Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine (2024-09)¶

10.24355/dbbs.084-202408160957-0

Chen Yu, Zhang Yamei, Schlangen Erik, Çopuroğlu Oğuzhan
Contribution - Supplementary Proceedings of the 4^th RILEM International Conference on Concrete and Digital Fabrication

Abstract

The discharge of desalination brine, characterized by an exceptionally high chloride salt concentration, into marine or surface water bodies poses significant threats to aquatic ecosystems. Utilizing desalination in concrete without steel reinforcement emerges as a potential sustainable solution. This study introduces an innovative approach to address these challenges, proposing the development of limestone-calcined clay-based cementitious (LC3) materials accelerated by desalination brine within an inline static mixer-based 3D concrete printing (3DCP) setup. Additionally, the effect of brine on the fresh properties and early-age hydration was also investigated.

¶

1 References

Chen Yu, Toosumran Nuttapon, Chehab Noura, Spanjers Henri et al. (2022-10)
Feasibility Study of Using Desalination-Brine to Control the Stiffness and Early-Age Hydration of 3D Printable Cementitious Materials

0 Citations

BibTeX

@inproceedings{chen_zhan_schl_copu.2024.DoSoD3PLCCBCMUDB,
  author            = "Yu Chen and Yamei Zhang and Erik Schlangen and Oğuzhan Çopuroğlu",
  title             = "Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine",
  doi               = "10.24355/dbbs.084-202408160957-0",
  year              = "2024",
  booktitle         = "Supplementary Proceedings of the 4th RILEM International Conference on Concrete and Digital Fabrication",
  editor            = "Dirk Lowke and Niklas Freund and David Böhler and Friedrich Herding",
}

Formatted Citation

IEEE

Y. Chen, Y. Zhang, E. Schlangen and O. Çopuroğlu, “Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine”, in Supplementary Proceedings of the 4^th RILEM International Conference on Concrete and Digital Fabrication, 2024. doi: 10.24355/dbbs.084-202408160957-0.

CMOS

Chen, Yu, Yamei Zhang, Erik Schlangen, and Oğuzhan Çopuroğlu. “Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine”. In Supplementary Proceedings of the 4^th RILEM International Conference on Concrete and Digital Fabrication, edited by Dirk Lowke, Niklas Freund, David Böhler, and Friedrich Herding, 2024. https://doi.org/10.24355/dbbs.084-202408160957-0.