Neithalath Narayanan¶

1. Tripathi Avinaya, Nair Sooraj, Rajan Subramaniam, Sant Gaurav et al. (2026-04)
   Deformation-Based Buildability Assessment of 3D Printed Concrete and Its Numerical Simulation
2. Tripathi Avinaya, Patel Devansh, Mobasher Barzin, Neithalath Narayanan (2026-03)
   Modeling of Layered, Multi-Material 3D-Printed Concrete Flexural Members:
   Towards Efficient Structural Design and Optimization
3. Tripathi Avinaya, Maurya Ashutosh, Rajan Subramaniam, Neithalath Narayanan (2026-02)
   Finite-Element Modeling Framework for Mechanical Response of 3D-Printed Concrete:
   Elucidating Directional, Interface, and Fiber Effects
4. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
   Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
5. Surehali Sahil, Venkatachalam Akshay, Divigalpitiya Ranjith, Kumar Aditya et al. (2025-06)
   Ultra-Low Dosages of Novel Graphene Types Enhance the Rheological Properties and Buildability of 3D Printed Binders
6. Kandy Sharu, Remke Sebastian, Ranganathan Thiyagarajan, Wani Shubham et al. (2025-01)
   Design and Function of Thermoresponsive-Ultrafast Stiffening Suspension Formulations for 3D Printing
7. Dai Xiaodi, Kandy Sharu, Neithalath Narayanan, Kumar Aditya et al. (2024-11)
   Thermally Stimulated Stiffening and Fly-Ash’s Alkaline-Activation by Ca(OH)2 Addition Facilitates 3D Printing
8. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
   Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
9. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
   Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
10. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
11. Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
    Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
12. Kandy Sharu, Mehdipour Iman, Neithalath Narayanan, Kumar Aditya et al. (2022-07)
    Ultrafast Stiffening of Concentrated Thermoresponsive Mineral-Suspensions
13. Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
    A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction
14. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
15. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
    Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
16. Nair Sooraj, Neithalath Narayanan (2021-11)
    Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry
17. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
    Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
18. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
19. Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
    Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
    Implications Towards Testing Methods
20. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
    A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
21. Alghamdi Hussam, Neithalath Narayanan (2019-07)
    Synthesis and Characterization of 3D Printable Geopolymeric Foams for Thermally Efficient Building Envelope Materials
22. Alghamdi Hussam, Nair Sooraj, Neithalath Narayanan (2019-02)
    Insights into Material-Design, Extrusion Rheology, and Properties of 3D Printable Alkali-Activated Fly-Ash-Based Binders
23. Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
    Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing
24. Yang Pu, Nair Sooraj, Neithalath Narayanan (2018-09)
    Discrete Element Simulations of Rheological Response of Cementitious Binders as Applied to 3D Printing