#fracture
Keywords by Co - Occurrence
- Nakase Kota, Zhou Yubao, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2025-11)
Acoustic Emission Monitoring of Fracture Behaviour of 3D Printed Concrete with Different Printing Paths
- Liu Renlong, Cheng Zhangqi (2025-10)
Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
Influencing Factors and Mechanisms
- Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
- Geng Shao-bo, Zhang Chen, Zhang Hui, Hai Lu et al. (2025-08)
Upcycling Coal Gangue Coarse Aggregates into 3D Printed Concrete:
Multi-Scale Mechanisms of Fracture Behaviour
- Ye Chengjie, Xu Jie, Lacidogna Giuseppe (2025-06)
Fracture Behavior of 3D Printed Geopolymer Concrete Containing Waste Ceramic
- Asaue Hisafumi, Shiotani Tomoki, Okude Nobuhiro, Ogura Hiroki et al. (2025-05)
Clarification of Fracture Behaviour of RC Pillar with 3D Concrete Printing Buried Formwork Based on Elastic Wave Technique
- Mukhtar Faisal (2025-05)
3D-Printed Concrete Fracture:
Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM
- Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
- Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
- Li Mo, Wu Yun-Chen, Wang Xinbo (2025-04)
Fracture Behavior of Additively Manufactured Cementitious Materials
- Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
- Du Guoqiang, Qian Ye (2025-01)
Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
- Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
- Du Guoqiang, Sun Yan, Qian Ye (2024-10)
Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
- Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
Fracture in 3D Printed Concrete Beams:
Deflection and Penetration of Impinging Cracks at Layer Interfaces
- Yoshihara Rei, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2024-09)
Development and Validation of Finite-Element-Constitutive-Model for Meso-Scale Compressive Fracture Behavior of 3D Printed Mortar
- Nakase Kota, Hashimoto Katsufumi, Sugiyama Kentaro, Mori Hiroaki et al. (2024-09)
Effect of Printing Parameters on Print Quality and Fracture Propagation Behavior of 3D Printed Concrete
- Liu Bing, Chen Yuwen, Li Dongdong, Wang Yang et al. (2024-09)
Study on the Fracture Behavior and Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete
- Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
- Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
- Du Guoqiang, Qian Ye (2024-05)
Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites
- Kompella Sriram, Marcucci Andrea, Monte Francesco, Levi Marinella et al. (2024-04)
Fracture Behavior of Three-Dimensional-Printable Cementitious Mortars in Very Early-Ages and Hardened States
- Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
- Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
- Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
Experimental and Numerical Studies
- Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
- Saravanan Pradeep, Ramaswamy Ananth (2023-09)
Numerical Investigation on Inter-Layer and Filament Fracture Behavior of 3D Printed Concrete
- Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
- Thakur Manideep, Kulkarni Omkar, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
Influence of Cold Joint on Fracture Behavior of 3D Printed Concrete
- Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-08)
Fracture Properties of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
- Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials
- Yue J., Beskos Dimitrios, Feng C., Wu Kai (2022-11)
Hardened Fracture Characteristics of Printed Concrete Using Acoustic Emission Monitoring Technique
- Wu Yun-Chen, Li Mo (2022-09)
Effects of Early-Age Rheology and Printing Time Interval on Late-Age Fracture Characteristics of 3D Printed Concrete
- Maier Marcus, Lees Janet (2022-07)
Inter-Layer Fracture Behavior of Functionally Layered Concrete
- Marcucci Andrea, Kompella Sriram, Monte Francesco, Levi Marinella et al. (2022-06)
Early-Age Shear and Tensile Fracture Properties of 3D Printable Cementitious Mortar to Assess Printability Window
- Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
- Kompella Sriram, Monte Francesco, Cucchi Marco, Marcucci Andrea et al. (2021-12)
A Methodology to Assess Early-Age Fracture Performance of 3D Printable Cementitious Mixes
- Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
- Wu Yun-Chen, Cotrell Jason, Li Mo (2020-07)
Inter-Layer Effect on Fracture Behavior of 3D Printing Concrete
- Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs