Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention (2024-09)¶
10.24355/dbbs.084-202408021030-0
Zhan Yiyuan, ,
Contribution - Supplementary Proceedings of the 4th RILEM International Conference on Concrete and Digital Fabrication
Abstract
Rheology and stiffening control can contribute in a significant way to the quality of concrete structures in general and can facilitate the promotion of 3D printing technology more specially. Active stiffening control (ASC) has the potential to solve conflicting rheological requirements of 3D printable materials during pumping, extruding and deposition. Responding to an external signal, the rheological properties of cementitious materials with mixed-in responsive com-ponents can be adjusted on demand. However, the mechanical properties of hardened responsive cementitious materials are unclear. This research investigates the mechanical properties of 3D printable cement mortar containing responsive aggregates after being exposed to a magnetic field. A customized nozzle equipped with magnetic intervention is designed. Two different magnetic field strengths (0.1 T and 0.3 T) are applied on the printing nozzle. The com-pressive and flexural strengths of specimens extracted from 3D printed wall elements printed with the help of ASC are explored at 7 days and 28 days. Magnetic field intervention adjusted the rheological properties in time and on de-mand without negatively affecting the mechanical properties after hardening when the responsive aggregates to cement mass ratio was 2.3:1. Compared with the 28-day strength, magnetic intervention has greater influence on the compres-sive and flexural strength at the age of 7 days.
¶
6 References
- Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing - Sanjayan Jay, Jayathilakage Roshan, Rajeev Pathmanathan (2020-11)
Vibration-Induced Active Rheology-Control for 3D Concrete Printing - Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing - Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy - Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
Possibilities and Challenges
0 Citations
BibTeX
@inproceedings{zhan_lesa_schu.2024.MPo3PRCMAMI,
author = "Yiyuan Zhan and Karel Lesage and Geert de Schutter",
title = "Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention",
doi = "10.24355/dbbs.084-202408021030-0",
year = "2024",
booktitle = "Supplementary Proceedings of the 4th RILEM International Conference on Concrete and Digital Fabrication",
editor = "Dirk Lowke and Niklas Freund and David Böhler and Friedrich Herding",
}
Formatted Citation
Y. Zhan, K. Lesage and G. de Schutter, “Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention”, in Supplementary Proceedings of the 4th RILEM International Conference on Concrete and Digital Fabrication, 2024. doi: 10.24355/dbbs.084-202408021030-0.
Zhan, Yiyuan, Karel Lesage, and Geert de Schutter. “Mechanical Properties of 3D Printable Responsive Cement Mortar After Magnetic Intervention”. In Supplementary Proceedings of the 4th RILEM International Conference on Concrete and Digital Fabrication, edited by Dirk Lowke, Niklas Freund, David Böhler, and Friedrich Herding, 2024. https://doi.org/10.24355/dbbs.084-202408021030-0.