3D Printing Trends in Building and Construction Industry (2017-05)¶
A Review
, , , Mohamed Nisar, ,
Journal Article - Virtual and Physical Prototyping, Vol. 12, Iss. 3, pp. 261-276
Abstract
Three-dimensional (3D) printing (also known as additive manufacturing) is an advanced manufacturing process that can produce complex shape geometries automatically from a 3D computer-aided design model without any tooling, dies and fixtures. This automated manufacturing process has been applied to many diverse fields of industries today due to significant advantages of creating functional prototypes in reasonable build time with less human intervention and minimum material wastage. However, a more recent application of this technology towards the built environment seems to improve our traditional building strategies while reducing the need for human resources, high capital investments and additional formworks. Research interest in employing 3D printing for building and construction has increased exponentially in the past few years. This paper reviews the latest research trends in the discipline by analysing publications from 1997 to 2016. Some recent developments for 3D concrete printing at the Singapore Centre for 3D Printing are also discussed here. Finally, this paper gives a brief description of future work that can be done to improve both the capability and printing quality of the current systems
¶
22 References
- Aejmelaeus-Lindström Johan, Willmann Jan, Tibbits Skylar, Gramazio Fabio et al. (2016-04)
Jammed Architectural Structures:
Towards Large-Scale Reversible Construction - Agustí-Juan Isolda, Habert Guillaume (2016-04)
An Environmental Perspective on Digital Fabrication in Architecture and Construction - Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology - Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
Flow-Based Fabrication:
An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hack Norman, Lauer Willi (2014-04)
Mesh Mould:
Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork - Hwang Dooil, Khoshnevis Behrokh (2004-09)
Concrete Wall Fabrication by Contour Crafting - Hwang Dooil, Khoshnevis Behrokh (2005-11)
An Innovative Construction Process-Contour Crafting (CC) - Keating Steven, Spielberg Nathan, Klein John, Oxman Neri (2014-05)
A Compound Arm Approach to Digital Construction:
A Mobile Large-Scale Platform for On-Site Sensing, Design, and Digital Fabrication - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Kothman Ivo, Faber Niels (2016-09)
How 3D Printing Technology Changes the Rules of the Game:
Insights from the Construction Sector - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
Development of a Viable Concrete Printing Process - Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components - Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
Complex Concrete Structures:
Merging Existing Casting Techniques with Digital Fabrication - Perkins Isaac, Skitmore Martin (2015-03)
Three-Dimensional Printing in the Construction Industry:
A Review - Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry - Zhang Jing, Khoshnevis Behrokh (2012-09)
Optimal Machine Operation Planning for Construction by Contour Crafting
395 Citations
- Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence - Alawadi Fatemah, Murphy Martina, Eadie Robert (2026-01)
Challenges and Solutions for Scalability of Affordable Housing:
A Literature Review on 3D Printed Construction in Kuwait - Norouzi Yasaman, Dixit Manish (2026-01)
A Review of Advantages and Challenges of Using Hempcrete for 3D Printing in Construction - Gil-Lopez Tomas, Amirfiroozkoohi Alireza, Valiente López María, Verdu-Vazquez Maria (2026-01)
The Impact of 3D Printing on Mortar Strength and Flexibility:
A Comparative Analysis of Conventional and Additive Manufacturing Techniques - Gnanaraj Anies, Moreno Leyla, Thabet Reham, Rangel Bárbara et al. (2026-01)
Comparative Analysis of Onsite Versus Offsite 3D Printing in Construction:
Benefits, Challenges, and Case Studies - Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
Evaluating Compressive Strength in 3D-Printed Concrete Structures:
A Comparative Study of ANSYS Simulations and Experimental Data - Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration - Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
A Systematic Review - Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
Large‐Format Additive Manufacturing with Cement and Clays:
Characterization Methods - Ebiloma David, Olatunbosun Olajumoke, Isang Inimbom, Aigbavboa Clinton (2025-11)
Assessing the Effects of 3D-Printed Concrete for Sustainable Construction:
The Stakeholders' Perspective - Khoury Eliane, Cheikh Khadija, Schutter Geert, Cazacliu Bogdan et al. (2025-11)
Using Vacuum Mixing for 3D Printing of Mortars Made with Recycled Sand - Adeel Muhammad (2025-11)
Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
A Comprehensive Review - Givkashi Mohammad (2025-11)
Durability of 3D Printed Concrete Containing Air-Entraining Agent:
Evaluating the Importance of Carbonation Resistance - Silva Neesha, Rajapaksha Upendra, Udawattha Chameera (2025-11)
Tailoring 3D Printing for Personalized Housing:
Selecting the Right Technology for Custom Home Construction - Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
Balancing Printability, Early-Stage Strength, and Eco-Efficiency - Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology - Türk Ayşe, Türk Furkan, Edebali Serpil, Keskin Ülkü (2025-11)
3D Printable Mortars with Green Materials:
Sustainable Solutions with Nanocellulose - Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers - Masri Abdullah, Vazquez Elaine, Haddad Assed, Najjar Mohammed (2025-10)
Life Cycle Costing in 3D Printing:
A Literature Review - Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate - Liu Junli, Zhang Shipeng, Hao Lucen, Wu Bo et al. (2025-10)
Rapid Rheology Control and Stiffening of 3D-Printed Cement Mortar via CO2 Flash Mixing in a 2K Printing System - Ke Zhijiang, Li Zichang, Chen Zhengfei, Xu Yao et al. (2025-10)
Technological Advancements and Challenges of Robotic Arm-Based 3D Printing for Hydraulic Tunnel Lining - Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites - Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
