Skip to content

#determination

Keywords by Co - Occurrence

  1. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Mustafa Ali et al. (2025-12)
    Passive Determination of Anisotropic Compressive Strength of 3D Printed Concrete Using Multiple Neural Networks Enhanced with Explainable Machine Learning (XML)
  2. Solaiappan Kamesh, Foruzanmehr M. (2025-11)
    A Rheological Test Method for Determining the Printability Zone of Cementitious 3D Printers
  3. Liao Minmao, Gerong Wangdui, Wang Pengfei, Chen Zhaohui (2025-08)
    Determination of Elastic Engineering Constants in an Orthotropic Constitutive Model for Hardened 3D-Printed Concrete
  4. Ewerz Johannes, Pfleger Marc-Patrick, Radl Elisabeth, Huber Patrick (2025-06)
    Concrete 3D Printing and Reinforcement:
    Determination of Bond Strength Through Pull-Out Tests
  5. Hlobil Michal, Michel Luca, Pundir Mohit, Kammer David (2025-03)
    A Thermo-Hygro Model to Determine the Factors Dictating Cold Joint Formation in 3D Printed Concrete
  6. Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
    Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test
  7. Skibicki Szymon, Dvořák Richard, Pazdera Luboš, Topolář Libor et al. (2024-11)
    Anisotropic Mechanical Properties of 3D Printed Mortar Determined by Standard Flexural and Compression-Test and Acoustic Emission
  8. Song Xinlei, Sun Xiaoyan, Wang Hailong (2024-09)
    Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-Objective Optimization Method
  9. Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
    Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
  10. Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
    Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
  11. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
  12. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
  13. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
    Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
    Determining Significant Processing Parameters and Their Effect on Mechanical Strength
  14. Sukontasukkul Piti, Maho Buchit, Komkham Sila, Pianfuengfoo Satharat et al. (2023-07)
    Precise Determination of Initial Printable Time for Cement Mortar 3D Printing Using a Derivative Method
  15. Oh Sangwoo, Hong Geuntae, Choi Seongcheol (2023-05)
    Determining the Effect of Superabsorbent Polymers, Macrofibers, and Resting Time on the Rheological Properties of Cement Mortar Using Analysis of Variance:
    A 3D Printing Perspective
  16. Şahin Hatice, Temel Müge, Mardani Ali (2023-04)
    Determination of Optimum VMA Utilization Dosage in Cementitious Systems:
    In Terms of Rheological and Flowability Properties
  17. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
    Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
  18. Yoris-Nobile Adrian, Lizasoain-Arteaga Esther, Slebi-Acevedo Carlos, Blanco-Fernandez Elena et al. (2022-07)
    Life-Cycle-Assessment and Multi-Criteria Decision-Making-Analysis to Determine the Performance of 3D Printed Cement Mortars and Geopolymers
  19. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
    A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
  20. Stidwell Samuel, Kreiger Eric (2021-12)
    Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
  21. Wi Kwangwoo, Hong Jinxiang, Wang Kejin (2021-11)
    Determining Printable Zone of Three-Dimensional-Printable Mortar Using Flow-Table Tests
  22. Pott Ursula, Stephan Dietmar (2021-04)
    Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
  23. Zongo Karim, Charrier Malo, Duval Corentin, Ouellet-Plamondon Claudiane (2020-07)
    Dynamic and Static Yield-Stress Determination of Cementitious Paste with Admixtures