Skip to content

#size

Keywords by Co - Occurrence

  1. Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
    Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
    A Nonlinear Finite Element Study
  2. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
    Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
  3. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
    Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
  4. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
    Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
    A Case Study of a Full-Size Two-Story Building
  5. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
    Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
    Experiment, Microstructure, and Mechanism Analysis
  6. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  7. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
    Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
    From Material-Design to Structural Bearing-Capacity-Assessment
  8. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  9. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
    Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
  10. Egawa Ryo, Nezu Shoichi, Nishijo Keisuke, Ohno Kazunori et al. (2024-09)
    Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer
  11. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
    Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
  12. Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2024-05)
    Strategies Towards Large-Scale 3D Printing Without Size-Constraints
  13. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
    Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
  14. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
    Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
  15. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
  16. Wang Youyu, Ma Guowei, Wang Li, Zhang Wengang et al. (2023-04)
    Size-Effects in Cavern-Model-Tests Based on 3D Printing
  17. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
    Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
  18. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
    Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
  19. Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
    Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution
  20. Sambucci Matteo, Valente Marco (2021-06)
    Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
  21. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
  22. Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
    Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing
  23. Carstensen Josephine (2020-06)
    Topology-Optimization with Nozzle-Size-Restrictions for Material-Extrusion-Type Additive Manufacturing
  24. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
    Steel-Fiber-Reinforced 3D Printed Concrete:
    Influence of Fiber Sizes on Mechanical Performance
  25. Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
    Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle
  26. Zuo Zibo, Gong Jian, Huang Yulin, Zhan Yijian et al. (2019-03)
    Experimental Research on Transition from Scale 3D Printing to Full-Size Printing in Construction
  27. Zareiyan Babak, Khoshnevis Behrokh (2017-06)
    Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
    Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness
  28. Khoshnevis Behrokh, Dutton Rosanne (1998-01)
    Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials