2026-03¶

1. Sun Hou-Qi, Zhou Jie-Kai, Xia Jun-Run, Zheng Jun-Jie et al. (2026-03)
   Interface Bonding Enhancement for FRP Grid Reinforced 3D-Printed Concrete Structures
2. Zhen Houru, Wang Zhendi, Wang Ling, Zeng Qiang et al. (2026-03)
   Interfacial Property and Microstructure Improvement of 3D Printed Concrete via Micro-Region Vibration
3. Zhu Tao, Wu Yuching, Zhi Peng, Zhu Peng et al. (2026-03)
   Non-Ordinary State-Based Peridynamics Simulation for Crack Propagation of 3D-Printed Fiber-Reinforced Concrete Beam Under Bending
4. Jiang Youbau, Li Shuaifeng, Xia Jiahui, Yang Fan et al. (2026-03)
   Experimental Studies on Impact Resistance of 3D Printed Concrete Spherical Structure with Carbon Fiber Reinforced PLA Honeycomb Energy Absorber
5. Rojas Omar, Nakamatsu Javier, Aguilar Rafael, Ñañez Robert et al. (2026-03)
   Improved Resistance to Water Erosion and Self-Healing Capacity of Earthen-Based 3D Printed Elements Using Enzyme-Induced Carbonate Precipitation (EICP)
6. Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
   Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
7. Xu Wenbin, Xu Zihao, Liu Tao, Ouyang Jun et al. (2026-03)
   A Prediction Model of Interlayer Bond Strength for 3D-Printed Concrete Considering Printing Interval and Environmental Effects
8. La Quoc, Meyer Knut, Kollmannsberger Stefan, Jänicke Ralf (2026-03)
   Viscoplastic Modeling the Evolving Mechanical Properties of Shotcrete 3D Printing Material
9. Maurya Shubham, Panda Biranchi, Dixit Uday (2026-03)
   Experimental Study on Void Reduction and Bonding Behavior in 3D Concrete Printing with a Trowel-Integrated Nozzle
10. Li Shiping, Sun Yan, Zhang Daxu, Chen Wujun et al. (2026-03)
    Bio-Inspired Bouligand Architectures Enable Biaxial Toughening and Programmable Energy Dissipation in 3D-Printed Strain-Hardening Cementitious Composites
11. Wang Qingwei, Pan Jinlong, Han Song, Zhu Binrong et al. (2026-03)
    Effects of Nozzle Height on the Layer Deposition Process and Forming Performance of 3D Printing Concrete:
    Evidence from Experiments and CFD Simulations
12. Wang Qian, Wang Li, Ma Guowei (2026-03)
    Advancing Sustainable Structures Through 3D Printed Concrete:
    Reinforcement Methods and Structural Design Philosophy
13. Baalal Salah, Oulkhir Fatima, Akhrif Iatimad, El Jai Mostapha (2026-03)
    Success of Hybrid Materials 3D Printing, Technological Insights and Risk Assessment:
    A Critical Review
14. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
    Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
    Sustainable Development and Environmental Impact Assessment
15. Mastropasqua Antonio, Lagrasta Francesco, Nicolò Michele, Pontrandolfo Pierpaolo (2026-03)
    Investigating the Environmental Impact of Additive Construction:
    A Systematic Analysis of the Life Cycle Assessment Studies
16. Silva Guido, Tudela Marcell, Rojas Omar, Llontop Camila et al. (2026-03)
    Printable Concrete with Multi-Source Recycled Aggregates:
    Particle Packing Design, Rheological Behavior, and 3D Printing Validation
17. Lasquite N., Ramos M., Alfeche F., Mendija L. et al. (2026-03)
    Novel Efficient-Inexpensive Development of Hydrophobic 3D-Printed Mortar Composite for Moisture Prevention Multi-Application
18. Luo Zhenhua, Sun Yuting, Mbabazi Justin, Du Qianyu et al. (2026-03)
    3D-Printed Concrete Structural Supercapacitor with PVA-KOH Enhanced Polymer Mortar Electrolyte
19. Punurai Wonsiri, Liu Yiliu (2026-03)
    Integrating Machine Learning with 3D Printing Concrete for Marine Structures:
    Mix Design, Strength Assessment, and Carbon Footprint Prediction
20. Xia Kailun, Chen Yuning, Yu Qian, Zhang Yamei (2026-03)
    Plastic Deformation Induced Non-Uniform Global Distribution of Microstructure and Related Performances Within 3D Printed Concrete
21. Zhang Haiyan, Gan Zhenxian, Chen Feihao, Chen Baixi (2026-03)
    Printability and Mechanical Performance of 3D Printable Geopolymer Concrete with Barium Chloride, Tartaric Acid, Sucrose, and Sodium Tripolyphosphate
22. Brunner Kim, Kostner Julia, Weger Daniel, Stengel Thorsten et al. (2026-03)
    Durability of Additively Manufactured SPI Components:
    Influence of Layer-Related Microstructural Characteristics
23. Katlav Metin, Turk Kazim (2026-03)
    Explainable Hybrid Machine Learning Approach for Mechanical Performance of 3D-Printed Strain-Hardening Cementitious Composites (3DP-SHCC)
24. Lal Dhirajkumar, Rangari Vinay, Khare Karan (2026-03)
    Structural Optimization and Cost-Efficient Development of an Indigenous Gantry-Type 3D Concrete Printing System for Scalable Construction Applications
25. Pessoa Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2026-03)
    Drying Process in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
26. Tripathi Avinaya, Patel Devansh, Mobasher Barzin, Neithalath Narayanan (2026-03)
    Modeling of Layered, Multi-Material 3D-Printed Concrete Flexural Members:
    Towards Efficient Structural Design and Optimization
27. Kumar S., Kumar L., Muthu Nelson, Panda Biranchi (2026-03)
    Toward Efficient Simulation of Cracked 3D-Printed Concrete Beams:
    Analytical and Homogenized Finite Element Approach
28. Dewi Melati, Wang Wei-Chien, Lin Wei-Ting (2026-03)
    Development of Low-Thermal-Conductivity Fly Ash Geopolymer Foam Mortars with Stabilizer Effects and 3D Printability Assessment
29. Luo Jianfen, Wang Qidong, Wang Lijia, Fang Mingyue (2026-03)
    A Review of the Rheological Properties of 3D-Printed Concrete:
    Raw Materials, Printing Parameters, and Evolution Mechanisms
30. Luo Jianfen, Wang Qidong, Wang Lijia, Fang Mingyue (2026-03)
    Effects of MXene on the Hydration Process, Pore Structure and Mechanical Performance of 3D-Printed Cementitious Materials
31. Zozaya Daiquiri, Shojaeian Hamideh, Uviña-Contreras Francisco, Hojati Maryam (2026-03)
    3D Printing of Earth-Based Mixtures:
    Linking Material Design, Printability, and Structural Performance
32. Gupta Shashank, Ghantous Rita, Weiss William, Moini Mohamadreza (2026-03)
    Pore Connectivity and Arrangement in Additively Manufactured Cementitious Material
33. Jiang Youbau, Zhang Zupan, Wen Jun, Gao Pengxiang et al. (2026-03)
    Toothed Nozzle Optimization for Enhancement of Interlayer Tensile Strength of 3D-Printed Concrete with CTGAN and XGBoost Model
34. Sun Yuhang, Liu Xiongfei, Zhang Yalei, Ma Guowei (2026-03)
    Spray-Based 3D Printed Tunnel Lining Concrete:
    Optimization of Full-Angle Printing Path
35. Warsi Syed, Panda Biranchi, Biswas Pankaj, Chandra Borsaikia Arun (2026-03)
    Design of Earthquake-Resistant 3D Printed Concrete Walls:
    An Integrated Experimental-Numerical Framework for Predicting Cyclic Performance of Full-Scale Structural Building Based on Wall Testing
