Comparative Evaluation of Rheological Models for 3D Printable Concrete (2022-04)¶
, Ravichandran Darssni, ,
Journal Article - Materials Today: Proceedings, Vol. 65, Iss. 2
Abstract
The study investigates different rheology models and examines the effect of dosage of different building materials in a 3D printable mix to achieve the desired rheology. The rheological properties of (i) Nano silica (NS), ii) Poly-vinyl Alcohol (PVA) fiber, and (iii) Class F - Fly ash are examined in the current study. The popular rheology models such as Bingham Model, Herschel-Bulkley model, and Power-law model are comparatively studied with the experimentally obtained rheological properties. Based on the study, it is found that the rheological parameters such as yield stress (Pa), Plastic viscosity (Pa.s), Power-law exponent, and consistency or flow co-efficient obtained from the aforementioned models are coherent with the experimental observations.
¶
8 References
- Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste - Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials - Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
A Review of 3D Concrete Printing Systems and Materials Properties:
Current Status and Future Research Prospects - Sikora Paweł, Chung Sang-Yeop, Liard Maxime, Lootens Didier et al. (2021-02)
The Effects of Nano-Silica on the Fresh and Hardened Properties of 3D Printable Mortars - Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
Digital Concrete:
Opportunities and Challenges - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry - Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
A Review of the Current Progress and Application of 3D Printed Concrete - Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
10 Citations
- Jamjala Siva, Thulasirangan Lakshmidevi Manivannan, Reddy K., Kafle Bidur et al. (2025-10)
A Critical Review on Synergistic Integration of Nanomaterials in 3D-Printed Concrete:
Rheology to Microstructure and Eco-Functionality - Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash - Vaishali Panneer, Varunkumar P. (2024-11)
Experimental Study on Behavior of Cement Concrete in 3d Printing - Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers - Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
A Review - Pedrosa Ana, Gaspar Florindo (2023-08)
Rheology-Assessment of Mortar-Materials for Additive Manufacturing - Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing - Giridhar Greeshma, Prem Prabhat, Jiao Dengwu (2023-03)
Effect of Varying Shear Rates at Different Resting Times on the Rheology of 3D Printable Concrete - Giridhar Greeshma, Prem Prabhat, Kumar Shankar (2023-01)
Development of Concrete Mixes for 3D Printing Using Simple Tools and Techniques - Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
Test-Methods for 3D Printable Concrete
BibTeX
@article{prem_ravi_kali_ambi.2022.CEoRMf3PC,
author = "Prabhat Ranjan Prem and Darssni Ravichandran and Senthil Kumar Kaliyavaradhan and Parukutty S. Ambily",
title = "Comparative Evaluation of Rheological Models for 3D Printable Concrete",
doi = "10.1016/j.matpr.2022.04.555",
year = "2022",
journal = "Materials Today: Proceedings",
volume = "65",
number = "2",
}
Formatted Citation
P. R. Prem, D. Ravichandran, S. K. Kaliyavaradhan and P. S. Ambily, “Comparative Evaluation of Rheological Models for 3D Printable Concrete”, Materials Today: Proceedings, vol. 65, no. 2, 2022, doi: 10.1016/j.matpr.2022.04.555.
Prem, Prabhat Ranjan, Darssni Ravichandran, Senthil Kumar Kaliyavaradhan, and Parukutty S. Ambily. “Comparative Evaluation of Rheological Models for 3D Printable Concrete”. Materials Today: Proceedings 65, no. 2 (2022). https://doi.org/10.1016/j.matpr.2022.04.555.