A Review - Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-10)
Adaptive Velocity Compensation for Optimal 3D Concrete Printing in Uncontrolled Environments - Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
Work Breakdown Structure - Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
Recycled Components in 3D Concrete Printing Mixes:
A Review - Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites - Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
Industrial Waste in 3D Printed Concrete:
A Mechanistic Review on Rheological Control and Printability - Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
Current Status and Future Prospects - Murtaza Ghulam, Baldinelli Giorgio (2025-08)
Revolutionizing Architecture:
3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance - Banihashemi Saeed, Akbarnezhad Ali, Sheikhkhoshkar Moslem, Haouzi Hind et al. (2025-08)
3D Printing in Construction:
Sustainable Technology for Building Industry - Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
Influence of Process Parameters on 3D Concrete Printing:
A Step Towards Standardized Approaches - Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
Effect of Cold Joint, Axial Load and Load Type - Geng Shao-bo, Zhang Chen, Zhang Hui, Hai Lu et al. (2025-08)
Upcycling Coal Gangue Coarse Aggregates into 3D Printed Concrete:
Multi-Scale Mechanisms of Fracture Behaviour - Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials - Goel Devansh, Kore Sudarshan (2025-07)
Mapping the Bibliometric Progression of 3D Concrete Printing:
A Concise Review - Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure - Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate - Dong Wei, Zhang Changmin, Wang Junfeng, Zhang Xinjie et al. (2025-07)
Optimal Design of Mix Proportions for 3D Printed Concrete with Ferrochrome Slag and Aeolian Sand - Bajwa Asad, Flemmer Claire, Samarasinghe Don, Bao Ding et al. (2025-07)
Sustainability of 3D Printing Technology:
A Review on Research Trends and Developments - Oseji Samuel, Chukwuemeka Prince, Imoni Okes (2025-06)
Artificial Intelligence in 3D Printed Concrete:
Sustainability Assessment and Implementation Challenges - Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams - Geng Songyuan, Cheng Boyuan, Long Wujian, Luo Qiling et al. (2025-05)
Co-Driven Physics and Machine Learning for Intelligent Control in High-Precision 3D Concrete Printing - Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
A Comprehensive Analysis on Material Properties and Specialized Applications in 3D Concrete Printing - Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing - Mei Shiming, Li Zheng-Wei, He Ben, Song Jiaqi et al. (2025-05)
A Novel Large-Scale 3D Printing Apparatus for Complex Geological Models and Its Application - Liu Qiong, Singh Amardeep, Wang Qiming, Qifeng Lyu (2025-05)
3D-Printed Application in Concretes - Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems - Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
From Printing to Performance:
A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment - Thajeel Marwah, Kopecskó Katalin, Balázs György (2025-04)
Enhancing Printability of 3D Printed Concrete by Using Metakaolin and Silica Fume - Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
Digital Nervi:
Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork - Huang Jianxiang, Wang Caifeng, Jian Shouwei, Tan Hongbo et al. (2025-04)
Feasibility of Applying Attapulgite, Sodium Bentonite and Nano-Silica as a Viscosity Modifier Admixture for 3D Printing of Gypsum-Based Materials - Berawi Mohammed, Sari Mustika, Bakri Helty, Miraj Perdana et al. (2025-04)
3D Printing Technology for Precast Concrete:
A Business Process Perspective from Indonesian Construction Sector - Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing - Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
Advances in Sustainable Additive Manufacturing:
A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions - Latifiilkhechi Leva, Aminbakhsh Saman, Akcay Emre (2025-03)
Investigating the Barriers to the Adoption of 3D Printing Technology in the Turkish Construction Industry - Ramirez Rodriguez Fatima, Pancho Paolo, Sanchez Daniela, Poudel Suman et al. (2025-02)
Design and Development of a Lean Robotic Cell for Concrete 3D Printing - Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement - Sando Mona, Stephan Dietmar (2025-02)
The Role of Mixing Sequence in Shaping the 3D-Printability of Geopolymers - Zhi Yefan, Chai Hua, Teng Teng, Akbarzadeh Masoud (2025-02)
Automated Toolpath Design of 3D Concrete Printing Structural Components - Sangiorgio Valentino, Floris Ignazio, Duran Dayan (2025-01)
Unified Integration Approach for Bridging BIM Model to 3D Construction Printing and Scale Prototyping - Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
Numerical Simulation-Tools for 3D Printing - Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies - Yu Jie, Xu Fengming, Zhang Hanghua, Ye Junhong et al. (2025-01)
Leveraging Incinerator Bottom Ash for Mitigating Early-Age Shrinkage in 3D Printed Engineered Cementitious Composites - Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
A Review - Glotz Theresa, Rasehorn Inken, Petryna Yuri (2024-12)
Mechanical Behavior of Hardened Printed Concrete and the Effect of Cold Joints:
An Experimental Investigation - Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks - Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
Design, Manufacturing, and Performance - Forcael Eric, Medina Moisés, Opazo-Vega Alexander, Moreno Francisco et al. (2024-11)
Additive Manufacturing in the Construction Industry - Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete - Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
The Rise of Aerial Additive Manufacturing in Construction:
A Review of Material Advancements - Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
Sustainability Principles in 3D Concrete Printing:
Analysing Trends, Classifying Strategies, and Future Directions - Vaishali Panneer, Varunkumar P. (2024-11)