36. Mao Yong, Cheng Jinyi, Guo Zhenbang, Chi Baihong et al. (2026-03)
    Fumed Silica Modulation of 3D-Printed Cement Paste::
    Rheology, Microstructure, and Printability
37. Omarov Bekarys, Ali Md., Memon Shazim (2026-03)
    A Novel Method to Enhance Interlayer Bond in 3D-Printed Concrete Using Dry-Powder Application of Supplementary Cementitious Materials
38. Qi Pengfei, Zhao Wenhao, Yang Bo, Wang Ziyuan et al. (2026-03)
    GRA-RSM Based Optimization Model for the Mechanical Performance of 3D Printed Basalt Fiber Concrete
39. Shazad Qamar, Abdelmongy Mohamed, Akbar Muhammad, Yosri Ahmed (2026-03)
    Experimental Study on the Role of Defect-Driven Interfaces and Porosity in Governing the Mechanical Behavior of 3D-Printed Concrete
40. Sitong Wang, Wu Chengde (2026-03)
    Biochar-Infused 3D Concrete Printing for Carbon Sequestration
41. Huang Kaisheng, Elchalakani Mohamed, Ran Hongyu, Ayough Pouria et al. (2026-03)
    Improvement of the Self-Sensing Properties of the 3D Printing UHPC Incorporating Conductive Rubber
42. Jin Yuan, Sun Zhaoyang, Chen Mingxu, Zhou Xiangming et al. (2026-03)
    Predicting the Printability of Cementitious Composites in 3D Printing:
    Relevance Between Rheological Protocols and Structural Deformation
43. Zia Syed, Yuan Yong, Irfan ul Hassan Muhammad, Sheng Ruyi et al. (2026-03)
    Influence of Sugarcane Bagasse Ash on the Workability and Mechanical Behaviour of 3D-Printed Mortar
44. Amjad Umar, Irshidat Mohammad, Maurya Muni, Rizmin Khadeejath et al. (2026-03)
    Sustainable 3D Mortar Printing:
    Material Optimization and Ultrasonic Characterization for Enhanced Construction Performance
45. Bai Songlin, Yao Xiaofei, Yang Min, Liu Shilong et al. (2026-03)
    Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing:
    A Case Study of an Irregular Gatehouse
46. Campello Eduardo, Avancini Victor, Quintana-Ruiz Osvaldo (2026-03)
    A DEM-Based Simulation Framework for 3D Concrete Printing with the Discrete Fresh Concrete Model
47. Ekinci Mehmet, Belendir Utku, Demiral Nazim, Şahin Oğuzhan et al. (2026-03)
    Sustainable Lightweight Thermal Insulating Geopolymer Mortars from End-of-Life Materials for 3D Printing.
48. Cheng Shengbo, Grimm Benedikt, Unterreiner Michael, Hechtl Christian et al. (2026-03)
    Properties of the Transition Region in 3D Printed Functionally Graded Concrete Through Near Nozzle Binder-Aggregate Mixing
49. Joda Akram, Mansouri Abraham, Abdullahi Ahmed, Elgaali Elgaali et al. (2026-03)
    Parametric Analysis of Infill Geometry and Density for Thermally Efficient 3D-Printed Concrete
50. Liu Yalin, Fan Weichen, Li Chengze, Wei Ya et al. (2026-03)
    Printability, Mechanical, and Shrinkage Properties of 3D Printing Internally-Cured Ultra-High Performance Concrete
51. Šerelis Evaldas, Vaitkevičius Vitoldas, Korat Bensa Lidija, Serjun Vesna et al. (2026-03)
    Effect of Chemical and Physico-Chemical Activation on the Properties of 3D Printed Concrete with a Low-Cement Multicomponent Binder
52. Wagiri Felicia, Shih Shen, Jauk Julian, Stavric Milena (2026-03)
    Continuous Clay:
    Optimized Toolpaths for 3D-Printed Ceramic Structures Inspired by Weaving Patterns
53. Žižková Nikol, Válek Josef, Vespalec Arnošt, Melichar Jindřich et al. (2026-03)
    Layer Bond Strength in 3D-Printed Concrete:
    The Role of Interlayer Surface Area and Printing Delay Time
