Skip to content

Additive Fertigung mit Beton (2022-09)

10.25368/2022.389

 Mechtcherine Viktor
Contribution - Beiträge zum 61. Forschungskolloquium mit 9. Jahrestagung des DAfStb, pp. 129-134

Abstract

This article provides an overview of the current state of affairs in the field of additive manufacturing processes with concrete, also known as 3D concrete printing. In particular, the associated material testing of printable or printed fresh, hardened and hardened concrete is discussed. Possible variants for the integration of reinforcement in additive manufacturing with concrete are also presented.

21 References

  1. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
    Additive Manufacturing of Reinforced Concrete:
    Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
  2. Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2020-07)
    Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
  3. Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
    Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements
  4. Ivanova Irina, Mechtcherine Viktor (2020-01)
    Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials
  5. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
    Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
  6. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
    The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing
  7. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
  8. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
    Integrating Reinforcement in Digital Fabrication with Concrete:
    A Review and Classification Framework
  9. Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
    Digital Concrete Construction by Means of Additive Processes:
    State of the Art and Research Needs
  10. Mechtcherine Viktor, Nerella Venkatesh (2018-10)
    3D-Concrete-Printing by Selective Deposition:
    Requirements for Fresh Concrete and Testing
  11. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
  12. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2020-11)
    3D Printing with Carbon Concrete:
    Technology and the First Test Results
  13. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
    Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
  14. Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
    In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction
  15. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
    Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
  16. Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
    Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate
  17. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
  18. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
  19. Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
    Vision of 3D Printing with Concrete:
    Technical, Economic and Environmental Potentials
  20. Weger Daniel, Stengel Thorsten, Gehlen Christoph, Maciejewski Yannick et al. (2021-12)
    Approval for the Construction of the First 3D Printed Detached House in Germany:
    Significance of Large-Scale Element Testing
  21. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
    Early-Age Mechanical Behaviour of 3D Printed Concrete:
    Numerical Modelling and Experimental Testing

0 Citations

BibTeX 
@inproceedings{mech.2022.AFmB,
  author            = "Viktor Mechtcherine",
  title             = "Additive Fertigung mit Beton",
  doi               = "10.25368/2022.389",
  year              = "2022",
  pages             = "129--134",
  booktitle         = "Beiträge zum 61. Forschungskolloquium mit 9. Jahrestagung des DAfStb",
  editor            = "Manfred Curbach and Steffen Marx and Viktor Mechtcherine",
}
Formatted Citation

V. Mechtcherine, “Additive Fertigung mit Beton”, in Beiträge zum 61. Forschungskolloquium mit 9. Jahrestagung des DAfStb, 2022, pp. 129–134. doi: 10.25368/2022.389.

Mechtcherine, Viktor. “Additive Fertigung Mit Beton”. In Beiträge Zum 61. Forschungskolloquium Mit 9. Jahrestagung Des DAfStb, edited by Manfred Curbach, Steffen Marx, and Viktor Mechtcherine, 129–34, 2022. https://doi.org/10.25368/2022.389.