Overview of the Development of 3D Printing Concrete (2021-10)¶
A Review
, Zhao Dongliang, Hou Xiaohui, Sun Li, Zhang Qiang
Journal Article - Applied Sciences, Vol. 11, Iss. 21
Abstract
3D-printing concrete technology has attracted more and more attention for smart construction due to its advantages of digitization, automation, and high degree of intelligence. This article introduces the basic principles and related processes of concrete 3D-printing technology, and reviews the development from the following four fields: the material properties, preparation technology, printing parameters, and evaluation criteria of 3D-printing concrete technology. Then the existing difficulties, development direction and key technologies of 3D-printing concrete are described. Finally, we look forward to the development prospects of 3D-printing concrete from the aspects of printing materials, software and hardware cooperation, printing technology, etc. All the researches will provide the useful references for the later development and research.
¶
58 References
- Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction - Bhattacherjee Shantanu, Santhanam Manu (2020-07)
Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating-Admixture on Surface - Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction - Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture - Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
A Fundamental Study of Extrudability and Early-Age Strength Development - Christ Susanne, Schnabel Martin, Vorndran Elke, Groll Jürgen et al. (2014-10)
Fiber-Reinforcement During 3D Printing - Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers - Hack Norman, Lauer Willi (2014-04)
Mesh Mould:
Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork - Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste - Hambach Manuel, Volkmer Dirk (2017-02)
Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste - Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
An Experimental and Computational Investigation - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse - Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
Experimental Approach for Printability-Assessment:
Toward a Practical Decision-Making Framework of Printability for Cementitious Materials - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Li Zhijian, Wang Li, Ma Guowei (2018-05)
Method for the Enhancement of Buildability and Bending-Resistance of 3D Printable Tailing Mortar - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Lin Jia, Wu Xiong, Yang Wen, Zhao Ri et al. (2018-02)
The Influence of Fine Aggregates on the 3D Printing Performance - Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
Complex Concrete Structures:
Merging Existing Casting Techniques with Digital Fabrication - Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing - Ma Guowei, Li Zhijian, Wang Li (2017-12)
Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing - Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing - Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing - Ma Guowei, Wang Li (2017-08)
A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing - Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
3D Concrete Printing:
Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups - Marchment Taylor, Sanjayan Jay (2019-10)
Mesh Reinforcing Method for 3D Concrete Printing - Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
Concept and Feasibility Study - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D) - Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing - Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
A Review of 3D Concrete Printing Systems and Materials Properties:
Current Status and Future Research Prospects - Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction - Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques - Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
Potentials of Steel-Fibers for Mesh Mould Elements - Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
3D Printable Concrete:
Mixture-Design and Test-Methods - Sakka Fatima, Assaad Joseph, Hamzeh Farook, Nakhoul Charbel (2019-07)
Thixotropy and Interfacial Bond Strengths of Polymer-Modified Printed Mortars - Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing - Tay Yi, Li Mingyang, Tan Ming (2019-04)
Effect of Printing Parameters in 3D Concrete Printing:
Printing Region and Support Structures - Tay Yi, Qian Ye, Tan Ming (2019-05)
Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test - Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
Utilization of Recycled Glass for 3D Concrete Printing:
Rheological and Mechanical Properties - Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
Lightweight Concrete 3D Printing by Selective Cement-Activation:
Investigation of Thermal Conductivity, Strength and Water-Distribution - Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures - Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model - Wolfs Robert, Bos Freek, Salet Theo (2018-02)
Early-Age Mechanical Behaviour of 3D Printed Concrete:
Numerical Modelling and Experimental Testing - Wolfs Robert, Bos Freek, Salet Theo (2019-03)
Hardened Properties of 3D Printed Concrete:
The Influence of Process Parameters on Inter-Layer Adhesion - Yuan Qiang, Li Zemin, Zhou Dajun, Huang Tingjie et al. (2019-08)
A Feasible Method for Measuring the Buildability of Fresh 3D Printing Mortar - Zareiyan Babak, Khoshnevis Behrokh (2017-08)
Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete - Zareiyan Babak, Khoshnevis Behrokh (2017-06)
Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness - Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content - Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
65 Citations
- Kechagia Aikaterini, Tzounis Lazaros, Kechagias John (2026-01)
3D Printing Concrete:
A Short Review of Systems and Materials - Gil-Lopez Tomas, Amirfiroozkoohi Alireza, Valiente López María, Verdu-Vazquez Maria (2026-01)
The Impact of 3D Printing on Mortar Strength and Flexibility:
A Comparative Analysis of Conventional and Additive Manufacturing Techniques - Basith Mydeen Pitchai Mohamed Abdul (2025-12)
Polymer-Enhanced Composites for 3D Concrete Printing:
A Review of Materials, Processes, and Performance - Ruiz Pedro, Moreno Inna, Alvarado Rodrigo (2025-11)
On the Tectonic Properties of 3D Printed Architecture:
On the Tectonic Properties of 3D Printed Architecture - Silva Neesha, Rajapaksha Upendra, Udawattha Chameera (2025-11)
Tailoring 3D Printing for Personalized Housing:
Selecting the Right Technology for Custom Home Construction - Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology - Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
A Review - Sabouni Reem, Martini Samer (2025-09)
Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties - Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions - Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
Influence of Process Parameters on 3D Concrete Printing:
A Step Towards Standardized Approaches - Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
Design, Mechanical Properties and Microstructural Analysis - Santhosh S., Raphael Benny, Santhanam Manu (2025-07)
Exploration of Sustainable Beam Design Using Voronoi Patterns in Concrete 3D Printing - Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate - Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
A Comprehensive Review on 3D Printing of Concrete:
Materials, Methods and Mechanical Properties - Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
Unveiling Additive Effects in 3D Printed Geopolymer Composites:
A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition - Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm - Lamb Bannon, Sabih Gauhar (2025-06)
Advancements in 3D Concrete Printing Materials - Cisowski Adam, Kowalik Michał (2025-06)
The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
A Preliminary Study - Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
An Overview of 3D Printed Concrete for Building Structures:
Material Properties, Sustainability, Future Opportunities, and Challenges - Ding Tao, Peng Zechen, Dong Haining (2025-05)
Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures - Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
From Waste to Strength:
Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites - Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns - Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
From Printing to Performance:
A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment - Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete - Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
Effect of 2.5D Rebar Structure on the Flexural Performance of Slab - Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades - Minde Pravin, Patil Jagruti (2025-03)
A Comprehensive Review of Factors Affecting 3D Printing Technology Adaptation in the Indian Construction Sector - Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures - Elango K., Saravanakumar R., Vivek D., Yuvaraj S. et al. (2025-01)
A Critical Review of Fresh, Hardened and Durability Properties of 3D Printing Concrete - Forcael Eric, Medina Moisés, Opazo-Vega Alexander, Moreno Francisco et al. (2024-11)
Additive Manufacturing in the Construction Industry - Wang Qingwei, Han Song, Yang Junhao, Li Ziang et al. (2024-11)
Optimizing Printing and Rheological Parameters for 3D Printing with Cementitious Materials - Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
A Systematic Review - Zhi Zhenzhen, Guo Yanfei, Qi Huahui, Tan Hongbo et al. (2024-11)
Effect of Alkali-Metal-Sulfates on Hydration Properties of Alpha-Calcium-Sulfate-Hemihydrate for 3D Printing - Shahzad Qamar, Li Fangyuan (2024-11)
