Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures (2025-06)¶
Lin Wenyu, , , Bai Gang, Wang Qiang, Qu Yao
Journal Article - Journal of Building Engineering, No. 113134
Abstract
3D-printed concrete (3DPC) has demonstrated substantial potential for fabricating geometrically complex structures through its inherent capabilities of parametric design flexibility and formwork-free construction. This review systematically examines the critical triad of structural design, material property control, and deposition technologies essential for 3DPC of non-standard geometries. In structural design, the synergistic integration of biomimetic principles with topology optimization enables lightweight configurations while maintaining material efficiency. For material properties, precisely controlled chemical coagulation and physical flocculation processes effectively mitigate strength deficiency and deformation challenges during rapid concrete deposition. Regarding deposition technologies, the implementation of modular printing strategies, auxiliary support systems, and injection 3D-printed concrete methods demonstrates measurable improvements in both structural integrity and manufacturing efficiency. Although challenges persist in large-scale applications, continuous advancements in automated process control and material innovation suggest transformative potential for architectural engineering applications.
¶
105 References
- Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
3D Concrete Printing:
Free-Form Geometries with Improved Ductility and Strength - Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
The Case of a 29m Bridge in the Netherlands - Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
Tor Alva:
A 3D Concrete Printed Tower - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete - Baktheer Abedulgader, Claßen Martin (2024-07)
A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete - Bazli Milad, Ashrafi Hamed, Rajabipour Ali, Kutay Cat (2023-02)
3D Printing for Remote Housing:
Benefits and Challenges - Bekkering Juliette, Kuit Barbara, Biffi Alessia, Ahmed Zeeshan (2020-07)
Architectonic Explorations of the Possibilities of 3D Concrete Printing:
The Historic Building Fragment as Inspiration for New Applications with 3D Concrete Printing in Architecture - Bhooshan Shajay, Bhooshan Vishu, Megens Johannes, Casucci Tommaso et al. (2022-09)
Print-Path Design for Inclined-Plane Robotic 3D Printing of Unreinforced Concrete - Bhushan Jindal Bharat, Jangra Parveen (2023-05)
3D Printed Concrete:
A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications - Bi Minghao, Tran Jonathan, Xia Lingwei, Ma Guowei et al. (2022-06)
Topology-Optimization for 3D Concrete Printing with Various Manufacturing-Constraints - Brun Francis, Gaspar Florindo, Mateus Artur, Vitorino João et al. (2020-07)
Experimental Study on 3D Printing of Concrete with Overhangs - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
Freeform Construction:
Mega-Scale Rapid Manufacturing for Construction - Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
Additive Manufacturing of Cantilever:
From Masonry to Concrete 3D Printing - Cesaretti Giovanni, Dini Enrico, Kestelier Xavier, Colla Valentina et al. (2013-08)
Building Components for an Outpost on the Lunar Soil by Means of a Novel 3D Printing Technology - Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete - Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing - Delavar Mohammad, Chen H., Sideris Petros (2024-01)
Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading - Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers - Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
From Material-Design to Structural Bearing-Capacity-Assessment - Du Guoqiang, Qian Ye (2024-10)
Bio-Inspired Innovations in 3D Concrete Printing:
Structures, Materials and Applications - Furet Benoît, Poullain Philippe, Garnier Sébastien (2019-04)
3D Printing for Construction Based on a Complex Wall of Polymer-Foam and Concrete - Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars - Ghaffar Seyed, Corker Jorge, Fan Mizi (2018-05)
Additive Manufacturing Technology and Its Implementation in Construction as an Eco-Innovative Solution - Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
Large-Scale 3D Printing of Ultra-High-Performance Concrete:
A New Processing Route for Architects and Builders - Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork - Hack Norman, Mai (née Dressler) Inka, Brohmann Leon, Gantner Stefan et al. (2020-03)
Injection 3D Concrete Printing (I3DCP):
Basic Principles and Case Studies - Hamidi Fatemeh, Aslani Farhad (2019-05)
Additive Manufacturing of Cementitious Composites:
Materials, Methods, Potentials, and Challenge - Han Xiaoyu, Yan Jiachuan, Liu Mingjian, Huo Liang et al. (2021-10)
Experimental Study on Large-Scale 3D Printed Concrete Walls Under Axial Compression - Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete - Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
A Review of 3D Printed Concrete:
Performance-Requirements, Testing Measurements and Mix-Design - Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
Self-Supporting Lamellae:
Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures - Huang Shuyi, Xu Weiguo, Yin Yudong (2023-03)
Improving the Overhang of 3D Printed Concrete Shells by Wrinkle Structures - Kamhawi Abdallah, Meibodi Mania (2024-09)
Techniques and Strategies in Extrusion-Based 3D Concrete Printing of Complex Components to Prevent Premature Failure - Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars - Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
Characterization of 3D Printing Mortars Made with OPC-CSA Mixes - Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
Materials, Engineered Properties and Techniques for Additive Manufacturing - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
3D Concrete Printing:
A Lower-Bound Analytical Model for Buildability-Performance-Quantification - Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
Additive Construction:
State of the Art, Challenges and Opportunities - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Li Victor, Bos Freek, Yu Kequan, McGee Wesley et al. (2020-04)
On the Emergence of 3D Printable Engineered, Strain-Hardening Cementitious Composites - Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures - Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-03)
Experimental Study on Rheological Properties and 3D Printing of Simulated Lunar Soil Polymers - Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
FloatArch:
A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization - Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components - Liu Junli, Li Shuai, Fox Kate, Tran Jonathan (2021-12)
3D Concrete Printing of Bio-Inspired Bouligand Structure:
