2026-04¶

1. Chen Zhengyuan, Yang Shutong, Lan Tian, Yang Tiange (2026-04)
   Evaluation of Interfacial Fracture Resistance and Fracture Anisotropy in 3D-Printed Ultra-High-Performance Concrete:
   Analytical Modelling and Experimental Investigation
2. Kiriparan Balrajh, Sanjayan Jay, Rajeev Pathmanathan (2026-04)
   Establishing Standards for 3D Concrete Printing:
   Current Insights and Future Research Needs
3. Topolář Libor, Pazdera Luboš, Dvořák Karel, Černý Felix et al. (2026-04)
   Acoustic Emission Analysis of Tensile Failure in Layered 3D-Printed Fibre-Reinforced Fine-Grained Concrete
4. Tripathi Avinaya, Nair Sooraj, Rajan Subramaniam, Sant Gaurav et al. (2026-04)
   Deformation-Based Buildability Assessment of 3D Printed Concrete and Its Numerical Simulation
5. Chourasia Ajay, Pal Biswajit, Kapoor Ashish, Kumar R. (2026-04)
   Influence of Mix Constituents on the Printability and Compressive Strength of Binary and Ternary Cementitious Composite Made of Agro-Industrial Waste
6. Lv Liping, He Jing, Chen Jiazhe, Xu Dan et al. (2026-04)
   Integrated Multi-Objective Optimization for Multi-Head Collaborative 3D Concrete Printing via a Trinary-Tree Enhanced Genetic Algorithm
7. Nan Bo, Qiao Youxin, Leng Junjie, Deng Zhengxing et al. (2026-04)
   Structural Performance of 3D Printed Concrete Reinforced with Bidirectional Steel Wire Mesh
8. Saravanan Pradeep, Ramaswamy Ananth (2026-04)
   A Continuum Damage–Cohesive Zone Modeling Framework for Filament and Interlayer Fracture in 3D-Printed Concrete
9. Ali Muhammad, Qian Hui, Umar Muhammad, Wang Puhan et al. (2026-04)
   Flexural Performance of ECC Thin-Plate Reinforced with Shape Memory Alloy Fibre Fabricated by Extrusion-Based 3D-Printing
10. Jamhiri Babak, Buswell Richard, Blanco Ana (2026-04)
    How Homogenous Is Your 3D Printed Concrete?:
    A New Approach to Assessing Anisotropy Using Weibull Statistics
11. Modi Chaman, Kumar Manish, Chopperla Krishna (2026-04)
    In-Process Reinforcement Method for 3D-Printed Concrete Layers
12. Rossin Alessandro, Trento Daniel, Sidhu Amandeep, Letelier-Gonzalez Viviana et al. (2026-04)
    Mechanical and Durability Properties of Extrudable Cob Mixes with Recycled Materials
13. Janghorban Emad, Joshi Arpan, Gaspar Florindo (2026-04)
    Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance
14. Reis Rui, Aroso Francisca, Camões Aires, Brandão Filipe et al. (2026-04)
    Carbonation and Chloride Attack in 3D-Printed Cementitious Materials:
    A Systematic Durability Review
15. Yuan Pu, Wang Xinjie, Huang Jie, Shi Quanbin et al. (2026-04)
    Feasibility, Mechanical Properties, and Environmental Impact of 3D-Printed Mortar Incorporating Recycled Fine Aggregates from Decoration and Renovation Waste
16. Chougule Pranav, Abraham David, Farnam Yaghoob, Ebrahimkhanlou Arvin (2026-04)
    Laser-Based Monitoring of Robotic Carbon Dioxide Injection in Fresh Additively Manufactured Concrete
17. Hussein Abdel, Alshamsi Ali, Mooney Harrison, Mamas Kaliope et al. (2026-04)
    Community-Driven Design of Flood-Resilient Recovery Housing via 3D Concrete Printing
18. Mütevelli Özkan İffet, Aldemir Alper (2026-04)
    Environmental, Structural, and Economic Investigation of 3D-Printed Concrete Buildings with Varying Cross-Sectional Geometries
19. Wang Huai, Li Xiulin, Gong Hao, Wang Peijun et al. (2026-04)
    Thermal and Mechanical Properties of 3D Printed Lightweight Hollow Glass Microsphere Aggregate Concrete
20. Liu Han, Sousa Israel, Doyle Shelby, Alessandro Antonella et al. (2026-04)
    3D-Printed Smart Reinforced Beam for In-Process Monitoring
21. Luo Jintao, Zhang Li, Guan Xuemao, Yao Tianshuai et al. (2026-04)
    Recycling Molybdenum Tailings to Produce Eco-Friendly 3D-Printed Concrete:
    Rheological Properties, Mechanical Evolution and Internal Curing Mechanism
22. Taj Khalilullah, Reid Laraimie, Su Yen-Fang (2026-04)
    Environmental Influence on the Smart Self-Sensing 3D-Printed Concrete Column
23. Yang Xia, Wang Jiuyuan, Zhang Zhenming, Tan Yushuang et al. (2026-04)
    A Comparative Analysis of 3D-Printed Concrete Incorporating Fibers and Fiber Grids:
    Mechanical Properties and Microstructure
24. Guo Hongyuan, Chen Baixi, Lyu Mengze, Bao Xiaohua et al. (2026-04)
    Probabilistic and Global Sensitivity Analysis for 3D Concrete Printing:
    A Point-Evolution and Fréchet-Derivative Framework
25. Xie Fan, Hu Hailong, Deng Yang, Wang Dong et al. (2026-04)
    Development of Heat-Triggered Sulfate Capsule for on-Demand Setting 3D Printing Phosphogypsum-Based Cement
26. Wu Jie, Mi Jiwei, Hua Sudong, Yue Hongfei et al. (2026-04)
    Effects and Mechanisms of Modified Superabsorbent Polymers on Shrinkage Behavior of 3D-Printable Mortar
27. Kumar Sandeep, Dixit Anjaneya (2026-04)
    3D-Printable Concrete Using Stabilized Soil:
    Effect of Binders and Curing Regimes on the Engineering Performance
28. Nayak Anitha, Nayaka Ramesh, Zhang Y. (2026-04)
    Performance Evaluation, Microstructure Behaviour and Life Cycle Assessment of 3D Concrete Printable Ink Containing Recycled Construction Waste
29. Rizzieri Giacomo, Bos Derk, Wolfs Robert, Ferrara Liberato et al. (2026-04)
    A Unified Fluid-Solid Elasto-Viscoplastic Finite Element Model for the Simulation of 3D Concrete Printing Across Process Scales
30. Lemougna Patrick, Cantaluppi Marco, Faleschini Flora, Toska Klajdi et al. (2026-04)
    Mechanical Properties, 3D Printing and Environmental Performance of Ordinary Portland Cement (OPC) Mortars Containing Calcite Rich Residue from Stabilised Basic Oxygen Furnace Slag
31. Lyu Qifeng, Luo Zhenhua, Sun Yuting, Du Qianyi et al. (2026-04)
    Improved Energy Storage of Dual-Concrete Composite Cavity-Structure Supercapacitor Fabricated via Mortar-Extrusion 3D Printing
32. Öztürk Ece, Borgianni Yuri, Ince Ceren (2026-04)
    A Database-Driven Study on Durability and Sustainability of 3D Concrete Printing Mixtures
33. Xia Yuhang, Cao Dongwei (2026-04)
    Optimization of Mix Proportion and Performance Study of 3D-Printed Concrete for Slope Protection
34. Huang Jie, Wang Xinjie, Shi Quanbin, Yuan Pu et al. (2026-04)
    Optimizing the Utilization Rate and Performance of 3D-Printed Mortar with Dual-Size Recycled Sand
35. Ramakrishnan Sayanthan, Ramesh Akilesh, Pasupathy Kirubajiny, Mechtcherine Viktor et al. (2026-04)
    Enhancing the Printability and Sustainability of 3D Concrete Printing Using Recycled Waste Glass as a Cement Substitute
36. Wang Xianfeng, Zheng Junhao, Zhang Xuanzhe, Zhu Guang et al. (2026-04)
    Pickering Emulsion-Based 3D Printing for Efficient Vascular Self-Healing in Cementitious Materials.
37. Cassese Paolino, Menna Costantino, Prota A., Occhiuzzi Antonio (2026-04)
    Experimental Investigation on the Axial Compressive Behavior of 3D-Printed Cementitious Panels with Process-Induced Imperfections
38. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2026-04)
    Failure Mechanisms of 3D Printed Formwork Arches: The Critical Role of Interfacial Bond and Manufacturing Parameters
39. Bradford Katy, Gentry Russell, Kurtis Kimberly (2026-04)
    Embodied Carbon and Energy of Offsite 3D-Printed Concrete Walls
40. Duan Yuhang, Liew Jia, Rabczuk Timon, Liew Kim (2026-04)
    Frictional Contact Modeling Within a Local Strain-Based Peridynamic Framework for Impact-Induced Failure of 3D-Printed Concrete
41. Cadenazzi Thomas, Liu Kaimiao, Keles Busra (2026-04)
    Performance Evaluation of Novel 3D Printed Hemp-PLA Composites for Sustainable Concrete Reinforcement
42. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Valenzuela-Astudillo Eduardo (2026-04)
    Parametric Form-Finding for 3D-Printed Housing:
    A Computational Workflow from Generative Exploration to Architectural Development
43. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2026-04)
    High-Fidelity Finite Element Modelling of Multi-Layer 3D Printing with Complex Toolpaths
44. Azarhomayun Fazel, Alipanahi Pouya, Zeng Hang, Kim Heejeong et al. (2026-04)
    Experimental and Numerical Investigation of Plastic Shrinkage Control in 3D-Printed Concrete Using Natural Zeolite
45. Baghdadi Abtin, Kloft Harald (2026-04)
    Influence of Concrete Printing Techniques and Geometry on Shear-Compressive Capacity of Dry Concrete Joints
46. Mbabazi Justin, Wang Yalun, Luo Zhenhua, Gao Lanqi et al. (2026-04)
    Structural and Functional Performance of 3D-Printed Light-Transmitting Foamed Concrete with Different Cavity Geometries and Fiber Orientations
47. Mostafavi Sina, Motejano-Hernandez Edgar, Bagheri Bahar, Etemadi Ali et al. (2026-04)
    Robotic Concrete 3D Printing Continuous Toolpath Planning:
    From Single Curve to Voxel-Based Systems for Design-to-Production of Urban Furnitures
48. Wang Guosheng, Zhang Ziyi, Tao Junwei, Tian Gang et al. (2026-04)
    Anisotropic Fracture Behavior of PAN Fiber Reinforced 3D Printed Concrete:
    Crack Evolution and Fiber Orientation Toughening Mechanism
49. Akula Pavan, Ray Saswati, Bastola Ashish, Masoomi Maryam et al. (2026-04)
    Suction-Based Framework of 3D-Printed Earthen Materials:
    Linking Geotechnical Properties, Buildability, and Strength
50. Baccaro Arianna, Calà Adriana, Famoso Martina, Santoro Enza (2026-04)
    3D Printing with Recycled Materials:
    A Review on the Viability of Bio-Waste and Stone Waste in Construction Applications
51. Bos Derk, Deetman Arjen, Wolfs Robert (2026-04)
    Correlating in-Line Sensor Data to Hardened State Material Properties in Digital Fabrication with Concrete
52. Elleuch Sourour, Carré Hélène, Borderie Christian (2026-04)
    Adaptation of Low Environmental Impact Mortar Formulations for 3D Printing
53. Li Haodao, Khayat Kamal (2026-04)
    Extrusion-Based 3D Printing of Fiber-Reinforced Concrete
54. Manivannan T., Reddy K., Jaganathan Jayaprakash (2026-04)
    Numerical Analysis of Flexural Behaviour in 3D-Printed Snap-Fit Interlocking Concrete Specimens Incorporating Frictional Interactions
55. Rajkumar P., Reethu D., Shyamala G., Aamri Ahmed et al. (2026-04)
    Advances in Additive Manufacturing for Construction:
    A Scientometric analysis of 3D Printing Research
56. Sangiorgio Valentino, Valeri Manuela, Cantagallo Christina, Guth C. et al. (2026-04)
    Performance and Evolution of Materials for 3D Construction Printing:
    An Overview from Conventional to Extreme Environments
57. Singh S., Aggarwal Anchal (2026-04)
    3D Concrete Printing and Its Role in Modern Construction:
    Concept to Reality
58. Warsi Syed, Panda Biranchi, Biswas Pankaj (2026-04)
    3D Finite Element Analysis on the Effects of Boundary Elements Confinement on Cyclic Performance of 3D Printed Concrete Wall
59. Zhu Pengjia, Tan Hailong, Ma Juntao, Yin Jianguang et al. (2026-04)
    Mix Proportion Design and Performance Regulation of 3D-Printing Phosphogypsum-Based Geopolymer Paste