Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion (2021-06)¶
10.1061/(asce)ae.1943-5568.0000485
, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi
Journal Article - Journal of Architectural Engineering, Vol. 27, Iss. 3
Abstract
In the architectural design field, a practical challenge when producing curvilinear geometry with concrete remains. Currently, the use of three-dimensional printing (3DP) technology with concrete during construction has become of interest for engineers and architects with the expectation to mitigate this type of challenge; however, the level of understanding of the construction process is unclear. This paper will present a case study for the design and construction process for a self-supporting curvilinear geometry architecture termed a multipurpose pavilion. The methods in the case study include computer-aided design, structural analysis, joint assembly, and site construction techniques. The results present the benefits and current limitations of the existing technology and could contribute as a method for 3DP design and construction.
¶
15 References
- Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
Freeform Construction:
Mega-Scale Rapid Manufacturing for Construction - Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology - Farina Ilenia, Fabbrocino F., Carpentieri G., Modano M. et al. (2015-12)
On the Reinforcement of Cement Mortars through 3D Printed Polymeric- and Metallic-Fibers - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Jiramarootapong Patiphat, Prasittisopin Lapyote, Snguanyat Chalermwut, Tanapornraweekit Ganchai et al. (2020-07)
Load Carrying Capacity and Failure Mode of 3D Printing Mortar Wall Panel Under Axial Compression Loading - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
Extrusion-Based Concrete 3D Printing from a Material Perspective:
A State of the Art Review - Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
A Review of 3D Concrete Printing Systems and Materials Properties:
Current Status and Future Research Prospects - Prasittisopin Lapyote, Pongpaisanseree Kittisak, Jiramarootapong Patiphat, Snguanyat Chalermwut (2020-07)
Thermal- and Sound-Insulation of Large-Scale 3D Extrusion-Printing Wall-Panel - Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
3D Printing Trends in Building and Construction Industry:
A Review - Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2016-07)
Large-Scale 3D Printing of Complex Geometric Shapes in Construction - Vantyghem Gieljan, Corte Wouter, Shakour Emad, Amir Oded (2020-01)
3D Printing of a Post-Tensioned Concrete Girder Designed by Topology-Optimization - Zareiyan Babak, Khoshnevis Behrokh (2017-08)
Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
15 Citations
- Nguyen Nhat, Javan Kazem, Jordan Adam, Akbarnezhad Ali et al. (2026-01)
Techno-Economic Analysis of 3D Printed Modular Housing:
Productivity, Cost, and Environmental Assessment - Hasani Alireza, Dorafshan Sattar (2025-11)
Evaluation of Fresh, Hardened, and Durability Properties of Three-Dimensional Concrete Printed Pipes - Banihashemi Saeed, Akbarnezhad Ali, Sheikhkhoshkar Moslem, Haouzi Hind et al. (2025-08)
3D Printing in Construction:
Sustainable Technology for Building Industry - Prasittisopin Lapyote (2024-11)
How 3D Printing Technology Makes Cities Smarter:
A Review, Thematic Analysis, and Perspectives - Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
Selection of Digital Fabrication Technique in the Construction Industry:
A Multi-Criteria Decision-Making Approach - Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design - Yoshihara Rei, Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2024-04)
Evaluation of Aggregate-Distribution Heterogeneity in 3D Printed Concrete by Means of X-Ray CT - Khan Mohammad, Dani Aflah, Lim James, Roy Krishanu (2024-04)
Appraising the Feasibility of 3D Printing Construction in New Zealand Housing - Labuda Igor, Pugliese Federica, Dzwierzynska Jolanata (2024-03)
An Innovative Concept for 3D Sand-Printed Sustainable Refugee Shelters in a Sandy Desert in a Hot and Dry Climate - Sarı Ramazan, Çalışkan Ekrem (2024-03)
Emerging Technologies in Building Construction - Sedghi Reza, Zafar Muhammad, Hojati Maryam (2023-10)
Exploring Fresh and Hardened Properties of Sustainable 3D Printed Lightweight Cementitious Mixtures - Forcael Eric, Martínez-Chabur Paula, Ramírez-Cifuentes Iván, García-Alvarado Rodrigo et al. (2023-05)
Performance-Analysis of 3D Concrete Printing Processes Through Discrete-Event-Simulation - Wan Qian, Yang Wenwei, Wang Li, Ma Guowei (2023-04)
Global Continuous Path-Planning for 3D Concrete Printing Multi-Branched Structure - Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
A Review - Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2022-12)
3D Cement Printing:
DFMA Guideline of Patterned Load-Bearing Walls for Small Residential Units
BibTeX
@article{pras_sakd_hora.2021.DaCMoa3CPSSCLP,
author = "Lapyote Prasittisopin and Thanut Sakdanaraseth and Vimolsiddhi Horayangkura",
title = "Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion",
doi = "10.1061/(asce)ae.1943-5568.0000485",
year = "2021",
journal = "Journal of Architectural Engineering",
volume = "27",
number = "3",
}
Formatted Citation
L. Prasittisopin, T. Sakdanaraseth and V. Horayangkura, “Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion”, Journal of Architectural Engineering, vol. 27, no. 3, 2021, doi: 10.1061/(asce)ae.1943-5568.0000485.
Prasittisopin, Lapyote, Thanut Sakdanaraseth, and Vimolsiddhi Horayangkura. “Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion”. Journal of Architectural Engineering 27, no. 3 (2021). https://doi.org/10.1061/(asce)ae.1943-5568.0000485.