Additive Manufacturing of Geopolymer for Sustainable Built Environment (2017-08)¶
, , , ,
Journal Article - Journal of Cleaner Production, Vol. 167, pp. 281-288
Abstract
This paper evaluates the potential of fly ash based geopolymer cement for large scale additive manufacturing (AM) of construction elements. Geopolymer is considered as a green construction material and its use in AM may contribute towards sustainable environment since in AM process material is only deposited whereby it is necessary. As part of this research, an industrial robot was employed to print geopolymer mortar in layer-by-layer manner directly from 3D computer-aided design (CAD) model. The characteristic of raw materials and fresh properties were examined by rheology, x-ray diffraction (XRD), and scanning electron microscopy (SEM). Mechanical tests such as compression, flexural and tensile bond strength were conducted on the printed geopolymer in different printing directions and their performance was compared with casted samples. It was found, from the experimental results, that the mechanical properties of 3D printed geopolymer are mostly dependent of loading directions due to anisotropic nature of the printing process and retains intrinsic performance of the material.
¶
19 References
- Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
3D Printing Concrete with Reinforcement - Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
Additive Manufacturing of Concrete in Construction:
Potentials and Challenges of 3D Concrete Printing - Choi Myoungsung, Park Kyoungsoo, Oh Taekeun (2016-06)
Viscoelastic Properties of Fresh Cement-Paste to Study the Flow Behavior - Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
Mechanical Properties of Structures 3D Printed with Cementitious Powders - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Hambach Manuel, Volkmer Dirk (2017-02)
Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material - Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques - Rushing Todd, Chaar Ghassan, Eick Brian, Burroughs Jedadiah et al. (2017-01)
Investigation of Concrete Mixtures for Additive Construction - Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
3D Concrete Printing:
A Structural Engineering Perspective - Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
3D Printing Trends in Building and Construction Industry:
A Review - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry
283 Citations
- Liu Xingzi, Buswell Richard, Cavalaro Sergio, Xu Jie et al. (2026-01)
Influence of Inter-Filament Voids on the Failure Mechanism and Compressive Strength of 3D Printed Concrete - Agegn Adamu, Regassa Yohannes, Angassa Kenatu, Mekonnen Kebede (2026-01)
Systematic Review on 3D Concrete Printing Technology:
Breakthroughs and Challenges - Tushar Fazlul, Hasan Mehedi, Hasan Kamrul, Mawa Jannatul et al. (2026-01)
Factors Affecting Flowability and Rheological Behavior of 3D Printed Concrete:
A Comprehensive Review - Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
Next-Generation Green Construction:
3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency - Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance - Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
Printability, Mechanics, and Shrinkage - Alnaggar Mohammed (2025-12)
Large Format Additive Manufacturing with Cementitious and Geo Materials:
General Considerations, Drivers, and Context - Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments - Hasan Md, Xu Jie, Uddin Md (2025-11)
A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
Fresh Properties, Mechanical Performance, and Current Limitations - Assi Lateef, Alsalman Ali, Kareem Rahman, Carter Kealy (2025-11)
Advantages and Challenges of 3D Geopolymer-Based Concrete in Construction - Tang Jiyu, Wang Zhihang, Gao Danying, Yang Lin et al. (2025-11)
Research Progress on 3D Printed Geopolymer Concrete - Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers - Foulki Rida, Mesoudy Mouad, Cherkaoui Khalid (2025-10)
Numerical and Theoretical Analysis of Pumping and Extrusion in 3D Concrete Printing - Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
An Interpretable Data-Driven Approach - Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
Rheology, Strength, and Anisotropy - Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
Advances in Sustainable 3D-Printed Geopolymer Concrete:
Materials, Performance, and Environmental Impact in Next Generation Green Construction - Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
A Case Study in China - Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
Additively Manufactured Smart Materials and Structures in Construction and Building Applications - Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
Optimization of Building Structures Based on Additive Manufacturing:
A Review - Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete - Sahebi Soleyman, Aslani Farhad (2025-07)
Mechanical Strength and Heat Tolerance of 3D Printed Rubberised Concrete at Elevated Temperatures - Chhabra Gulshan, Gupta Anjali, Bali Rajan, Tanwar Lovesh (2025-07)
Advancing Sustainability in Construction:
A Comprehensive Study on 3D-Printed Concrete Technologies - Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
Recent Advances in CDW-Based Geopolymers:
A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability - Sando Mona, Stephan Dietmar (2025-07)
Online Monitoring for 3D Printable Geopolymers:
Automated Slug Test Analysis with Image Analysis Revealing Mixing Sequence Effects - Alkhawaldeh Ayah, Alhassan Mohammad, Sawalha Ansam, Betoush Nour et al. (2025-06)
Integration of 3D Printing and Machine Learning in Sustainable Construction:
Feasibility and Challenges - Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
3D Printing of Conventional and Geopolymer Concretes:
Advancements, Challenges, Future Directions, and Cost Analysis - Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM - Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures - Álvarez-Fernández Martina, Guerrero-Miguel Diego-José, González-Nicieza Celestino, Prendes-Gero María et al. (2025-06)
Mortars with Mining Tailings Aggregates:
Implications for Additive Manufacturing - Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites - Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
An Overview of 3D Printed Concrete for Building Structures:
Material Properties, Sustainability, Future Opportunities, and Challenges - Raza Saim, Sakha Mahsa, Hassan Zohaib, Manshadi Behzad et al. (2025-05)
Flexural Behavior of Stay-in-Place Load-Bearing 3D-Printed Concrete Formwork for Ribbed Slabs - Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval - Mukhtar Faisal (2025-05)
3D-Printed Concrete Fracture:
Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM - Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
A Review of Advances in Laboratory and Real-Scale Construction Projects - Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems - Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
A Review - Mishra Jyotirmoy, Babafemi Adewumi, Combrinck Riaan (2025-04)
Limitations and Research Priorities in 3D-Printed Geopolymer Concrete:
A Perspective Contribution - Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
A Review - An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens - Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag - Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
Optimizing 3D Geopolymer Concrete for Sustainable Construction:
A Review of Material Selection, Printing Methods, and Properties - Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete - Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes - Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete - Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates - Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test - Shahzad Qamar, Li Fangyuan (2025-01)
Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures - Sakhare Vishakha, Najar Mohamed, Deshpande Sachin (2024-12)
Printing Performance of 3D Printed Geopolymer Through Pumpability, Extrudability, Buildability Properties:
A Review - Tarhan Yeşim, Tarhan İsmail, Şahin Remzi (2024-12)
Comprehensive Review of Binder Matrices in 3D Printing Construction:
Rheological Perspectives - Kul Anil, Kocaer Öznur, Aldemir Alper, Yıldırım Gürkan et al. (2024-12)
3D Printable One-Part Alkali-Activated Mortar Derived from Brick-Masonry-Wastes - Forcael Eric, Medina Moisés, Opazo-Vega Alexander, Moreno Francisco et al. (2024-11)
Additive Manufacturing in the Construction Industry - Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
The Rise of Aerial Additive Manufacturing in Construction:
A Review of Material Advancements - Kozub Barbara, Sitarz Mateusz, Gądek Szymon, Ziejewska Celina et al. (2024-11)
Upscaling of Copper Slag-Based Geopolymer to 3D Printing Technology - Loaiza Sebastián, Ortiz Albert, Gómez Daniel, García Alvarez José et al. (2024-11)
3D Printing Applied to Building Development Around the World:
A Systematic Literature Review - Murali Gunasekaran, Leong Sing (2024-11)
Waste-Driven Construction:
A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development - Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms - Fasihi Ali, Libre Nicolas (2024-10)
Interaction Between Material and Process-Parameters During 3D Concrete-Extrusion-Process - Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation - Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
State of the Art of Mechanical Properties of 3D Printed Concrete - Lim Sean, Tay Yi, Paul Suvash, Lee Junghyun et al. (2024-09)
Carbon Capture and Sequestration with In-Situ CO2 and Steam Integrated 3D Concrete Printing - Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
Development of Outdoor Furniture Using 3D Concrete Printing - Rodrigues e Silva Rafaela, Souza Eduarda, Ribeiro Borges Paulo (2024-09)
One-Part and Two-Part Alkali-Activation of Iron Mining-Tailings for Sustainable 3D Concrete Printing Mixes - Sovetova Meruyert, Calautit John (2024-09)
Effect of the Printing Process on Thermal Performance of 3D Printed Structures - Sovetova Meruyert, Kaiser Calautit John (2024-08)
Thermal and Energy Efficiency in 3D Printed Buildings:
Review of Geometric Design, Materials and Printing Processes - Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete - Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
Additive Manufacturing Evolution in Construction:
From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications - Rubeis Tullio, Ciccozzi Annamaria, Giusti Letizia, Ambrosini Dario (2024-07)
On the Use of 3D Printing to Enhance the Thermal Performance of Building Envelope:
A Review - Huang Zili, Yang Weiyi, Verma Rupesh, Nguyen Giang et al. (2024-07)
Application of Adelaide-University-Snapback-Indirect-Tensile-Test on 3D Printed Cement-Based Materials - Sovetova Meruyert, Calautit John (2024-07)
Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures - Asghari Y., Mohammadyan-Yasouj S., Petrů M., Ghandvar H. et al. (2024-07)
3D Printing and Implementation of Engineered Cementitious Composites:
A Review - Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete - Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
Critical Factors, Advancements, Challenges, and Future Directions - Gu Yucun, Khayat Kamal (2024-06)
Effect of Superabsorbent Polymer on 3D Printing Characteristics as Rheology-Modified-Agent - To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings - Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete - Gu Yucun, Khayat Kamal (2024-05)
Extrudability Window and Off-Line Test-Methods to Predict Buildability of 3D Printing Concrete - Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha (2024-05)
3D Concrete Printing Success:
An Exhaustive Diagnosis and Failure-Modes-Analysis - Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall - Zhou Boyu, Zhang Mo, Ma Guowei (2024-05)
An Experimental Study on 3D Printed Concrete Reinforced with Fibers Recycled from Wind Turbine Blades - Zaid Osama, Ouni Mohamed (2024-04)
Advancements in 3D Printing of Cementitious Materials:
A Review of Mineral Additives, Properties, and Systematic Developments - Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2024-03)
Durability and Pore-Structure of Metakaolin-Based 3D Printed Geopolymer Concrete - İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
A Comprehensive Study on Operational and Material Parameters - Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
Concrete 3D Printing Technology in Sustainable Construction:
A Review on Raw Materials, Concrete Types and Performances - Moraes Maria, Nagata Ester, Duran Afonso, Rossignolo João (2024-02)
Alkali-Activated Materials Applied in 3D Printing Construction:
A Review - Fasihi Ali, Libre Nicolas (2024-01)
From Pumping to Deposition:
A Comprehensive Review of Test-Methods for Characterizing Concrete-Printability - Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures - Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete - Özalp Fatih (2024-01)
Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete - Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete - Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending - Meere Hani, Yan Shuaxing, Wang Dongpo, Bi Yuzhang (2024-01)
Behavior of Traditional Concrete Dams and Three-Dimensional Printed Concrete Dams Under the Debris Flow Impact - Neri Manuela, Licciardello Lucia, Reggia Adriano, Pilotelli M. et al. (2024-01)
Improving the Energy Performance of a 3D Printed Wall Using Recycled Material - Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
Mechanical Properties of 3D Printed Concrete Components:
A Review - Khan Mehran, McNally Ciaran (2023-11)
A Holistic Review on the Contribution of Civil Engineers for Driving Sustainable Concrete Construction in the Built Environment - Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis - Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2023-10)
Geopolymer Mortars for Use in Construction 3D Printing:
Effect of LSS, Graphene-Oxide and Nano-Clay at Different Environmental Conditions - Tay Yi, Lim Sean, Phua Seng, Tan Ming et al. (2023-10)
Exploring Carbon-Sequestration-Potential Through 3D Concrete Printing - Zhou Yi, Althoey Fadi, Alotaibi Badr, Gamil Yaser et al. (2023-10)
An Overview of Recent Advancements in Fiber-Reinforced 3D Printing Concrete - Tarhan Yeşim, Şahin Remzi (2023-10)
The Physicomechanical Behavior and Microstructure of Air-Entrained 3D Printable Concrete - Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
Impact on 3D Printing Performance and Material-Properties - Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
Environmental Life-Cycle-Analysis and 3D Printability - Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites - Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
A Durable, Sustainable and Cost-Competitive Product? - Saadati Farzaneh, Kani Ebrahim (2023-09)
Phosphorous Slag-Based Geopolymer Cement Incorporate with Mullite for 3D Printing Application - Ingle Vaibhav, Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan (2023-09)
3D Printable Concrete Without Chemical Admixtures:
Fresh and Hardened Properties - Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
Modification of Fine Multicomponent Concrete with Activated Component-Based Additive - Ji Yameng, Poullain Philippe, Leklou Ali (2023-09)
The Selection and Design of Earthen Materials for 3D Printing - Mader Thomas, Schreter-Fleischhacker Magdalena, Shkundalova Olena, Neuner Matthias et al. (2023-09)
Constitutive Modeling of Orthotropic Non-Linear Mechanical Behavior of Hardened 3D Printed Concrete - Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
Effect of Operational- and Material-Oriented Parameters - Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications - Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
Evaluating Fresh and Hardened Properties - Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete - Villaquirán-Caicedo Mónica, Fernández-González Alejandro, Fernández-García Daniel, Gutiérrez Ruby (2023-07)
Valorization of a Low-Quality Coal-Ash, in the Preparation of Alkali-Activated Inks for Applications in 3D Additive Manufacturing - Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
A Review - Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials - Jesus Manuel, Pessoa Ana Sofia, Guimarães Ana, Rangel Bárbara et al. (2023-06)
