Latest Development of 3D Printing Adopting Recycled Aggregate (2022-10)¶
10.1016/b978-0-323-89838-6.00016-5
,
Contribution - Multi-Functional Concrete with Recycled Aggregates, pp. 307-344
Abstract
Currently, 3D concrete printing (3DCP) has received worldwide attention due to its digital construction advantages including high efficiency and less labor requirement. Meanwhile, the problems of pollution caused by construction and demolition waste (C&D waste) as well as the shortage of river sand have become more and more serious. Therefore, 3D recycled mortar printing, which incorporates recycled fine aggregates into 3D printing, has great advantages on practical applications, which will not only alleviate the pollution from C&D waste and the pressure of shortage on river sand but will also reduce the labor requirement and output of by-products on conventional construction. In this chapter, a printing system, printability of 3D recycled mortar, and its related physical and mechanical properties are mainly introduced, and onsite printing is also carried out.
¶
13 References
- Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
An Automated System for 3D Printing Functionally Graded Concrete-Based Materials - Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages - Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
Hardened Properties of Layered 3D Printed Concrete with Recycled Sand - Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
Classification of Building Systems for Concrete 3D Printing - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
Quantifying Contour-Deviation and Mechanical Properties - Shakor Pshtiwan, Nejadi Shami, Sutjipto Sheila, Paul Gavin et al. (2020-01)
Effects of Deposition-Velocity in the Presence-Absence of E6-Glass-Fiber on Extrusion-Based 3D Printed Mortar - Shakor Pshtiwan, Renneberg Jarred, Nejadi Shami, Paul Gavin (2017-07)
Optimization of Different Concrete Mix Designs for 3D Printing by Utilizing 6DOF Industrial Robot - Tay Yi, Li Mingyang, Tan Ming (2019-04)
Effect of Printing Parameters in 3D Concrete Printing:
Printing Region and Support Structures - Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
Time-Gap-Effect on Bond Strength of 3D Printed Concrete - Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
3D Recycled Mortar Printing:
System-Development, Process-Design, Material-Properties and On-Site-Printing - Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
3 Citations
- Hermida José, Saavedra Ruth, Hidalgo-Astudillo Samantha, Tošić Nikola et al. (2025-06)
Influence of Fine Recycled Aggregates on the Properties of 3D Printing Concrete - Shoaei Parham, Gallantree-Smith Harrison, Martínez Pacheco Victor, Pamies Ramón et al. (2024-06)
Comparative Analysis of 3D Printing of Portland Cement Mortars with Hydroxypropyl-Methylcellulose and Micro-Fibrillated Cellulose as Viscosity-Modifying-Agents - Ahmed Ghafur (2023-01)
A Review of 3D Concrete Printing:
Materials and Process Characterization, Economic Considerations and Environmental Sustainability
BibTeX
@inproceedings{xiao_duan.2023.LDo3PARA,
author = "Jianzhuang Xiao and Zhenhua Duan",
title = "Latest Development of 3D Printing Adopting Recycled Aggregate",
doi = "10.1016/b978-0-323-89838-6.00016-5",
year = "2023",
pages = "307--344",
booktitle = "Multi-Functional Concrete with Recycled Aggregates",
editor = "Yidong Xu",
}
Formatted Citation
J. Xiao and Z. Duan, “Latest Development of 3D Printing Adopting Recycled Aggregate”, in Multi-Functional Concrete with Recycled Aggregates, 2023, pp. 307–344. doi: 10.1016/b978-0-323-89838-6.00016-5.
Xiao, Jianzhuang, and Zhenhua Duan. “Latest Development of 3D Printing Adopting Recycled Aggregate”. In Multi-Functional Concrete with Recycled Aggregates, edited by Yidong Xu, 307–44, 2023. https://doi.org/10.1016/b978-0-323-89838-6.00016-5.