Assessing the Load-Bearing Capacity of 3D Printed Concrete at Early-Ages:
An Innovative Approach - Zhao Herui, Jiang Quan, Xia Yong, Liu Jian et al. (2024-11)
Microbial-Induced Carbonate Reinforcement for 3D Printed Concrete:
Testing in Printable and Mechanical Strength - Mackin Anthony, Hanoun Zaid, Migliorino Jenna, Ahmed Aly et al. (2024-10)
Multi-Functional Additively Constructed Honeycomb Walls for Housing and Sheltering - Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
Micro/Nano Additives in 3D Printing Concrete:
Opportunities, Challenges, and Potential Outlook in Construction Applications - Tran Nhi, Tran Mien, Tran Jonathan, Nguyen Anh et al. (2024-09)
Eco-Friendly 3D Printed Concrete Using Steel-Slag-Aggregate:
Buildability, Printability and Mechanical Properties - Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces - Kreiger Megan, Kreiger Eric, Mansour Stephan, Monkman Sean et al. (2024-09)
Additive Construction in Practice:
Realities of Acceptance Criteria - Reddy B., Sameer Sk, Ramesh V., Sriya B. et al. (2024-08)
Sustainable Development of 3D Printable Quaternary Geopolymer Concrete - Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
Preliminary Study - Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
Time-Dependent Buildability Evaluation of 3D Printed Concrete:
Experimental Validation and Numerical Simulation - Mitrović Stefan, Vidović Milica, Ignjatović Ivan, Dragaš Jelena (2024-07)
Experimental Testing of 3D Printed Concrete Truss-Girder - Ralston Nadia, Gupta Shashank, Moini Mohamadreza (2024-05)
3D Printing of Architected Calcium-Silicate Binders with Enhanced and In-Situ Carbonation - Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
Building a Greener Future:
Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars - Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing - Mahanthi S., Kantarao M., Uma Maheswara Rao S., Niharika M. et al. (2024-02)
Sustainable Mix-Design for 3D Printable Concrete - Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
FloatArch:
A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization - Prem Prabhat, Ambily Parukutty, Kumar Shankar, Ghodke Swapnil (2024-01)
A Theoretical Model to Predict the Structural Buildability of 3D Printable Concrete - Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
Spray-Based 3D Concrete Printing-Parameter Design-Model:
Actionable Insight for High Printing Quality - Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
A Review - Sedghi Reza, Rashidi Kourosh, Hojati Maryam (2024-01)
Large-Scale 3D Wall Printing:
From Concept to Reality - Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar - Vignesh B., Parthasarathi N. (2023-11)
Analytical Study on 3D Printed Concrete Wall with Different Wall-Configurations When Exposed to High Temperature - Yang In-Hwan, Bui The, Park Jihun, Jeong Seung-Tae (2023-10)
A Feasibility Study on the Lateral Behavior of a 3D Printed Column for Application in a Wind Turbine Tower - Christ Julian, Leusnik Sander, Koss Holger (2023-10)
Multi-Axial 3D Printing of Biopolymer-Based Concrete Composites in Construction - Chougan Mehdi, Kheetan Mazen, Ghaffar Seyed (2023-07)
Additive Manufacturing and the Construction Industry - Almomani Mohammed, Ababneh Nedal, Abdalla Khairedin, Shbeeb Nadim et al. (2023-07)
Selecting the Best 3D Concrete Printing Technology for Refugee Camp’s Shelter Construction Using Analytical Hierarchy Process:
The Case of Syrian Refugees in Jordan - Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
A Review - Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
A Review - Weiner G., Wurst G., Lessmeister T., Sherizadeh T. et al. (2022-09)
Triangulating Impact Location in 3D Printable Concrete Using Fiber Bragg Grating Sensors - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar? - Gimenez-Carbo Ester, Torres Raquel, Coll Hugo, Roig-Flores Marta et al. (2022-04)
Preliminary Study of the Fresh and Hard Properties of UHPC That Is Used to Produce 3D Printed Mortar - Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2022-02)
Printability-Assessment of Cement-Based Materials Based on Rheology, Hydration Kinetics, and Viscoelastic Properties
BibTeX
@article{lyu_zhao_hou_sun.2021.OotDo3PC,
author = "Fuyan Lyu and Dongliang Zhao and Xiaohui Hou and Li Sun and Qiang Zhang",
title = "Overview of the Development of 3D Printing Concrete: A Review",
doi = "10.3390/app11219822",
year = "2021",
journal = "Applied Sciences",
volume = "11",
number = "21",
}
Formatted Citation
F. Lyu, D. Zhao, X. Hou, L. Sun and Q. Zhang, “Overview of the Development of 3D Printing Concrete: A Review”, Applied Sciences, vol. 11, no. 21, 2021, doi: 10.3390/app11219822.
Lyu, Fuyan, Dongliang Zhao, Xiaohui Hou, Li Sun, and Qiang Zhang. “Overview of the Development of 3D Printing Concrete: A Review”. Applied Sciences 11, no. 21 (2021). https://doi.org/10.3390/app11219822.