Experimental Study on Behavior of Cement Concrete in 3d Printing - Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers - Loaiza Sebastián, Ortiz Albert, Gómez Daniel, García Alvarez José et al. (2024-11)
3D Printing Applied to Building Development Around the World:
A Systematic Literature Review - Zhi Zhenzhen, Guo Yanfei, Qi Huahui, Tan Hongbo et al. (2024-11)
Effect of Alkali-Metal-Sulfates on Hydration Properties of Alpha-Calcium-Sulfate-Hemihydrate for 3D Printing - Zhao Herui, Jiang Quan, Xia Yong, Liu Jian et al. (2024-11)
Microbial-Induced Carbonate Reinforcement for 3D Printed Concrete:
Testing in Printable and Mechanical Strength - Lim Sean, Tan Ming (2024-10)
A Rheological Model for Concrete Additive Manufacturing - Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator - Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
State of the Art of Mechanical Properties of 3D Printed Concrete - Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
Hydration, Shrinkage and Early-Age Performance - Placzek Gerrit, Schwerdtner Patrick (2024-10)
Comparison of Machine- and Performance Specifications of Concrete 3D Printers - Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
3D Constructing:
Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation - Ma Wei, Wang Guosheng, Zhou Yaya, Xu Qinghu et al. (2024-09)
Polyacrylonitrile-Fiber-Reinforced 3D Printed Concrete:
Effects of Fiber Length and Content - Slepicka Martin, Borrmann André (2024-09)
Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction - Lim Sean, Tay Yi, Paul Suvash, Lee Junghyun et al. (2024-09)
Carbon Capture and Sequestration with In-Situ CO2 and Steam Integrated 3D Concrete Printing - Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces - Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
Development of Outdoor Furniture Using 3D Concrete Printing - Wang Xiangyu, Du Liangfen, Liu Zhenbang, Li Mingyang et al. (2024-09)
3D Cementitious Composites Printing with Pretreated Recycled Crumb-Rubber:
Mechanical and Acoustic Insulation Properties - Bharti Mrityunjay, Menon Arun, Santhanam Manu (2024-09)
Non-Linear Behavior Under Compression of Hardened 3D Printed Concrete - Canavarro Cavalcante Tiago, Castrillon Fernandez Letitia, Toledo Filho Romildo, Mendoza Reales Oscar (2024-09)
3D Printable Mortars with Different Recycled Concrete Powders as Fillers - Jarabo Rocío, Fuente González Elena, García Calvo José, Carballosa Pedro et al. (2024-08)
Nano-Crystalline-Cellulose to Reduce Superplasticizer-Demand in 3D Printing of Cementitious Materials - Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
A Review and Bibliometric Analysis - Alotaibi Badr, Ibrahim Shema Abdulsalam, Umar Ibrahim Abdullahi, Awad Abuhussain Mohammed et al. (2024-08)
Assimilation of 3D Printing, Artificial Intelligence and Internet of Things for the Construction of Eco-Friendly Intelligent Homes:
An Explorative Review - Hutyra Adam, Bańkosz Magdalena, Tyliszczak Bożena (2024-08)
Technology for Automated Production of High-Performance Building Compounds for 3D Printing - Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
Preliminary Study - Huang Zili, Yang Weiyi, Verma Rupesh, Nguyen Giang et al. (2024-07)
Application of Adelaide-University-Snapback-Indirect-Tensile-Test on 3D Printed Cement-Based Materials - Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork - Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete - Quah Tan, Tay Yi, Tan Ming, Li King (2024-07)
Evaluation of Extrusion-Methods for 3D Concrete Printing - Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete - Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix - Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites - Seifan Mostafa (2024-06)
Sustainable Three-Dimensional Printing Concrete:
Advances, Challenges, and Future Direction - Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
A Parametric Numerical Modeling Approach - Liu Junli, Haikola Pirjo, Fox Kate, Tran Jonathan (2024-06)
3D Printing of Cementitious Composites with Seashell-Particles:
Mechanical and Microstructural Analysis - Čítek David, Hurtig Karel, Kolísko Jiří, Koteš Peter (2024-06)
Cementitious Material Development for Additive Fabrication - Melter Oto, Čítek David, Hvizdal Ales, Gabriel Michael et al. (2024-06)
Development of a Robotic Fabrication System for Cementitious Materials - Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing - Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing - Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray - Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete - Mohamed Rania, Mohamed Abdelaziz (2024-05)
Exploring the Environmental Benefits of 3D Printing Technology in Concrete Construction:
A Review - An Dong, Zhang Yixia, Yang Chunhui (2024-05)
Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
A Review - Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components - Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
Building a Greener Future:
Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars - Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2024-05)
Strategies Towards Large-Scale 3D Printing Without Size-Constraints - Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wang Yufei et al. (2024-04)
Artificial Intelligence Powered Real-Time Quality Monitoring for Additive Manufacturing in Construction - Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing - Lo Tzu-Hsien, Liu Bosheng (2024-04)
Extruding Dredged-Based Material for Concrete Formwork through Rapid-Liquid-Printing - Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
From Perspective of Modified Maturity-Model - Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
Towards Innovative and Sustainable Buildings:
A Comprehensive Review of 3D Printing in Construction - Calabrese Giuseppe, Hidding Arwin, Bier Henriette (2024-04)
Review of Cementless Materials for 3D Printing of On- and Off-Earth Habitats - Geng Songyuan, Mei Liu, Cheng Boyuan, Luo Qilong et al. (2024-03)
Revolutionizing 3D Concrete Printing:
Leveraging Random-Forest-Model for Precise Printability and Rheological Prediction - Shahid Mursaleen, Sglavo Vincenzo (2024-03)
Binder-Jetting 3D Printing of Binary Cement-Siliceous Sand Mixture - Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing - İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
3D Printable Construction and Demolition Waste-Based Geopolymer:
Investigating the Effects of Additives on Engineering Properties - Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning - Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Li Xuesen et al. (2024-03)
Development of a Novel Extrusion-Device to Improve the Printability of 3D Printable Geopolymer Concrete - Moghayedi Alireza, Mahachi Jeffrey, Lediga Refilwe, Mosiea Tshepang et al. (2024-03)
Revolutionizing Affordable Housing in Africa:
A Comprehensive Technical and Sustainability Study of 3D Printing Technology - Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete - Dams Barrie, Chen Binling, Kaya Yusuf, Orr Lachlan et al. (2024-03)
Fresh Properties and Autonomous Deposition of Pseudoplastic Cementitious Mortars for Aerial Additive Manufacturing - Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials - Sarı Ramazan, Çalışkan Ekrem (2024-03)
Emerging Technologies in Building Construction - Alhussain Ali, Duarte José, Brown Nathan (2024-02)
Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing - Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior - Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
Advancement in Sustainable 3D Concrete Printing:
A Review on Materials, Challenges, and Current Progress in Australia - Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
A Review - Kaya Yusuf, Orr Lachlan, Kocer Basaran, Kovac Mirko (2023-12)
Aerial Repair and Aerial Additive Manufacturing - Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
3D Concrete Printing in Air and Under Water:
A Comparative Study on the Buildability and Inter-Layer Adhesion - Felfili Guimarães Gabriela, Oliveira Marcos, Almeida Martinelli Juliana (2023-12)
Performance-Evaluation of the 3D Printing System Through Fault-Tree-Analysis-Method - Remke Sebastian, Sant Gaurav, Gädt Torben (2023-12)
Investigation of a Hybrid Binder System for Large-Scale 3D Printing - Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar - Bui Van-Bien, Pham Thi, Pham Duc, Do Thi (2023-11)
Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1 - Carbone Carlo, Mohamed Basem (2023-11)
From Analogue to Digital:
Evolution of Building Machines Towards Reforming Production and Customization of Housing - Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing - Imram Ramsha, Rashid Ans, Khan Shoukat, İlcan Hüseyin et al. (2023-10)
Buildability-Analysis on Squared Profile Structure in 3D Concrete Printing - Placzek Gerrit, Schwerdtner Patrick (2023-10)
From Process to System:
A Review on the Implications of Concrete 3D Printing on Project Delivery - Zhou Yi, Althoey Fadi, Alotaibi Badr, Gamil Yaser et al. (2023-10)
An Overview of Recent Advancements in Fiber-Reinforced 3D Printing Concrete - Pan Tinghong, Guo Rongxin, Fu Chaoshu, Ji Xuping et al. (2023-10)
Extrusion-Based 3D Concrete Printing with Different Flow-Direction - Akman Arabella, Sadhu Ayan (2023-10)
Recent Development of 3D Printing Technology in Construction Engineering - Mallikarjuna Balichakra, Hareeswar M., Sharath P. (2023-09)
Applications of Additive Manufacturing in Construction and Building Industries - Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
The State of the Art in Digital Construction of Clay Buildings:
Reviews of Existing Practices and Recommendations for Future Development - Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application - Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-09)
Non-Destructive Tests to Evaluate the Self-Healing Capacity for a 3D Printing ECC Material - Placzek Gerrit, Schwerdtner Patrick (2023-07)
Concrete Additive Manufacturing in Construction:
Integration Based on Component-Related Fabrication-Strategies - Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
An Experimental and Numerical Study - Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials - Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials - Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry - Singh Narinder, Colangelo Francesco, Farina Ilenia (2023-06)
Sustainable Non-Conventional Concrete 3D Printing:
A Review - Liu Junli, Tran Jonathan, Ginigaddara Thusitha, Mendis Priyan (2023-06)
Exploration of Using Graphene Oxide for Strength Enhancement of 3D Printed Cementitious Mortar - Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
Influences of Filament Offset on Mechanical Properties - Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement - Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
A Critical Review - Lin Che, Mattei Gabriele, Cheibas Ina, Du Chaoyu et al. (2023-05)
PneuPrint:
3D Printing on Inflatables - Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
Top Challenges to Widespread 3D Concrete Printing Adoption:
A Review - Mogaji Iseoluwa, Mewomo Modupe, Toyin James (2023-05)
Key Barriers to the Adoption of 3D Printing Innovation in Construction:
A Review of Empirical Studies - Vergara Luis, Pérez Juan, Colorado Henry (2023-05)
3D Printing of Ordinary Portland Cement with Waste-Wood-Derived Biochar Obtained from Gasification - Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
A Critical Review - Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing - Gong Fangyuan, Cheng Xuejiao, Wang Qinghua, Chen Yi et al. (2023-04)
A Review on the Application of 3D Printing Technology in Pavement Maintenance - Salam Mohammad Abdul, Biernacki Joseph (2023-04)
2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology - Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment - Panda Biranchi, Tran Jonathan (2023-03)
Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials - Wang Ziyue, Chen Zixuan, Xiao Jianzhuang, Ding Tao (2023-03)
Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar - Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete - Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings - Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete - Jesus Manuel, Guimarães Ana, Rangel Bárbara, Alves Jorge (2023-02)
The Potential of 3D Printing in Building Pathology:
Rehabilitation of Cultural Heritage - Pan Zuanfeng, Si Doudou, Tao Jinghong, Xiao Jianzhuang (2023-02)
Compressive Behavior of 3D Printed Concrete with Different Printing Paths and Concrete Ages - Waqar Ahsan, Othman Idris, Pomares Juan (2023-02)
Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling - Beersaerts Glenn, Hertel Tobias, Lucas Sandra, Pontikes Yiannis (2023-02)
Promoting the Use of Fe-Rich Slag in Construction:
Development of a Hybrid Binder for 3D Printing - Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
A Review - Wang Yuxin, Aslani Farhad, Dyskin Arcady, Pasternak Elena (2023-01)
Digital Twin Applications in 3D Concrete Printing - Kosson Michael, Brown Lesa, Sanchez Florence (2023-01)
Nano-Mechanical Characterization of 3D Printed Cement-Pastes - Ahmed Ghafur (2023-01)
A Review of 3D Concrete Printing:
Materials and Process Characterization, Economic Considerations and Environmental Sustainability - Bello Nicholas, Memari Ali (2022-12)
Comparative Review of the Technology and Case Studies of 3D Concrete Printing of Buildings by Several Companies - Peng Yiming, Unluer Cise (2022-12)
Development of Alternative Cementitious Binders for 3D Printing Applications:
A Critical Review of Progress, Advantages and Challenges - Boddepalli Uday, Gandhi Indu, Panda Biranchi (2022-12)
Stability of Three-Dimensional Printable Foam-Concrete as Function of Surfactant Characteristics - İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols - Rech Arianna, Chiujdea Ruxandra-Stefania, Colmo Claudia, Rossi Gabriella et al. (2022-11)
Waste-Based Biopolymer-Slurry for 3D Printing Targeting Construction Elements - Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
Prospect and Barrier of 3D Concrete:
A Systematic Review - Liu Kewei, Meng Qingfei, Kong Qingzhao, Zhang Xihong (2022-11)
Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
Experimental and Numerical Approaches - Li Shuai, Nguyen-Xuan Hung, Tran Jonathan (2022-11)
Digital Design and Parametric Study of 3D Concrete Printing on Non-Planar Surfaces - Tay Yi, Ting Guan, Panda Biranchi, Wong Teck et al. (2022-11)
Towards Net-Zero in 3DP for Building & Construction - Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
3D Printed Geopolymer Composites:
A Review - Dey Dhrutiman, Panda Biranchi (2022-10)
An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs - Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
Aerial Additive Manufacturing with Multiple Autonomous Robots - Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
Rheology and Printability of Portland-Cement-Based Materials:
A Review - He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
An Experimental and Theoretical Investigation - Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing - Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
3D Printing Technologies in Architectural Design and Construction:
A Systematic Literature Review - Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete - Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite - Khosravani Mohammad, Haghighi Azadeh (2022-08)
Large-Scale Automated Additive Construction:
Overview, Robotic Solutions, Sustainability, and Future Prospect - Liu Junli, Setunge Sujeeva, Tran Jonathan (2022-07)
3D Concrete Printing with Cement-Coated Recycled Crumb Rubber:
Compressive and Microstructural Properties - Inaty Francois, Baz Bilal, Aouad Georges (2022-07)
Long-Term Durability-Assessment of 3D Printed Concrete - Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar? - He Chuan, Zhang Shiyu, Liang Youwang, Ahmad Waqas et al. (2022-07)
A Scientometric Review on Mapping Research Knowledge for 3D Printing Concrete - Lin Alexander, Goel Abhimanyu, Wong De, Yeo Charlene et al. (2022-07)
Compressive Load-Dominated Concrete Structures for Customized 3D Printing Fabrication - Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
A Review of Large-Scale 3DCP:
Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies - Oke Ayodeji, Atofarati John, Bello Sherifat (2022-06)
Awareness of 3D Printing for Sustainable Construction in an Emerging Economy - Mohammad Abdul, Biernacki Joseph (2022-06)
2D Stationary Computational Printing of Cement-Based Pastes - Flatt Robert, Wangler Timothy (2022-05)
On Sustainability and Digital Fabrication with Concrete - Elistratkin Michail, Alfimova Nataliya, Podgorniy Daniil, Olisov Andrey et al. (2022-05)
Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing - Won Daeyoun, Hwang Bon-Gang, Chi Seokho, Kor Ju (2022-05)
Adoption of Three-Dimensional Printing Technology in Public Housing in Singapore:
Drivers, Challenges, and Strategies - Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters - Ignatova Elena, Kirichek Pavel (2022-04)
Additive Manufacturing Based on Building Information-Model-Data - Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate - Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
Technology Readiness:
A Global Snapshot of 3D Concrete Printing and the Frontiers for Development - Ulubeyli Serdar (2022-03)
Lunar Shelter Construction Issues:
The State of the Art Towards 3D Printing Technologies - Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
Experimental and Numerical Studies - Ranjan Rajeev, Kumar Deepak, Kundu Manoj, Chandra Moi Subhash (2022-03)
A Critical Review on Classification of Materials Used in 3D Printing Process - Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
A Chemical Process Engineering Look at Digital Concrete Processes:
Critical Step Design, In-Line Mixing, and Scale-Up - Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
3D Concrete Printing Modelling of Thin-Walled Structures - Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters - Manhanpally Najeeb, Saha Suman (2022-03)
Benefit-Cost Analysis of 3D Printed Concrete Building - Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
A Critical Review of 3D Printing in Construction:
Benefits, Challenges, and Risks - Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials - Nguyen-Van Sy, Gwak Kwan-Woong (2022-03)
A Two-Nozzle Cable-Driven Parallel Robot for 3D Printing Building Construction:
Path-Optimization and Vibration Analysis - Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
Recent Developments and Challenges of 3D Printed Construction:
A Review of Research Fronts - Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering - Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
A Review on Recent Progresses - Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition - Ji Guangchao, Xiao Jianzhuang, Zhi Peng, Wu Yuching et al. (2022-02)
Effects of Extrusion-Parameters on Properties of 3D Printing Concrete with Coarse Aggregates - Ting Guan, Quah Tan, Lim Jian, Tay Yi et al. (2022-01)
Extrudable Region Parametrical Study of 3D Printable Concrete Using Recycled-Glass Concrete - Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
Mixture Design and Mechanical Properties - Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
3D Printable Alkali-Activated Concretes for Building Applications:
A Critical Review - Liu Junli, Li Shuai, Fox Kate, Tran Jonathan (2021-12)
3D Concrete Printing of Bio-Inspired Bouligand Structure:
A Study on Impact-Resistance - Stidwell Samuel, Kreiger Eric (2021-12)
Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation - Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing - Ramyar Elham, Cusatis Gianluca (2021-11)
Discrete Fresh Concrete-Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete-Flow - Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
Additive Manufacturing on Building Construction - Nair Sooraj, Neithalath Narayanan (2021-11)
Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry - Xu Zhen, Song Tao, Guo Shuai, Peng Jiangtao et al. (2021-10)
Robotics Technologies Aided for 3D Printing in Construction:
A Review - Sesetti Harika, Lalithya Muthina, Kumar Pala (2021-10)
3D Concrete Printing in Construction Industry:
A State of the Art - Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces - Hou Shaodan, Xiao Jianzhuang, Duan Zhenhua, Ma Guowei (2021-10)
Fresh Properties of 3D Printed Mortar with Recycled Powder - Uribe-Pinzon Sebastian, Mosquera Mariana, Cardenas-Pulido Jhon, Higuera Camilo (2021-10)
Advances and Current Trends on the Use of 3D Printed Concrete for Building Fabrication - Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture - Umar Tariq (2021-08)
Key Factors Influencing the Implementation of Three-Dimensional Printing in Construction - Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials - Babbar Atul, Rai Aryan, Sharma Ankit (2021-08)
Latest Trend in Building Construction:
Three-Dimensional Printing - Guimarães Ana, Delgado João, Lucas Sandra (2021-07)
Advanced Manufacturing in Civil Engineering - Leite Gabriela, Fontana Marcele (2021-07)
Additive Manufacturing and the Evolution of the Construction Industry:
A Systematic Literature Review 2015-2021 - Ko Chien-Ho (2021-06)
Constraints and Limitations of Concrete 3D Printing in Architecture - Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing - Prasittisopin Lapyote, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi (2021-06)
Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion - Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
Large-Scale 3D Printing Concrete Technology:
Current Status and Future Opportunities - Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
Additive Manufacturing in Construction:
A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing - Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
Printability and Direction-Dependent Mechanical Performance - Pan Yifan, Zhang Yulu, Zhang Dakang, Song Yuying (2021-05)
3D Printing in Construction:
State of the Art and Applications - Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete - Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-04)
Importance and Potential of Cellulosic Materials and Derivatives in Extrusion-Based 3D Concrete Printing:
Prospects and Challenges - Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2021-04)
Framework for Technical Specifications of 3D Concrete Printers - Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications - Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
Additive Manufacturing in the Construction Industry:
The Comparative Competitiveness of 3D Concrete Printing - Ning Xin, Liu Tong, Wu Chunlin, Wang Chao (2021-04)
3D Printing in Construction:
Current Status, Implementation Hindrances, and Development Agenda - Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material - Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments - Teixeira João, Schaefer Cecília, Rangel Bárbara, Alves Jorge et al. (2021-03)
Development of 3D Printing Sustainable Mortars Based on a Bibliometric Analysis - Cui Peng, Wu Chun-ran, Chen Jie, Luo Fuming et al. (2021-02)
Preparation of Magnesium-Oxysulfate Cement as a 3D Printing Material - Besklubova Svetlana, Skibniewski Mirosław, Zhang Xueqing (2021-02)
Factors Affecting 3D Printing Technology Adaptation in Construction - Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
3D Printing in the Construction Industry:
A Systematic Review of the Thermal Performance in Buildings - Krishnaraja A., Guru K. (2021-02)
3D Printing Concrete:
A Review - Ramadany Mohamed, Bajjou Mohamed (2021-01)
Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
A Case Study - Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
3D Printing System for Earth-Based Construction:
Case Study of Cob - Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
Improving Performance of Additive Manufactured Concrete:
A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods - Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
Biomimicry for 3D Concrete Printing:
A Review and Perspective - Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications - Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
A Review of 3D Printed Concrete:
Performance-Requirements, Testing Measurements and Mix-Design - Antoni Antoni, Widjaya David, Wibowo Alexander, Chandra Jimmy et al. (2020-12)
Using Calcium Oxide and Accelerator to Control the Initial Setting-Time of Mortar in 3D Concrete Printing - Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
Reinforcing Digitally Fabricated Concrete:
A Systems Approach Review - Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2020-10)
A Systematic Review of the Geographic and Chronological Distributions of 3D Concrete Printers from 1997 to 2020 - Craveiro Flávio, Bártolo Helena, Duarte José, Bartolo Paulo (2020-10)
A Multi-Material Extrusion-Nozzle for Functionally-Graded Concrete Printing - Hossain Md., Zhumabekova Altynay, Paul Suvash, Kim Jong (2020-10)
A Review of 3D Printing in Construction and Its Impact on the Labor Market - Kruger Jacques, Zijl Gideon (2020-10)
A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication - Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing - Šavija Branko (2020-09)
Use of 3D Printing to Create Multi-Functional Cementitious Composites:
Review, Challenges and Opportunities - Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
Plastic Shrinkage Cracking in 3D Printed Concrete - Claßen Martin, Claßen Johannes, Sharma Rahul (2020-08)
Conception of a Real World 3D Printing Method for Reinforced Concrete (AMoRC) - He Rui, Li Mingkai, Gan Vincent, Ma Jun (2020-08)
BIM-Enabled Computerized Design and Digital Fabrication of Industrialized Buildings:
A Case Study - Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials - Rashid Ans, Khan Shoukat, Ghamdi Sami, Koç Muammer (2020-06)
Additive Manufacturing:
Technology, Applications, Markets, and Opportunities for the Built Environment - Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
Quantifying Contour-Deviation and Mechanical Properties - Rehman Atta, Lee Sang-Min, Kim Jung-Hoon (2020-06)
Use of Municipal Solid-Waste Incineration-Ash in 3D Printable Concrete - Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
Additive Manufacturing of Reinforced Concrete:
Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement - Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry - Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing - Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
Setting-on-Demand for Digital Concrete:
Principles, Measurements, Chemistry, Validation - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
Mechanical Behavior of Printed Strain-Hardening Cementitious Composites - He Yawen, Zhang Yamei, Zhang Chao, Zhou Hongyu (2020-05)
Energy-Saving-Potential of 3D Printed Concrete Building with Integrated Living Wall - Allouzi Rawan, Azhari Wael, Allouzi Rabab (2020-05)
Conventional Construction and 3D Printing:
A Comparison Study on Material-Cost in Jordan - Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
Additive Manufacturing of Cantilever:
From Masonry to Concrete 3D Printing - Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete - Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
A Real-Scale Architectural Demonstrator - Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
Nailing of Layers:
A Promising Way to Reinforce Concrete 3D Printing Structures - Özalp Fatih, Yılmaz Halit (2020-03)
Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications - Rahul Attupurathu, Santhanam Manu (2020-02)
Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates - Grigoryan Erik, Semenova M. (2020-02)
Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles - Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
An Automated System for 3D Printing Functionally Graded Concrete-Based Materials - Alkhalidi Ammar, Hatuqay Dina (2020-02)
Energy Efficient 3D Printed Buildings:
Material and Techniques Selection Worldwide Study - Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
Functionally Graded Concrete:
Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements - Ahmed Zeeshan, Bos Freek, Brunschot Maikel, Salet Theo (2020-02)
On-Demand Additive Manufacturing of Functionally Graded Concrete - Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control - Akulova I., Slavcheva Galina (2020-02)
Methodical Approach to Calculation of the Maintenance Cost for 3D Built Printing Equipment - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing - Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites - Shakor Pshtiwan, Nejadi Shami, Sutjipto Sheila, Paul Gavin et al. (2020-01)
Effects of Deposition-Velocity in the Presence-Absence of E6-Glass-Fiber on Extrusion-Based 3D Printed Mortar - Vantyghem Gieljan, Corte Wouter, Shakour Emad, Amir Oded (2020-01)
3D Printing of a Post-Tensioned Concrete Girder Designed by Topology-Optimization - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing - Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
3D Printed Concrete:
Applications, Performance, and Challenges - Grigoryan Erik, Babanina Anna, Kulakov Kirill (2019-12)
Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles - Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Sanjayan Jay (2019-12)
Dimensional Accuracy, Flowability, Wettability, and Porosity in Inkjet 3DP for Gypsum and Cement Mortar Materials - Gradeci Klodian, Labonnote Nathalie (2019-11)
On the Potential of Integrating Building Information Modelling for the Additive Manufacturing of Concrete Structures - Tiryaki Mehmet, Zhang Xu, Pham Quang-Cuong (2019-11)
Printing-While-Moving:
A New Paradigm for Large-Scale Robotic 3D Printing - Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods - Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
Additive Manufacturing in Construction:
A Review on Processes, Applications, and Digital Planning Methods - Yeon Jaeheum (2019-10)
Short-Term Deformability of Three-Dimensional Printable EVA-Modified Cementitious Mortars - Shen Hongyao, Pan Lingnan, Qian Jun (2019-10)
Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology - Panda Biranchi, Mohamed Nisar, Tan Ming (2019-09)
Rheology and Structural Rebuilding of One-Part Geopolymer Mortar in the Context of 3D Concrete Printing - Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
Extrusion-Based Additive Manufacturing of Concrete Products:
Revolutionizing and Remodeling the Construction Industry - Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing - Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication - Meng Xiangcheng, Zhang Xueqing (2019-07)
Case-Study-Analysis for Development-Strategies of Construction 3D Printing - Sakka Fatima, Assaad Joseph, Hamzeh Farook, Nakhoul Charbel (2019-07)
Thixotropy and Interfacial Bond Strengths of Polymer-Modified Printed Mortars - Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete - Davila Delgado Juan, Oyedele Lukumon, Ajayi Anuoluwapo, Akanbi Lukman et al. (2019-07)