A Reflection on Sustainable Opportunities for 3D Printing in Construction - Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
Influences of Filament Offset on Mechanical Properties - Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM - Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer - Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
Off-Site Construction with 3D Concrete Printing - Mogaji Iseoluwa, Mewomo Modupe, Toyin James (2023-05)
Key Barriers to the Adoption of 3D Printing Innovation in Construction:
A Review of Empirical Studies - Bhushan Jindal Bharat, Jangra Parveen (2023-05)
3D Printed Concrete:
A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications - Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
3D Printing of Limestone-Calcined-Clay-Cement:
A Review of Its Potential Implementation in the Construction-Industry - Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
A Review - Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing - Onanuga Babajide, Biernacki Joseph (2023-03)
Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials - Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar - Dai Xiaodi, Tao Yaxin, Tittelboom Kim, Schutter Geert (2023-02)
Rheological and Mechanical Properties of 3D Printable Alkali-Activated Slag Mixtures with Addition of Nano Clay - Şahin Hatice, Mardani Ali (2023-02)
Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
A State‐of‐the‐art Review - Baigarina Akerke, Shehab Essam, Ali Md. (2023-02)
Construction 3D Printing:
A Critical Review and Future Research-Directions - Bazli Milad, Ashrafi Hamed, Rajabipour Ali, Kutay Cat (2023-02)
3D Printing for Remote Housing:
Benefits and Challenges - Ahmed Ghafur (2023-01)
A Review of 3D Concrete Printing:
Materials and Process Characterization, Economic Considerations and Environmental Sustainability - Cao Chenyu, Sun Dongsheng, Xian Zhijun, Zhang Hengyu (2022-12)
A Brief Review of 3D Printed Concrete - Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
Engineering, Environmental and Economic Feasibility - Uddin Md (2022-12)
Influence of 3D Printable Sustainable Concrete and Industrial Waste on Industry 5.0 - Peng Yiming, Unluer Cise (2022-12)
Development of Alternative Cementitious Binders for 3D Printing Applications:
A Critical Review of Progress, Advantages and Challenges - İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols - Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
A Review - Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy - Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
Prospect and Barrier of 3D Concrete:
A Systematic Review - Tay Yi, Ting Guan, Panda Biranchi, Wong Teck et al. (2022-11)
Towards Net-Zero in 3DP for Building & Construction - Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars - Qaidi Shaker, Yahia Ammar, Tayeh B., Unis H. et al. (2022-10)
3D Printed Geopolymer Composites:
A Review - Chen Yu, Toosumran Nuttapon, Chehab Noura, Spanjers Henri et al. (2022-10)
Feasibility Study of Using Desalination-Brine to Control the Stiffness and Early-Age Hydration of 3D Printable Cementitious Materials - Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods - Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization - Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties - Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2022-09)
Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing - He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
An Experimental and Theoretical Investigation - Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
Test-Methods for 3D Printable Concrete - Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite - Khosravani Mohammad, Haghighi Azadeh (2022-08)
Large-Scale Automated Additive Construction:
Overview, Robotic Solutions, Sustainability, and Future Prospect - Raza Muhammad, Zhong Ray (2022-08)
A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry - Silva Guido, Ñañez Robert, Zavaleta Diana, Burgos Valeria et al. (2022-07)
Eco-Friendly Additive Construction:
Analysis of the Printability of Earthen-Based Matrices Stabilized with Potato-Starch-Gel and Sisal-Fibers - Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
A Review of Large-Scale 3DCP:
Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies - Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-06)
Hardened Properties of 3D Printed Concrete with Recycled Coarse Aggregate - Ma Guowei, Yan Yufei, Zhang Mo, Sanjayan Jay (2022-05)
Effect of Steel-Slag on 3D Concrete Printing of Geopolymer with Quaternary Binders - Aslani Farhad, Dale Ryan, Hamidi Fatemeh, Valizadeh Afsaneh (2022-05)
Mechanical and Shrinkage Performance of 3D Printed Rubberised Engineered Cementitious Composites - Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Burak (2022-04)
A Comprehensive Review on Fresh State Rheological Properties of Extrusion-Mortars Designed for 3D Printing Applications - Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate - Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
A Review - Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
A Review - Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate - Liu Jie, Lv Chun (2022-03)
Properties of 3D Printed Polymer Fiber-Reinforced Mortars:
A Review - İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing - Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete - Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes - Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation - Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar - Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures - Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading - Zhong Hui, Zhang Mingzhong (2022-02)
3D Printing Geopolymers:
A Review - Eugenin Claudia, Navarrete Iván, Brevis Wernher, Lopez Mauricio (2022-02)
Air-Bubbles as an Admixture for Printable Concrete:
A Review of the Rheological Effect of Entrained Air - Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
A Review on Recent Progresses - Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete - Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
A Review - Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations - Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
Mixture Design and Mechanical Properties - Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
3D Printable Alkali-Activated Concretes for Building Applications:
A Critical Review - Şahin Hatice, Mardani Ali (2021-12)
Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
A State of the Art Review - Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
3D Printed Concrete with Recycled Glass:
Effect of Glass Gradation on Flexural Strength and Microstructure - Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete - Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing - Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy - Kondepudi Kala, Subramaniam Kolluru (2021-11)
Extrusion-Based Three-Dimensional Printing Performance of Alkali-Activated Binders - Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures - Xu Zhen, Song Tao, Guo Shuai, Peng Jiangtao et al. (2021-10)
Robotics Technologies Aided for 3D Printing in Construction:
A Review - Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
3D Printable Concrete with Natural and Recycled Coarse Aggregates:
Rheological, Mechanical and Shrinkage Behavior - Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing - Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures - Munir Qaisar, Peltonen Riku, Kärki Timo (2021-08)
Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams - Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials - Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
A Numerical Study - Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
Large-Scale 3D Printing Concrete Technology:
Current Status and Future Opportunities - Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
Printability and Direction-Dependent Mechanical Performance - Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete - Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications - Ning Xin, Liu Tong, Wu Chunlin, Wang Chao (2021-04)
3D Printing in Construction:
Current Status, Implementation Hindrances, and Development Agenda - Ting Guan, Tay Yi, Tan Ming (2021-04)
Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing - Helsel Michelle, Popovics John, Stynoski Peter, Kreiger Eric (2021-03)
Non-Destructive Testing to Characterize Inter-Layer Bonds of Idealized Concrete Additive Manufacturing Products - Cho Seung, Kruger Jacques, Rooyen Algurnon, Zijl Gideon (2021-03)
Rheology and Application of Buoyant Foam-Concrete for Digital Fabrication - Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments - Teixeira João, Schaefer Cecília, Rangel Bárbara, Alves Jorge et al. (2021-03)
Development of 3D Printing Sustainable Mortars Based on a Bibliometric Analysis - Long Wujian, Lin Can, Tao Jie-Lin, Ye Taohua et al. (2021-02)
Printability and Particle-Packing of 3D Printable Limestone-Calcined-Clay-Cement Composites - Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System - Kondepudi Kala, Subramaniam Kolluru (2021-02)
Formulation of Alkali-Activated Fly-Ash-Slag Binders for 3D Concrete Printing - Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
Possibilities and Challenges - Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials - Ramadany Mohamed, Bajjou Mohamed (2021-01)
Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
A Case Study - Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
A Review - Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
Biomimicry for 3D Concrete Printing:
A Review and Perspective - Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
A Review of 3D Printed Concrete:
Performance-Requirements, Testing Measurements and Mix-Design - Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure - Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
Extrusion-Based Concrete 3D Printing from a Material Perspective:
A State of the Art Review - Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer - Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing - Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete - Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction - Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
A Review - Beersaerts Glenn, Lucas Sandra, Pontikes Yiannis (2020-07)
An Fe-Rich Slag-Based Mortar for 3D Printing - Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
Effects of Curing Condition and Print-Time Interval - Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing - Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
Hardened Properties of Layered 3D Printed Concrete with Recycled Sand - Rashid Ans, Khan Shoukat, Ghamdi Sami, Koç Muammer (2020-06)
Additive Manufacturing:
Technology, Applications, Markets, and Opportunities for the Built Environment - He Lewei, Chow Wai, Li Hua (2020-06)
Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste - Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
Setting-on-Demand for Digital Concrete:
Principles, Measurements, Chemistry, Validation - Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials - Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up - Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites - Shahsavari Rouzbeh, Hwang Sung (2020-03)
Bio-Iinspired Cementitious Materials:
Main Strategies, Progress, and Applications - Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture - Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing - Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods - Markin Slava, Šahmenko Genādijs, Nerella Venkatesh, Näther Mathias et al. (2019-11)
Investigations on the Foam-Concrete Production Techniques Suitable for 3D Printing with Foam-Concrete - Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content - Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2019-08)
Mechanical Characterization of 3D Printable Concrete - Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing - Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication - Alghamdi Hussam, Neithalath Narayanan (2019-07)
Synthesis and Characterization of 3D Printable Geopolymeric Foams for Thermally Efficient Building Envelope Materials - Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
A Review of the Current Progress and Application of 3D Printed Concrete - Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing - Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
Additive Manufacturing Processes for Infrastructure Construction:
A Review - Hamidi Fatemeh, Aslani Farhad (2019-05)
Additive Manufacturing of Cementitious Composites:
Materials, Methods, Potentials, and Challenge - Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
A Fundamental Study of Extrudability and Early-Age Strength Development - Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
Utilization of Recycled Glass for 3D Concrete Printing:
Rheological and Mechanical Properties - Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications - Zuo Zibo, Gong Jian, Huang Yulin, Zhan Yijian et al. (2019-03)
Experimental Research on Transition from Scale 3D Printing to Full-Size Printing in Construction - Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications - Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing - Kaufhold Julia, Kohl Johannes, Nerella Venkatesh, Schröfl Christof et al. (2019-02)
Wood-Based Support Material for Extrusion-Based Digital Construction - Panda Biranchi, Lim Jian, Tan Ming (2019-02)
Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction - Alghamdi Hussam, Nair Sooraj, Neithalath Narayanan (2019-02)
Insights into Material-Design, Extrusion Rheology, and Properties of 3D Printable Alkali-Activated Fly-Ash-Based Binders - Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing - Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing - Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete - Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay - Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction - Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing - Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing - Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2018-09)
Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature - Chen Yu, Veer Frederic, Çopuroğlu Oğuzhan, Schlangen Erik (2018-09)
Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing - Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
Bond Strength in 3D Printed Geopolymer Mortar - Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
Large-Scale 3D Printing by a Team of Mobile Robots - Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process - Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Panda Biranchi, Tay Yi, Paul Suvash, Tan Ming (2018-05)
Current Challenges and Future Potential of 3D Concrete Printing - Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement - Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates - Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
An Experimental Investigation - Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
Fresh Properties of a Novel 3D Printing Concrete Ink - Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer - Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology - Panda Biranchi, Tan Ming (2018-03)
Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing - Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells - Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach - Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar
BibTeX
@article{pand_paul_lim_tay.2017.AMoGfSBE,
author = "Biranchi Narayan Panda and Suvash Chandra Paul and Jian Hui Lim and Yi Wei Daniel Tay and Ming Jen Tan",
title = "Additive Manufacturing of Geopolymer for Sustainable Built Environment",
doi = "10.1016/j.jclepro.2017.08.165",
year = "2017",
journal = "Journal of Cleaner Production",
volume = "167",
pages = "281--288",
}
Formatted Citation
B. N. Panda, S. C. Paul, J. H. Lim, Y. W. D. Tay and M. J. Tan, “Additive Manufacturing of Geopolymer for Sustainable Built Environment”, Journal of Cleaner Production, vol. 167, pp. 281–288, 2017, doi: 10.1016/j.jclepro.2017.08.165.
Panda, Biranchi Narayan, Suvash Chandra Paul, Jian Hui Lim, Yi Wei Daniel Tay, and Ming Jen Tan. “Additive Manufacturing of Geopolymer for Sustainable Built Environment”. Journal of Cleaner Production 167 (2017): 281–88. https://doi.org/10.1016/j.jclepro.2017.08.165.