Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete (2018-09)¶
, ,
Contribution - Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication, pp. 225-233
Abstract
This contribution addresses corrosion of steel in digitally fabricated concrete. In recent times the concrete processing for digital fabrication applications has been greatly advancing, rising the interest of research institutions, industrial partners, governments and public media. Nevertheless, for a broad large scale application, not just the technological feasibility, but also the long term durability needs to be ensured. This contribution presents a general overview of recently developed digital fabrication technologies and assesses them from the point of view of reinforcement corrosion risks. Experimental results are presented and a number of potential durability issues specific to digital fabrication are raised. On the other hand, we highlight opportunities for making more corrosion-resistant concrete structures by taking advantage of digital fabrication technology.
¶
2 References
9 Citations
- Givkashi Mohammad (2025-11)
Durability of 3D Printed Concrete Containing Air-Entraining Agent:
Evaluating the Importance of Carbonation Resistance - Kompella Sriram, Marcucci Andrea, Monte Francesco, Levi Marinella et al. (2024-04)
Fracture Behavior of Three-Dimensional-Printable Cementitious Mortars in Very Early-Ages and Hardened States - Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
Test-Methods for 3D Printable Concrete - Inaty Francois, Baz Bilal, Aouad Georges (2022-07)
Long-Term Durability-Assessment of 3D Printed Concrete - Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
Structural Design and Testing of Digitally Manufactured Concrete Structures - Malan Jean, Rooyen Algurnon, Zijl Gideon (2021-12)
Chloride-Induced Corrosion and Carbonation in 3D Printed Concrete - Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments - Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar - Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
Digital Concrete:
A Review
BibTeX
@inproceedings{stef_angs_else.2019.CCaOiDFoRC,
author = "Matteo Stefanoni and Ueli M. Angst and Bernhard Elsener",
title = "Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete",
doi = "10.1007/978-3-319-99519-9_21",
year = "2019",
volume = "19",
pages = "225--233",
booktitle = "Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2018",
editor = "Timothy Paul Wangler and Robert Johann Flatt",
}
Formatted Citation
M. Stefanoni, U. M. Angst and B. Elsener, “Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete”, in Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2018, 2019, vol. 19, pp. 225–233. doi: 10.1007/978-3-319-99519-9_21.
Stefanoni, Matteo, Ueli M. Angst, and Bernhard Elsener. “Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete”. In Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication: Digital Concrete 2018, edited by Timothy Paul Wangler and Robert Johann Flatt, 19:225–33, 2019. https://doi.org/10.1007/978-3-319-99519-9_21.