Skip to content

#data

Keywords by Co - Occurrence

  1. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
  2. Skoury Lior, Asaf Ofer, Sprecher Aaron, Menges Achim et al. (2025-12)
    Data-Informed Digital Twin for Large-Scale 3D Printing in Construction
  3. Hammoud Ahmad, Mohomad Yosef, Shomar Hasan, Masad Eyad et al. (2025-12)
    Data-Driven Framework for Printability and Geometric Quality Prediction in 3D Concrete Printing
  4. Abbas Yassir, Alsaif Abdulaziz (2025-11)
    Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
    Interpreting Nonlinear Synergies Among Binder Components and Proportions
  5. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
  6. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2025-11)
    Data-Driven Design of Sustainable LC³ for 3D Printing with Omani Clays
  7. Elselmy Rowan (2025-10)
    AI-Driven Cymatic Architecture:
    Integrating Generative AI and Sound Data for 3D Concrete Printed Façade Design
  8. Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
    Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
    An Interpretable Data-Driven Approach
  9. Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
    Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
  10. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
    Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
  11. Chen Baixi, Yang Lei, Jiang Sheng (2025-09)
    Stochastic Analysis of 3D Concrete Printing Process with Curvature and Inclination by Explainable Data-Driven Modelling
  12. Cai Yilin, Hartell Julie, Aryal Ashrant (2025-07)
    Real-Time Multimodal Sensing System for Additive Construction by Extrusion:
    Integrating Thermal, Depth and RGB Data
  13. Maboudi Mehdi, Mawas Karam, Gerke Markus (2025-07)
    Geometric Inspection in 3D Concrete Manufacturing:
    Comparison of Data Capturing Techniques
  14. Chen Baixi, Qian Xiaoping (2025-07)
    Explainable Data-Driven Analysis of Uncertainty Propagation in 3D Concrete Printing via Adaptive Polynomial Chaos Expansion
  15. Rusu Mihai, Ardelean Ioan (2025-06)
    Relations Between the Printability Descriptors of Mortar and NMR Relaxometry Data
  16. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
    Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
    Mechanical Properties of 3D Printed Concrete
  17. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part II: Moisture and Heat
  18. Bettermann Luca, Slepicka Martin, Esser Sebastian, Borrmann André (2025-05)
    Data-Driven Parameter Calibration in Additive Manufacturing for Construction:
    An Introduction to Learning by Printing
  19. Jesus Manuel, Teixeira João, Guimarães Ana, Rangel Bárbara et al. (2025-04)
    From 3D Survey Data of Cultural Heritage Artifacts to 3D Printed Prototypes Based on Cement and Lime-Based Mortars
  20. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part I: Geometry
  21. Lori Ali, Mehrali Mehdi (2025-01)
    Filament-Geometry-Control of Printable Geopolymer Using Experimental and Data-Driven Approaches
  22. Schossler Rodrigo, Ullah Shafi, Alajlan Zaid, Yu Xiong (2025-01)
    Data-Driven Analysis in 3D Concrete Printing:
    Predicting and Optimizing Construction Mixtures
  23. Lin Yuxin, Meibodi Mania (2024-11)
    Integrated Sensing Printhead:
    In-line Data Collection for Non-Planar 3D Concrete Printing
  24. Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
    Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms
  25. Chen Baixi, Qian Xiaoping (2024-09)
    Data-Driven Reliability-Oriented Buildability-Analysis of 3D Concrete Printed Curved Wall
  26. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2024-09)
    Data-Driven Design-Process and Production of Stress-Optimized Concrete Girders with Integrated Tendons Using 3D Printing
  27. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
  28. Schönsee Eric, Jeyifous Olubunmi, Strangfeld Christoph, Hüsken Götz (2024-09)
    Investigations on Multi-Sensor Data for Monitoring Volume Flow During the Printing Process
  29. Gao Jianhao, Wang Chaofeng, Li Jiaqi, Chu S. (2024-09)
    Data-Driven Rheological-Model for 3D Printable Concrete
  30. Rehman Saif, Riaz Raja, Usman Muhammad, Kim In-Ho (2024-08)
    Augmented Data-Driven Approach Towards 3D Printed Concrete Mix Prediction
  31. Alhussain Ali, Duarte José, Brown Nathan (2024-02)
    Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing
  32. Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
    Digital Twinning in Additive Manufacturing:
    Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
  33. Khademi Pooria, Toufigh Vahab (2023-09)
    Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
  34. Mawas Karam, Maboudi Mehdi, Gerke Markus (2023-09)
    Filament Extraction in 3D Printing of Shotcrete Walls from Terrestrial Laser Scanner Data
  35. Slepicka Martin, Helou Jalal, Borrmann André (2023-07)
    Real-Time Data Exchange Robot-Control Integration for Fabrication Information Modeling
  36. Schönsee Eric, Hüsken Götz, Jeyifous Olubunmi, Mezhov Alexander et al. (2023-06)
    Calculating Rheological Properties of Fresh Mortar for Additive Manufacturing Based on Experimental, Multi-Sensor Data
  37. Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
    Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
  38. Ignatova Elena, Kirichek Pavel (2022-04)
    Additive Manufacturing Based on Building Information-Model-Data
  39. Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
    Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction