Skip to content

Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1 (2023-11)

10.1007/978-3-031-31824-5_62

Bui Van-Bien,  Pham Thi, Pham Duc, Do Thi
Contribution - Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development, pp. 535-543

Abstract

The primary challenge for successful 3D concrete printing is the complicated characteristics the materials should own, especially printability. The result and the slump-flow tests probably determine this parameter. Unfortunately, the traditional slump and slump-flow test methods are basically based on length and time measured by a ruler and a stopwatch then the result may reflect error caused by human. We introduce in this research an efficient method for slump and slump-flow test data receiving with Kinect v1. Our approach is based on the non-contact measurement and data processing. After capturing the dynamically changing 3D surface of concrete using a 3D device during the test, the results are processed into a point cloud. The slump flow diameter and height at any location simultaneously can be indicated from this point cloud. Finally, the experimental results show that the efficiency of the proposed method is significantly improved.

5 References

  1. Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
    Hydration- and Rheology-Control of Concrete for Digital Fabrication:
    Potential Admixtures and Cement-Chemistry
  2. Nair Avinash, Aditya S., Adarsh R., Nandan M. et al. (2023-03)
    Additive Manufacturing of Concrete:
    Challenges and Opportunities
  3. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
    Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
  4. Roussel Nicolas (2018-05)
    Rheological Requirements for Printable Concretes
  5. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review

0 Citations

BibTeX 
@inproceedings{bui_pham_pham_do.2023.AEoSaSFTf3CPwtKv,
  author            = "Van-Bien Bui and Thi Loan Pham and Duc An Pham and Thi Thu Thuy Do",
  title             = "Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1",
  doi               = "10.1007/978-3-031-31824-5_62",
  year              = "2023",
  pages             = "535--543",
  booktitle         = "Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development",
  editor            = "Banh Tien Long and Kozo Ishizaki and Hyung Sun Kim and Yun-Hea Kim and Nguyen Duc Toan and Nguyen Thi Hong Minh and Pham Duc An",
}
Formatted Citation

V.-B. Bui, T. L. Pham, D. A. Pham and T. T. T. Do, “Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1”, in Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development, 2023, pp. 535–543. doi: 10.1007/978-3-031-31824-5_62.

Bui, Van-Bien, Thi Loan Pham, Duc An Pham, and Thi Thu Thuy Do. “Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect V1”. In Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development, edited by Banh Tien Long, Kozo Ishizaki, Hyung Sun Kim, Yun-Hea Kim, Nguyen Duc Toan, Nguyen Thi Hong Minh, and Pham Duc An, 535–43, 2023. https://doi.org/10.1007/978-3-031-31824-5_62.