Skip to content

Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete (2025-10)

10.1007/978-3-032-08359-3_11

Kiński Wojciech, Siwicki Przemysław, Zieliński Jacek, Smater Michał
Contribution - Recent Advances in Automation, Robotics and Measurement Techniques, pp. 119-125

Abstract

The research team from Łukasiewicz-PIAP, which includes the authors of this article, proposes adapting the existing structure for 3D printing from concrete. The solution described in this article is the reconstruction of the executive tool and appropriate software of the subassembly with the selection of manufacturing process parameters. As a result of the work, an example of the use of the rebuilt structure was shown: printing full-scale concrete stairs.

6 References

  1. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  2. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
    Technology Readiness:
    A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
  3. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
  4. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
    Large-Scale Digital Concrete Construction:
    CONPrint3D Concept for On-Site, Monolithic 3D Printing
  5. Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
    Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties
  6. Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
    Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam

0 Citations

BibTeX 
@inproceedings{kins_siwi_ziel_smat.2026.AoaLSMPMMf3PfC,
  author            = "Wojciech Kiński and Przemysław Siwicki and Jacek Zieliński and Michał Smater",
  title             = "Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete",
  doi               = "10.1007/978-3-032-08359-3_11",
  year              = "2026",
  volume            = "1687",
  pages             = "119--125",
  booktitle         = "Recent Advances in Automation, Robotics and Measurement Techniques",
}
Formatted Citation

W. Kiński, P. Siwicki, J. Zieliński and M. Smater, “Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete”, in Recent Advances in Automation, Robotics and Measurement Techniques, 2026, vol. 1687, pp. 119–125. doi: 10.1007/978-3-032-08359-3_11.

Kiński, Wojciech, Przemysław Siwicki, Jacek Zieliński, and Michał Smater. “Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete”. In Recent Advances in Automation, Robotics and Measurement Techniques, 1687:119–25, 2026. https://doi.org/10.1007/978-3-032-08359-3_11.