A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing (2023-09)¶

From Analytical Modelling to Numerical Simulation

10.1016/j.dibe.2023.100241

Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko
Journal Article - Developments in the Built Environment, Vol. 16, No. 100241

Abstract

Herein, different kinds of methods for buildability quantification of 3D concrete printing are reviewed, including experimental approaches, analytical modelling, and numerical simulations. A brief introduction on printing process is first given. This discusses the material properties in different stages. Material printability, which encompasses pumpability, extrudability and buildability, is then discussed. Subsequently, a brief review of the experimental and analytical models for buildability quantification is presented and they’re discussed. An overview on the numerical tools for 3DCP is then given. These numerical models can quantify structural buildability and optimize the printing parameters, therefore, providing a more economical solution for buildability quantification. In the end, a summary and discussion on the limitations of numerical tools for buildability quantification are provided, as well as recommendations for their improvement.

¶

97 References

24 Citations

BibTeX

@article{chan_chen_schl_savi.2023.ARoMoBQoEB3CP,
  author            = "Ze Chang and Yu Chen and Erik Schlangen and Branko Šavija",
  title             = "A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing: From Analytical Modelling to Numerical Simulation",
  doi               = "10.1016/j.dibe.2023.100241",
  year              = "2023",
  journal           = "Developments in the Built Environment",
  volume            = "16",
  pages             = "100241",
}

Formatted Citation

IEEE

Z. Chang, Y. Chen, E. Schlangen and B. Šavija, “A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing: From Analytical Modelling to Numerical Simulation”, Developments in the Built Environment, vol. 16, p. 100241, 2023, doi: 10.1016/j.dibe.2023.100241.

CMOS

Chang, Ze, Yu Chen, Erik Schlangen, and Branko Šavija. “A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing: From Analytical Modelling to Numerical Simulation”. Developments in the Built Environment 16 (2023): 100241. https://doi.org/10.1016/j.dibe.2023.100241.