Structural Health Monitoring for 3D Printed Civil Infrastructures (2024-08)¶
,
Journal Article - Smart Materials and Structures
Abstract
The integration of 3D printed constructions into civil projects has created new opportunities for economically efficient construction. However, preserving the long-term structural integrity of 3D-printed structures poses considerable challenges. This study covers the importance of SHM and deployment of sensors for condition monitoring of 3D-printed civil infrastructure. It explores a wide range of sensors that might be used for continual evaluation and assessment of structural efficiency and the challenges related to SHM in these components. The report provides cost benefit analysis and case studies describing effective sensor installations in 3D-printed structures, demonstrating the ability of the technology to enhance the safety and integrity of infrastructure systems. It also identifies potential challenges and issues that must be resolved before sensor-based SHM can be successfully used in 3D-printed civil structures. The research emphasizes the potential of maintenance planning and decision support systems for optimizing maintenance schedules, reducing downtime, and increasing cost-effectiveness. This research is critical for academics, engineers, and professionals using sensors for 3D-printed structural systems.
¶
24 References
- Akman Arabella, Sadhu Ayan (2023-10)
Recent Development of 3D Printing Technology in Construction Engineering - Akulova I., Slavcheva Galina (2020-02)
Methodical Approach to Calculation of the Maintenance Cost for 3D Built Printing Equipment - Atkinson Cynthia, Aslani Farhad (2023-03)
Performance of 3D Printed Columns Using Self-Sensing Cementitious Composites - Bazli Milad, Ashrafi Hamed, Rajabipour Ali, Kutay Cat (2023-02)
3D Printing for Remote Housing:
Benefits and Challenges - Bedarf Patrick, Dutto Alessandro, Zanini Michele, Dillenburger Benjamin (2021-08)
Foam 3D Printing for Construction:
A Review of Applications, Materials, and Processes - Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing - Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
Mechanical Properties of Structures 3D Printed with Cementitious Powders - Ghaffar Seyed, Corker Jorge, Fan Mizi (2018-05)
Additive Manufacturing Technology and Its Implementation in Construction as an Eco-Innovative Solution - Hager Izabela, Golonka Anna, Putanowicz Roman (2016-08)
3D Printing of Buildings and Building Components as the Future of Sustainable Construction? - Hamidi Fatemeh, Aslani Farhad (2019-05)
Additive Manufacturing of Cementitious Composites:
Materials, Methods, Potentials, and Challenge - Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
A Review of 3D Printed Concrete:
Performance-Requirements, Testing Measurements and Mix-Design - Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers - Ma Guowei, Li Yanfeng, Wang Li, Zhang Junfei et al. (2020-01)
Real-Time Quantification of Fresh and Hardened Mechanical Property for 3D Printing Material by Intellectualization with Piezoelectric Transducers - Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
Additive Manufacturing (3D Printing):
A Review of Materials, Methods, Applications and Challenges - Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
A Review of 3D Concrete Printing Systems and Materials Properties:
Current Status and Future Research Prospects - Perkins Isaac, Skitmore Martin (2015-03)
Three-Dimensional Printing in the Construction Industry:
A Review - Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
3D Printing with Cementitious Materials:
Challenges and Opportunities for the Construction Sector - Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
Design of a 3D Printed Concrete Bridge by Testing - Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
3D Printed Concrete for Large-Scale Buildings:
An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects - Wang Lining, Aslani Farhad, Mukherjee Abhijit (2022-04)
Development of 3D Printable Self-Sensing Cementitious Composites - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry - Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor - Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
Large-Scale 3D Printing by a Team of Mobile Robots
BibTeX
@article{pari_moha.2024.SHMf3PCI,
author = "Lukesh Parida and Sumedha Moharana",
title = "Structural Health Monitoring for 3D Printed Civil Infrastructures: A Review of Challenges, Applications and Future Directions",
doi = "10.1088/1361-665x/ad754f",
year = "2024",
journal = "Smart Materials and Structures",
}
Formatted Citation
L. Parida and S. Moharana, “Structural Health Monitoring for 3D Printed Civil Infrastructures: A Review of Challenges, Applications and Future Directions”, Smart Materials and Structures, 2024, doi: 10.1088/1361-665x/ad754f.
Parida, Lukesh, and Sumedha Moharana. “Structural Health Monitoring for 3D Printed Civil Infrastructures: A Review of Challenges, Applications and Future Directions”. Smart Materials and Structures, 2024. https://doi.org/10.1088/1361-665x/ad754f.