A Study on Impact-Resistance - Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
3D Printing Concrete Structures:
State of the Art, Challenges, and Opportunities - Lowke Dirk, Vandenberg Aileen, Pierre Alexandre, Thomas Amaury et al. (2021-07)
Injection 3D Concrete Printing in a Carrier Liquid:
Underlying Physics and Applications to Lightweight Space Frame Structures - Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing - Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
3D Concrete Printing:
Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups - Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete - Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
Design-Optimization of 3D Printed Concrete Elements Considering Buildability - Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
Additive Manufacturing and Performance of Architectured Cement-Based Materials - Murali Gunasekaran, Leong Sing (2024-11)
Waste-Driven Construction:
A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development - Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-02)
Set-on-Demand Geopolymer Using Print-Head Mixing for 3D Concrete Printing - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
Modelling of 3D Concrete Printing Process:
A Perspective on Material and Structural Simulations - Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
A Review - Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries - Otto Jens, Maiwald Patrick (2024-05)
Classification and Automated Quality Assurance of 3D Concrete Printed Surfaces - Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
Additive Manufacturing of Geopolymer for Sustainable Built Environment - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay - Pegna Joseph (1997-02)
Exploratory Investigation of Solid Freeform Construction - Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
Biomimicry for 3D Concrete Printing:
A Review and Perspective - Prasittisopin Lapyote, Pongpaisanseree Kittisak, Jiramarootapong Patiphat, Snguanyat Chalermwut (2020-07)
Thermal- and Sound-Insulation of Large-Scale 3D Extrusion-Printing Wall-Panel - Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
Setting-on-Demand for Digital Concrete:
Principles, Measurements, Chemistry, Validation - Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete - Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
3D Printing with Cementitious Materials:
Challenges and Opportunities for the Construction Sector - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
Vision of 3D Printing with Concrete:
Technical, Economic and Environmental Potentials - Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing - Shakur Emad, Shaked Adaya, Amir Oded (2024-09)
Topology and Shape-Optimization of 3D Pre-Stressed Concrete Structures - Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
Description, Application and Validation - Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
3D Printed Concrete for Large-Scale Buildings:
An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects - Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
Elastic Buckling and Plastic Collapse During 3D Concrete Printing - Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
From Transportation to Fabrication - Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
Possibilities and Challenges - Tay Yi, Li Mingyang, Tan Ming (2019-04)
Effect of Printing Parameters in 3D Concrete Printing:
Printing Region and Support Structures - Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters - Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete - Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology - Vantyghem Gieljan, Corte Wouter, Shakour Emad, Amir Oded (2020-01)
3D Printing of a Post-Tensioned Concrete Girder Designed by Topology-Optimization - Vantyghem Gieljan, Ooms Ticho, Corte Wouter (2020-11)
VoxelPrint:
A Grasshopper Plug-In for Voxel-Based Numerical Simulation of Concrete Printing - Wang Li, Jiang Hailong, Li Zhijian, Ma Guowei (2020-02)
Mechanical Behaviors of 3D Printed Lightweight Concrete Structure with Hollow Section - Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials - Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing - Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
Experiments and Molecular Dynamics Studies - Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
Experimental and Numerical Analysis - Wang Li, Ye Kehan, Wan Qian, Li Zhijian et al. (2023-05)
Inclined 3D Concrete Printing:
Build-Up Prediction and Early-Age Performance-Optimization - Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing - Wolfs Robert, Bos Freek, Salet Theo (2018-02)
Early-Age Mechanical Behaviour of 3D Printed Concrete:
Numerical Modelling and Experimental Testing - Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
A Critical Review of the Use of 3D Printing in the Construction Industry - Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
Large-Scale 3D Printing Concrete Technology:
Current Status and Future Opportunities - Xiao Yinan, Khader Noor, Vandenberg Aileen, Lowke Dirk et al. (2022-06)
Injection 3D Concrete Printing (I3DCP) Combined with Vector-Based 3D Graphic Statics - Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing - Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete - Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
Solid Waste-Based Set-on-Demand 3D Printed Concrete:
Active Rheological-Control of Cement-Based Magneto-Rheological Fluids - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Zhou Wen, McGee Wesley, Gökçe H., Li Victor (2023-08)
A Bio-Inspired Solution to Alleviate Anisotropy of 3D Printed Engineered Cementitious Composites (3DP-ECC):
Knitting/Tilting Filaments - Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
2 Citations
- Castro-Chincho Ana, Ivorra-Martinez Juan, Perejón Antonio, Sánchez-Jiménez Pedro et al. (2025-10)
3D-Printed Mineral Limestone Structures for Calcium Looping Thermochemical Energy Storage:
Reactivity and Performance Across Cycles - Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
Optimization of Building Structures Based on Additive Manufacturing:
A Review
BibTeX
@article{lin_wang_li_bai.2025.MSFaCi3PoSSCS,
author = "Wenyu Lin and Li Wang and Zhijian Li and Gang Bai and Qiang Wang and Yao Qu",
title = "Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures",
doi = "10.1016/j.jobe.2025.113134",
year = "2025",
journal = "Journal of Building Engineering",
pages = "113134",
}
Formatted Citation
W. Lin, L. Wang, Z. Li, G. Bai, Q. Wang and Y. Qu, “Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures”, Journal of Building Engineering, p. 113134, 2025, doi: 10.1016/j.jobe.2025.113134.
Lin, Wenyu, Li Wang, Zhijian Li, Gang Bai, Qiang Wang, and Yao Qu. “Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures”. Journal of Building Engineering, 2025, 113134. https://doi.org/10.1016/j.jobe.2025.113134.