Qian Ye¶

1. Li Shiping, Sun Yan, Zhang Daxu, Chen Wujun et al. (2026-03)
   Bio-Inspired Bouligand Architectures Enable Biaxial Toughening and Programmable Energy Dissipation in 3D-Printed Strain-Hardening Cementitious Composites
2. Du Guoqiang, Sun Yan, Deng Xiaowei, Qian Ye (2026-02)
   Bending Performance of Bio-Inspired 3D Printed Porous Lattice SHCC Circular Arch Structures
3. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
   Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
4. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-11)
   Bio-Inspired Jigsaw-Interlocking Suture Interfaces for Enhanced Flexural Response of 3D-Printed Strain-Hardening Cementitious Composites
5. Du Guoqiang, Deng Xiaowei, Qian Ye (2025-09)
   Biomimetic 3D Printed Herringbone-Bouligand Cementitious Composites for Ultra-High Impact Performance
6. Li Shiping, Sun Yan, Qian Ye, Chen Wujun et al. (2025-08)
   Bio-Inspired Bouligand Architectures for Enhanced Flexural Performance in 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
7. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
   Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
8. Du Guoqiang, Sun Yan, Qian Ye (2025-03)
   In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures
9. Du Guoqiang, Qian Ye (2025-01)
   Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
10. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired 3D Printing of Strain-Hardening Cementitious Composites Reticulated Shell-Roofs
11. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired Innovations in 3D Concrete Printing:
    Structures, Materials and Applications
12. Du Guoqiang, Sun Yan, Qian Ye (2024-10)
    Nature-Inspired Approach for Enhancing the Fracture Performance of 3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
13. Qiu Minghong, Sun Yan, Qian Ye (2024-09)
    Impact of Groove-and-Tongue Parameters on the Bonding Behavior Between 3D Printed UHP-SHCC and Cast Normal Concrete
14. Du Guoqiang, Sun Yan, Qian Ye (2024-08)
    3D Printed Strain-Hardening Cementitious Composites (3DP-SHCC) Reticulated Shell Roof Inspired by the Water Spider
15. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
    Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
16. Du Guoqiang, Qian Ye (2024-05)
    Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites
17. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
    Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
18. Du Guoqiang, Sun Yan, Qian Ye (2024-03)
    Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures
19. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
    Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
20. Xu Nuoyan, Qian Ye (2023-04)
    Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
21. He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
    Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
    An Experimental and Theoretical Investigation
22. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
    Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
23. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
    Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
24. Tay Yi, Qian Ye, Tan Ming (2019-05)
    Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test
25. Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
    Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent
26. Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
    Utilization of Recycled Glass for 3D Concrete Printing:
    Rheological and Mechanical Properties
27. Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
    A Systematical Review of 3D Printable Cementitious Materials
28. Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
    Time-Gap-Effect on Bond Strength of 3D Printed Concrete
29. Qian Ye, Schutter Geert (2018-06)
    Enhancing Thixotropy of Fresh Cement-Pastes with Nano-Clay in Presence of Polycarboxylate-Ether Superplasticizer (PCE)
30. Qian Ye, Schutter Geert (2018-04)
    Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
31. Qian Ye, Kawashima Shiho (2016-09)
    Use of Creep Recovery Protocol to Measure Static Yield-Stress and Structural Rebuilding of Fresh Cement-Pastes