Skip to content

Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication (2018-09)

Correction

10.1007/978-3-319-99519-9_31

 Wangler Timothy,  Flatt Robert
Contribution - Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication

Abstract

The original version of the book was inadvertently published without incorporating the corrections, which were now updated as follows:

0 References

25 Citations

  1. Cao Yifang, Shen Luming, Mukherjee Abhijit, Abbas Ali et al. (2025-07)
    Improvement of the Interlayer Bonding Strength in a 3D-Printed Mortar with Biocement Sprayed into Interlayer Surfaces
  2. Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
    The Rise of Aerial Additive Manufacturing in Construction:
    A Review of Material Advancements
  3. Ostovari Shadi, Shayani Hooman (2024-06)
    Simulation and Analysis of Automated Generalised Interleaved Layered Execution (AGILE) Process for Concrete Shell-Structures
  4. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  5. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
    A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
    From Analytical Modelling to Numerical Simulation
  6. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
    Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
    A Detailed Review
  7. Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
    Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials
  8. Lloret-Fritschi Ena, Choma Joseph, Scotto Fabio, Szabó Anna et al. (2023-02)
    In-Crease:
    Less Concrete More Paper
  9. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
    Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
  10. Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
    3D Printed Geopolymer Composites:
    A Review
  11. Raza Muhammad, Zhong Ray (2022-08)
    A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
  12. Brooks Adam, He Yawen, Farzadnia Nima, Seyfimakrani Shayan et al. (2022-03)
    Incorporating PCM-Enabled Thermal Energy Storage into 3D Printable Cementitious Composites
  13. Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
    3D Printable Alkali-Activated Concretes for Building Applications:
    A Critical Review
  14. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
  15. Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
    Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
  16. Falliano Devid, Crupi Giuseppe, Domenico Dario, Ricciardi Giuseppe et al. (2020-07)
    Investigation on the Rheological Behavior of Lightweight Foamed Concrete for 3D Printing Applications
  17. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
  18. Westerlind Helena, Vargas José (2020-07)
    Knitting Concrete
  19. Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
    Setting-on-Demand for Digital Concrete:
    Principles, Measurements, Chemistry, Validation
  20. He Yawen, Zhang Yamei, Zhang Chao, Zhou Hongyu (2020-05)
    Energy-Saving-Potential of 3D Printed Concrete Building with Integrated Living Wall
  21. Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
    Cement-Based Additive Manufacturing:
    Experimental Investigation of Process Quality
  22. Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
    3D Printed Concrete:
    Applications, Performance, and Challenges
  23. Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
    Revisiting Folded Forms with Digital Fabrication
  24. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
    Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
  25. Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
    A Systematical Review of 3D Printable Cementitious Materials

BibTeX 
@inproceedings{wang_flat.2019.Pot1RICoCaDFb,
  author            = "Timothy Paul Wangler and Robert Johann Flatt",
  title             = "Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Correction",
  doi               = "10.1007/978-3-319-99519-9_31",
  year              = "2019",
  volume            = "19",
  booktitle         = "Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2018",
  editor            = "Timothy Paul Wangler and Robert Johann Flatt",
}
Formatted Citation

T. P. Wangler and R. J. Flatt, “Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Correction”, in Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2018, 2019, vol. 19. doi: 10.1007/978-3-319-99519-9_31.

Wangler, Timothy Paul, and Robert Johann Flatt. “Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Correction”. In Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2018, edited by Timothy Paul Wangler and Robert Johann Flatt, Vol. 19, 2019. https://doi.org/10.1007/978-3-319-99519-9_31.