54. Zuo Zibo, Huang Yulin, Li Jin, Corte Wouter (2026-03)
    Monitoring Prioritization for On-Site 3D Concrete Printing Based on the Analytic Hierarchy Process
55. Andersen Sebastian, Andersen Thomas, Sigvardsen Nina, Krogh Kasper et al. (2026-03)
    Inferring the Early-Age Young’s Modulus of 3D-Printed Mortar Through Inverse Analysis Using Actual Print Data
56. Chen Chi, Wang Shenglin, Li Xiaoyuan, Yang Dengwei (2026-03)
    Recent Progress and Methodology for the Characterization of Layer-Effects of Extrusion-Based 3D-Printed Concrete
57. Hinge Pawan, Bhagat Rajesh, Nandurkar Bhupesh, Pande Prashant et al. (2026-03)
    Sustainable 3D-Printed Concrete:
    Integrating E-Waste Plastics for Enhanced Printability, Mechanical Strength, and Long-Term Durability Sets
58. Maierdan Yierfan, Seshadri Akul, Jacquet Yohan, Araujo Sabrina et al. (2026-03)
    Programming Earthen Materials’ Shape Retention with Synergistic Biopolymers for 3D Printing
59. Zhao Qiliang, Huang Yuxiang, Wang Bowen, Zhang Qiuchi et al. (2026-03)
    An Integrated Deep Learning Framework for CT-Based Mesoscopic Segmentation and Quantitative Analysis of 3D-Printed Concrete
60. Reißig Silvia, Mechtcherine Viktor (2026-03)
    Assessing and Modeling the Buildability of Cement-Based Materials in the Context of Digital Fabrication
61. Roske Dieter (2026-03)
    A Novel Approach to Additive Manufacturing:
    The Vibration-Modulated 3D Concrete Print Head
62. Wolf Cordula, Pott Ursula, Jansen Daniel, Stephan Dietmar et al. (2026-03)
    Tailored Yield Stress for 3D Printing Using Low-Clinker Cement
63. Hassan Amer, Sabri Sabri, Alomayri Thamer, Sun Li et al. (2026-03)
    Critical Review of Self-Healing Mechanisms in 3D-Printed Concrete:
    Feasibility, Challenges, and Pathways Toward Durable Automated Construction
64. Timm Kim, Villiers Wibke, Zijl Gideon (2026-03)
    3D Concrete Printing in the Waste Hierachy:
    Reduce, Reuse and Recycle
65. Zhu Chao, Li Hairuo, Liu Chao, Zhao Nan et al. (2026-03)
    Freeze-Thaw Resistance of 3D Printed Concrete:
    Comprehensive Evaluation of Material Properties and Printing Parameters
66. Krishnaraja A., Kulanthaivel P., Manoharan Arunkumar, Muthusamy Suresh et al. (2026-03)
    Engineered Cementitious Composites with Nano Calcium Carbonate and Corona Waste Mask Fibers for Sustainable 3D Printing Applications
67. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2026-03)
    Anisotropy of 3D Printed Concrete Strength and Elasticity for a Well-Developed One-Component and Two-Component Concrete Mixture
68. Chai Hua, Bernhard Mathias, Zhi Yefan, Ororbia Maximilian et al. (2026-03)
    Design-to-Fabrication Workflow for 3D Concrete Printed Structures with Embedded Periodic Anticlastic Surfaces
69. Uehara Shoma, Ohshiro Yusei, Shima Kanako, Sakamoto Kazuya et al. (2026-03)
    Evaluation of Static Yield Stress and Buildability of PVA Fiber-Reinforced Mortars for 3D Printing Using a Vane Shear Test
70. Yousaf Arslan, Koç Muammer (2026-03)
    Bio-Inspired 4D Printing of Earthen Soil Composites for Structural Living Wall Applications
71. Alzoubi Y., Muciaccia Giovanni, Ferrara Liberato, Cibelli Antonio et al. (2026-03)
    Numerical Modelling of Interlayer Adhesion in 3D-Printed Concrete with LDPM
72. Chen Baixi, Wang Xianlin, Zhou Haijun, Jiang Sheng et al. (2026-03)
    Uncertainty Propagation in Reinforcement Bond Performance of 3D-Printed Concrete via Generative-Augmented Ensemble Learning