Robotics and Automated Systems in Construction:
Understanding Industry-Specific Challenges for Adoption - Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
Processing of Cementitious Materials for 3D Concrete Printing - Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
Additive Manufacturing Processes for Infrastructure Construction:
A Review - Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
Digital Concrete:
A Review - Wolfs Robert, Bos Freek, Salet Theo (2019-06)
Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing - Tay Yi, Qian Ye, Tan Ming (2019-05)
Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test - Hamidi Fatemeh, Aslani Farhad (2019-05)
Additive Manufacturing of Cementitious Composites:
Materials, Methods, Potentials, and Challenge - Grassi Giulia, Lupica Spagnolo Sonia, Paoletti Ingrid (2019-05)
Fabrication and Durability Testing of a 3D Printed Façade for Desert Climates - Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle - Diggs-McGee Brandy, Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
Print Time vs. Elapsed Time:
A Temporal Analysis of a Continuous Printing Operation for Additive Constructed Concrete - Geneidy Omar, Ismaeel Walaa, Abbas Ayman (2019-04)
A Critical Review for Applying Three-Dimensional Concrete Wall Printing Technology in Egypt - Lee Dongyoun, Kim Hakmin, Sim Joonhyeok, Lee Dongmin et al. (2019-04)
Trends in 3D Printing Technology for Construction Automation Using Text Mining - Tay Yi, Li Mingyang, Tan Ming (2019-04)
Effect of Printing Parameters in 3D Concrete Printing:
Printing Region and Support Structures - Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
Utilization of Recycled Glass for 3D Concrete Printing:
Rheological and Mechanical Properties - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
An Approach to Develop Printable Strain-Hardening Cementitious Composites - Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing - Panda Biranchi, Lim Jian, Tan Ming (2019-02)
Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction - Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry - Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures - Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay - Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction - Huang Tiancheng, Gu Hai, Zhang Jie, Li Bin et al. (2018-11)
An Improved Multi-Relaxation Time Lattice Boltzmann Method for the Non-Newtonian Influence of the Yielding Fluid Flow in Cement-3D Printing - Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing - Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements - Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids - Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
Bond Strength in 3D Printed Geopolymer Mortar - Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures - Yu Jing, Leung Christopher (2018-09)
Impact of 3D Printing-Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC) - Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
Large-Scale 3D Printing by a Team of Mobile Robots - Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
Time-Gap-Effect on Bond Strength of 3D Printed Concrete - Wolfs Robert, Bos Freek, Salet Theo (2018-06)
Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete - Panda Biranchi, Tay Yi, Paul Suvash, Tan Ming (2018-05)
Current Challenges and Future Potential of 3D Concrete Printing - Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement - Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material - Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
An Experimental Investigation - Tay Yi, Ting Guan, Panda Biranchi, He Lewei et al. (2018-05)
Bond Strength of 3D Printed Concrete - Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing - Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing - Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
A Review of 3D Concrete Printing Systems and Materials Properties:
Current Status and Future Research Prospects - Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer - Chua Chee, Yeong Wai, An Jia (2018-04)
Special Issue:
NextGen Materials for 3D Printing - Soltan Daniel, Li Victor (2018-03)
A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing - Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology - Panda Biranchi, Tan Ming (2018-03)
Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing - Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
Additive Manufacturing (3D Printing):
A Review of Materials, Methods, Applications and Challenges - Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells - Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach - Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete - Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar - Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
Additive Manufacturing of Geopolymer for Sustainable Built Environment - Lao Wenxin, Li Mingyang, Masia Lorenzo, Tan Ming (2017-08)
Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design - Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material - Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
Automation of Robotic Concrete Printing Using Feedback-Control-System
BibTeX
@article{tay_pand_paul_moha.2017.3PTiBaCI,
author = "Yi Wei Daniel Tay and Biranchi Narayan Panda and Suvash Chandra Paul and Nisar Ahamed Noor Mohamed and Ming Jen Tan and Kah Fai Leong",
title = "3D Printing Trends in Building and Construction Industry: A Review",
doi = "10.1080/17452759.2017.1326724",
year = "2017",
journal = "Virtual and Physical Prototyping",
volume = "12",
number = "3",
pages = "261--276",
}
Formatted Citation
Y. W. D. Tay, B. N. Panda, S. C. Paul, N. A. N. Mohamed, M. J. Tan and K. F. Leong, “3D Printing Trends in Building and Construction Industry: A Review”, Virtual and Physical Prototyping, vol. 12, no. 3, pp. 261–276, 2017, doi: 10.1080/17452759.2017.1326724.
Tay, Yi Wei Daniel, Biranchi Narayan Panda, Suvash Chandra Paul, Nisar Ahamed Noor Mohamed, Ming Jen Tan, and Kah Fai Leong. “3D Printing Trends in Building and Construction Industry: A Review”. Virtual and Physical Prototyping 12, no. 3 (2017): 261–76. https://doi.org/10.1080/17452759.2017.1326724.