Skip to content

#concept

Keywords by Co - Occurrence

  1. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
    Adaptive-Binder-Aggregate Mixing (ABAM):
    Concept for Extrusion-Based Multi-Material 3D Concrete Printing
  2. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
  3. Yarlagadda Tejeswar, Zhang Zixin, Jiang Liming, Usmani Asif (2025-08)
    A Conceptual Model for Building Artistic and Geometrically Complex Building Envelopes Using Concrete 3D Printing
  4. Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
    3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
    Concept and Bond Tests
  5. Sun Hou-Qi, Zeng Jun-Jie, Zhuge Yan, Liu Yue (2025-06)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Tests
  6. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
    Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
  7. Sun Hou-Qi, Zeng Jun-Jie, Hong Guang-Yao, Zhuge Yan et al. (2025-01)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Behavior
  8. Raza Muhammad, Zhong Ray (2024-10)
    Integration of Additive Manufacturing, Lean and Green Construction:
    A Conceptual Framework
  9. Brodmann Anton, Damtsas Efstathios, Schult Christoph, Spaeth Benjamin et al. (2024-09)
    DesignBuild Project of a 3D Printed Concrete Shell with a Segmented and Stereotomic Construction Concept
  10. Dounas Theodoros, Berdos Yorgos, Vele Jiří (2024-09)
    Towards a Decentralized Physical Infrastructure for Additive Manufacturing in Architecture:
    A Proof of Concept for a Tamper Proof, Secure Connection Between Designs, Blockchains and 3D Printers
  11. Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
    A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
  12. Hanžič Lucija, Šter Katarina, Štefančič Mateja (2024-09)
    Implementing the Excess-Paste-Concept for a Systematic Mix-Design of Printable Concrete
  13. Remke Sebastian, Kandy Sharu, Sant Gaurav, Gädt Torben (2024-09)
    A Hybrid Binder Concept for a Swift Liquid-to-Solid Transition in 3D Printing of Suspensions
  14. Jenny Ercan, Gawel Abel (2024-09)
    Sustainable Construction Through On‐Site Robotic Fabrication:
    Past and Future Concepts
  15. Labuda Igor, Pugliese Federica, Dzwierzynska Jolanata (2024-03)
    An Innovative Concept for 3D Sand-Printed Sustainable Refugee Shelters in a Sandy Desert in a Hot and Dry Climate
  16. Xiao Jianzhuang, Liu Haoran, Ding Tao, Yu Kequan et al. (2024-02)
    Rebar-Free Concrete Construction:
    Concept, Opportunities and Challenges
  17. Sun Yubo, Mohan Manu, Tao Yaxin, Zhang Yi et al. (2024-02)
    A Conceptual Design of Two-Stream Alkali-Activated Materials
  18. Sedghi Reza, Rashidi Kourosh, Hojati Maryam (2024-01)
    Large-Scale 3D Wall Printing:
    From Concept to Reality
  19. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2023-11)
    Development of a Prototype Concept for Using 3D Concrete Printing in Pavement Construction
  20. Pillay Selicia, Walls Richard, Merwe Johann (2023-07)
    Conceptualising the Behavior of 3D Printed Concrete Structures in Fire
  21. Fairbairn Eduardo, Santos Larissa, Mendoza Reales Oscar, Farias Marina et al. (2023-06)
    New Conceptions and Constructive Methods for Pumped Storage Hydropower-Plants
  22. Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
    Qualitative Technology Evaluation of Digital Fabrication with Concrete:
    Conceptual Framework and Scoreboard
  23. Pressmair Nadine, Kromoser Benjamin (2023-06)
    Development-Stages of Structurally Optimized Concrete Girders:
    Design-Concepts, Material-Strategies and Experimental Investigation
  24. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
    Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
    A Scientometric Review
  25. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
    A New Concept for Large Additive Manufacturing in Construction:
    Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
  26. Guanziroli Stefano, Marcucci Andrea, Negrini Alberto, Ferrara Liberato et al. (2022-10)
    A New Concept of Additive Manufacturing for the Regeneration of Existing Tunnels
  27. Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
    Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower
  28. Cho Seung, Heever Marchant, Kruger Jacques, Zijl Gideon (2022-06)
    Proof of Concept:
    Sprayable SHCC Overlay Reinforcement Regime for Unreinforced 3D Printed Concrete Structure
  29. Gran Erik, Madrid Javier, Ortega Guillermo, Tenorio Ríos José et al. (2022-05)
    Conceptual Study and Literature Review of Integration of Lean Manufacturing and 3D Printing in Construction to Support Sustainability
  30. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
    Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
    Concepts and Initial Case Studies
  31. Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
    Mix-Design Concepts for 3D Printable Concrete:
    A Review
  32. Katzer Jacek, Skoratko Aneta (2021-03)
    Concept of Using 3D Printing for Production of Concrete-Plastic Columns with Unconventional Cross-Sections
  33. Voney Vera, Odaglia Pietro, Brumaud Coralie, Dillenburger Benjamin et al. (2021-02)
    From Casting to 3D Printing Geopolymers:
    A Proof of Concept
  34. Claßen Martin, Claßen Johannes, Sharma Rahul (2020-08)
    Conception of a Real World 3D Printing Method for Reinforced Concrete (AMoRC)
  35. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
    Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
    Concept and Feasibility Study
  36. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
    Large-Scale Digital Concrete Construction:
    CONPrint3D Concept for On-Site, Monolithic 3D Printing
  37. Ibrahim Serhat, Olbrich Alexander, Lindemann Hendrik, Gerbers Roman et al. (2018-02)
    Automated Additive Manufacturing of Concrete Structures without Formwork:
    Concept for Path-Planning
  38. Wörner Mark, Schmeer Daniel, Schuler Benjamin, Pfinder Julian et al. (2016-12)
    The Technology of Graded Concrete:
    From the Development of Concrete Mixtures and the Conceptual Design to the Automatized Manufacturing
  39. Thangavelu Madhu, Khoshnevis Behrokh, Carlson Anders, Leach Neil (2012-09)
    Architectural Concepts Employing Co-Robot-Strategy and Contour Crafting Technologies for Lunar Settlement Infrastructure Development