different 3DPC mixtures (plain, fiber-reinforced, and limestone-calcined clay) from existing experimental studies across different laboratories were used for validation, showing good agreement with experimental load–displacement behavior. The influences of layer print interval and nozzle standoff distance from two separate tests were investigated, revealing that the bilinear cohesive model provided the most consistent predictions for plain and fiber-reinforced 3DPC under tension and bending. In contrast, the Park–Paulino–Roesler and Xu–Needleman cohesive models better captured fracture behavior for the limestone-calcined clay mix, while the linear cohesive model was most suitable for shear mode. A fracture in a topologically optimized 3DPC girder was also simulated, illustrating the method’s applicability to large-scale structural elements, the importance of the material mix, and highlighting a scenario where 2D approximations are inapplicable.