73. Hammad Y., Tittelboom Kim, Wan-Wendner Roman, Vorel J. (2026-03)
    Multiphysics Simulation of Time-Dependent Early-Age Behaviourin 3D Printed Concrete
74. Kim J.-S., Yoo C., Yang Y. (2026-03)
    Microstructural Characterization and Bonding Performance Evaluation of 3D-Printed Concrete-Mortar Composites
75. Rehman Saif, Robens-Radermacher Annika, Unger Jörg, Wolfs Robert (2026-03)
    Assessing Structural Failure in Extrusion-Based 3D Concrete Printing Using a Plasticity Model with Non-Linear Hardening
76. Saeedi Ahmed, Collery David, O'Flaherty Tomas (2026-03)
    The Impact of Coarse Aggregates on the Performance of 3D-Printed Concrete:
    A Comprehensive Review
77. Sheng R., Yuan Y., Zhang J.-Y., Zhang J.-L. (2026-03)
    Optimization of Mixing Time for Printcrete Using a Non-Contact Monitoring System
78. Jia Ru, Huang Xin, Yang Haoran, Yao Weijing et al. (2026-03)
    Based on X-CT and DEM Simulation:
    A Study on Performance Anisotropy and Mechanisms of 3D Printed Concrete
79. Gomez Enrique, Varela Hugo, Barluenga Gonzalo (2026-03)
    Evaluation of Cone-Penetration Test as a Rheology Quality-Control Field-Oriented Test for 3D Printing Cement-Based Systems
80. Hu Zhiheng, Elchalakani Mohamed, Ayough Pouria, Yang Bo et al. (2026-03)
    Determination of Tensile Strength and Fracture Toughness of 3D-Printed Ultra-Lightweight Engineered Cementitious Composites Reinforced with Fibre-Reinforced Polymer Mesh
81. Wu Jie, Huang Bo-Tao, Zhong Zhen, Sanjayan Jay et al. (2026-03)
    Fracture Mechanisms of 3D-Printed Ultra-High-Performance Concrete:
    Pore-Fibre-Interface Synergy
82. Ashok Tanshette Akash, Faisal Zoheb, Huang Jianxin, Puppala Anand (2026-03)
    Durability Evaluation of Soil-Geopolymer Based Composites for 3D Printing Applications in Geotechnical Engineering
83. Dhakal Suvechha, Tiwari Nitin (2026-03)
    Printability and Structural Integrity of Fiber-Reinforced Earth-Based Materials for 3D Printing
84. Kolářová Mária, Kloužková Alexandra, Lauermannová Anna-Marie, Záleská Martina et al. (2026-03)
    Incorporation of Waste Glass Dust with Pigments Containing Cd, S, and Se into Magnesium Oxychloride Cement for Sustainable Production Using 3D Printing
85. Li Haiyan, Luo Aizhong, Zhang Xiaozhong, Ma XiaoMeng et al. (2026-03)
    Optimization of One-Part Alkali-Activated Concrete for Extrusion-Based 3D Printing Through Integrated Performance Evaluation
86. Sun Hou-Qi, Xie Shan-Shan, Zeng Jun-Jie, Zhuge Yan (2026-03)
    3D-Printed Concrete with In-Process Embedded Fiber-Reinforced Polymer Grid Reinforcement
87. Martins Diana, Matos João, Souda Diogo, Almeida Fernando (2026-03)
    COLD:
    Control and Optimization of Layer Deposition in Large-Scale Additive Manufacturing
88. Lunsford Caleb, Spencer Lawson, Shen Dongye, Genedy Moneeb et al. (2026-03)
    Effect of Toolpath Strategies on Anisotropy and Structural Performance of 3D Printed Concrete Gyroid Walls
89. Silvennoinen Heidi, Honic Meliha, Slavkovic Katarina, Block Philippe et al. (2026-03)
    Additive Manufacturing for Circular Construction:
    A Review of Design Strategies and Their Assessment
90. Chen H., Sharma S., Delavar Mohammad, Sideris Petros (2026-03)
    Quantification of Seismic Performance Parameters for Single-Story 3D Printed Concrete Buildings Based on Collapse Criteria