Skip to content

Evaluation of Extrusion-Methods for 3D Concrete Printing (2024-07)

10.1007/978-3-031-64269-2_34

 Quah Tan,  Tay Yi,  Tan Ming,  Li King
Contribution - Construction 3D Printing, pp. 281-288

Abstract

3D concrete printing is an additive manufacturing technique that builds a solid part in a layer-by-layer process. To fabricate a highly complex structure, precise control of the flow rate and start-stop dispensing of material on demand is required. The preparation and delivery of material are different for different extrusion methods which cause the deviation in the printed filament. Accumulation of inaccurate deposition and fluctuation of flow rate can lead to wrong dimensions or eventually failure of the printed structure. In this paper, the effects of extruded material for different extrusion methods were evaluated. It was observed that each printing methods have its advantages and selecting of extrusion method should depend on the applications and materials.

5 References

  1. Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
    Mega-Scale Fabrication by Contour Crafting
  2. Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
    3D Concrete Printing:
    Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups
  3. Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
    Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar
  4. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
    Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
  5. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review

0 Citations

BibTeX 
@inproceedings{quah_tay_tan_li.2024.EoEMf3CP,
  author            = "Tan Kai Noel Quah and Yi Wei Daniel Tay and Ming Jen Tan and King Ho Holden Li",
  title             = "Evaluation of Extrusion-Methods for 3D Concrete Printing",
  doi               = "10.1007/978-3-031-64269-2_34",
  year              = "2024",
  pages             = "281--288",
  booktitle         = "Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference",
  editor            = "Ming Jen Tan and Mingyang Li and Yi Wei Daniel Tay and Teck Neng Wong and Paulo Jorge Bartolo",
}
Formatted Citation

T. K. N. Quah, Y. W. D. Tay, M. J. Tan and K. H. H. Li, “Evaluation of Extrusion-Methods for 3D Concrete Printing”, in Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference, 2024, pp. 281–288. doi: 10.1007/978-3-031-64269-2_34.

Quah, Tan Kai Noel, Yi Wei Daniel Tay, Ming Jen Tan, and King Ho Holden Li. “Evaluation of Extrusion-Methods for 3D Concrete Printing”. In Construction 3D Printing: Selected Papers from the 4th International Conference on 3D Construction Printing Conference, edited by Ming Jen Tan, Mingyang Li, Yi Wei Daniel Tay, Teck Neng Wong, and Paulo Jorge Bartolo, 281–88, 2024. https://doi.org/10.1007/978-3-031-64269-2_34.