Skip to content

#green

Keywords by Co - Occurrence

  1. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
    Next-Generation Green Construction:
    3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
  2. Baghdadi Abtin, Khanipour Raad Kian, Dörrie Robin, Kloft Harald (2025-12)
    Fabrication of Dry Connection Through Stamping and Milling of Green-State Concrete
  3. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
  4. Türk Ayşe, Türk Furkan, Edebali Serpil, Keskin Ülkü (2025-11)
    3D Printable Mortars with Green Materials:
    Sustainable Solutions with Nanocellulose
  5. Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
    Towards Greener 3D Printing:
    A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
  6. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
  7. Lyu Ping, Wang Kejin, Doyle Shelby, Laflamme Simon et al. (2025-10)
    Green 3D Printing Concrete Containing Biochar and Waste Wind Turbine Blade Powder
  8. Rahman Mahfuzur, An Dong, Rawat Sanket, Yang Richard et al. (2025-09)
    Development of Green 3D Printable Cementitious Composites Using Multi-Response Optimisation Method
  9. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
  10. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
  11. Pemas Sotirios, Baliakas Dimitrios, Pechlivani Eleftheria, Stefanidou Maria (2025-07)
    Mechanical Properties of Bio-Printed Mortars with Bio-Additives for Green and Sustainable Construction
  12. Niroumand Hamed, Bałachowski Lech (2025-05)
    Green Building with 3D Printed Earth Materials:
    Current Issues and Future Prospects of 3D Printed Green Houses for the Construction Sector
  13. Jin Chenxi, Xu Chenhan, Xu Weishun (2025-05)
    Integrating 3D-Printed Clay Formwork into Thin-Vaulted Green Roof
  14. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
    Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
  15. Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
    Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
  16. Kruger Jacques, Zijl Gideon (2024-11)
    A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
    From Green to Solid State
  17. Raza Muhammad, Zhong Ray (2024-10)
    Integration of Additive Manufacturing, Lean and Green Construction:
    A Conceptual Framework
  18. Shahib Al Bari M., Ekaputri Januarti (2024-09)
    The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
  19. Liu Xiaoshuang, Li Shiming, Duan Yanjun, Du Zhiqin et al. (2024-09)
    Influence of Printing Interval on the Imbibition Behavior of 3D Printed Foam-Concrete for Sustainable and Green Building Applications
  20. Dörrie Robin, Kloft Harald, Sawicki Bartłomiej, Freund Niklas et al. (2024-09)
    Automated Reinforcement Integration in Shotcrete 3D Printing Through Green State Milling
  21. Wolf Alexander, Bauer Simon, Knaack Ulrich (2024-09)
    Green Klinkers:
    A Strategy to Include Plants in Double-Shell Masonry
  22. Dorresteijn Evelien, Tsiotou Sofia, Lowke Dirk (2024-07)
    Keeping the Processability of a Clay Mortar for Extrusion 3D Printing While Decreasing Shrinkage and Increasing the Green Strength
  23. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
    Building a Greener Future:
    Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
  24. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
    Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
    Printability and Environmental Perspective
  25. Xu Weishun, Jin Chenxi, Qian Xidong, Jin Zihao (2024-04)
    Mass-Customization of Integrated Green Wall Building Blocks through Clay Printing Formwork
  26. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
    Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
  27. Gou Hongxiang, Sofi Massoud, Zhang Zipeng, Zhu Mintao et al. (2024-03)
    Combined Printable and Mechanical Analysis of 3D Printed Green High-Strength, Lightweight Engineered Cementitious Composites
  28. Mohsen Mohamed, Diseet Malak, Aburumman Mervat, Taha Ramzi et al. (2023-09)
    3D Printed Clay Enhanced with Graphene-Nano-Platelets for Sustainable and Green Construction
  29. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  30. Mai (née Dressler) Inka, Brohmann Leon, Freund Niklas, Gantner Stefan et al. (2021-10)
    Large Particle 3D Concrete Printing:
    A Green and Viable Solution
  31. Dobrzanski James, Buswell Richard, Cavalaro Sergio, Kinnell Peter et al. (2021-09)
    Milling a Cement-Based 3D Printable Mortar in Its Green State Using a Ball-Nosed Cutter
  32. Falliano Devid, Domenico Dario, Cosenza Paolo, Ricciardi Giuseppe et al. (2021-04)
    Green High-Performance Mortars for 3D Printing Applications
  33. Wang Shian, Liu Chi, Zhang Guo, Luo Qi et al. (2020-08)
    Digital Planting:
    Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
  34. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
    Print-Cast Concrete:
    Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
  35. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-07)
    Use of the Chemical and Mineral Admixtures to Tailor the Rheology and the Green Strength of 3D Printing Cementitious Mixtures
  36. Voigt Thomas, Malonn Tim, Shah Surendra (2005-10)
    Green and Early-Age Compressive Strength of Extruded Cement Mortar Monitored with Compression Tests and Ultrasonic Techniques